Source for standards, engineering specifications, manuals and technical publications

Building on the consolidated definitions of NbS, this document establishes a terminology to support the development of an agreed vocabulary, forming the basis of the standardisation process.

The EN 50483 series applies to overhead line fittings for tensioning, supporting and connecting aerial bundled cables (ABC) of rated voltage U0/U (Um): 0,6/1 (1,2) kV.
This document applies to the connections described in EN 50483-4, including branch connectors, Insulation Piercing Connectors (IPC), pre-insulated lugs (terminals) and through pre-insulated connectors (sleeves).
Two classes of connectors are covered by this document:
-   Class A: These are connectors intended for electricity distribution or industrial networks in which they can be subjected to short-circuits of relatively high intensity and duration. As a consequence, Class A connectors will be suitable for the majority of applications.
-   Class B: These are connectors for networks in which overloads or short-circuits are rapidly cleared by the operation of protection devices.
Depending on their application, the connectors are subjected to heat cycles and short-circuit current tests.
Class A: the connectors are subjected to heat cycles and short-circuit current tests.
Class B: the connectors are subjected to heat cycles only.
The object of this document is to define the heating cycles test methods and requirements which apply to compression through connectors, insulation piercing connectors and all other type of connections for low voltage aerial bundled cables.

This document specifies requirements for the contents of a technical file to demonstrate the fulfilment of regulatory requirements for an endosseous dental implant that can include:
implant body;
implant abutment;
abutment screw;
implant connecting part;
implant connecting part screw;
prosthetic screw;
implant cover screw;
transmucosal healing component.
This document also specifies requirements for intended use and performance, design attributes, components, biocompatibility, manufacturing, packaging, sterilization, shelf life, marking, labelling and information supplied by the manufacturer.
This document does not apply to the following devices:
dental implants incorporating animal or human components or bioactive characteristics;
custom-made devices that have no pre-fabricated connection;
implantable materials for bone filling and augmentation in oral and maxillofacial surgery;
membrane materials for guided tissue regeneration in oral and maxillofacial surgery;
specific instruments indicated to be used as part of a dental implant system.
NOTE 1        ISO 22794 specifies the necessary content of technical files for implantable materials for bone filling and augmentation in oral and maxillofacial surgery. ISO 22803 specifies the necessary content of technical files for membrane materials for guided tissue regeneration in oral and maxillofacial surgery. These materials require a separate technical file.
NOTE 2        ISO 13504 gives the general requirements for specific instruments indicated to be used as part of a dental implant system. These instruments require a separate technical file.
NOTE 3        Custom-made devices are defined in IMDRF/PMD WG/N49 [5].

This part of IEC 62676 specifies the functions, performance, interfaces, environmental adaptability, test methods, performance evaluation and grading rules of real-time intelligent video analysis in surveillance systems.
This document applies to live and forensic, real-time intelligent video analysis devices and systems in video surveillance.
The document is centred on testing performance and grading device functionality which enables:
• Core capability: Classification of objects, detection of specific "object activity", such as "stopping", "starting", "direction of movement", etc.
Examples are listed in Annex A.
• Complex capability: Detection of "scenarios" which are based on combinations of object activity, such as "loitering", "perimeter intrusion detection", "person down", "tailgating", "intrusion", "abandoned object detection", explosion, fire, flood, potential terrorist attack using a vehicle, owner of an abandoned bag, etc.
Examples of current scenarios are listed and described in Annex B.
• Degree of difficulty: The application of real operating environments to test the performance under known or required operating stress levels, examples of operating stress levels that are sterile or non-sterile, indoor or outdoor, target obscuration levels, extreme weather conditions, vibrating mechanical rugged environments causing image shake resulting in degradation of image quality requirement, see Table 1 and Annex C.
The purpose of this document is to provide end users, at different levels of the service process, from users and installers, integrators and maintenance companies, to certification providers, with methods to measure the performance of video analysis systems that must also comply with other parts of the standard.

The EN 50483 series applies to overhead line fittings for tensioning, supporting and connecting aerial bundled cables (ABC) of rated voltage U0/U (Um): 0,6/1 (1,2) kV.
This document defines the environmental tests in particular the climatic and corrosion ageing tests. The objective of these tests is to predict the behaviour of ABC accessories when subjected to sun radiation, to weather conditions (humidity, spraying water, heat, cold) and pollution. EN 50483-1, EN 50483-2, EN 50483-3 and EN 50483-4 specify which type tests included in this part of the standard are needed.

This document specifies the cloud computing reference architecture (CCRA).

Applies to electric storage heaters intended to heat the room in which they are located. It defines the main performance characteristics and describes methods for measuring these characteristics. It does not apply to heating appliances incorporated in the building structure, to central heating systems or to floor heating appliances.

This document applies to personal dosemeters with the following characteristics:
a)   They are worn on the trunk, close to the eye, or on the extremities.
b)   They measure the personal dose equivalents Hp(10), Hp(3), and Hp(0,07), from external X and gamma, neutron (not for Hp(3)), and beta radiations, and may measure the respective personal dose equivalent rates for the same radiations (for alarming purposes).
c)   They have a digital indication. This indication may or may not be attached.
d)   They have alarm functions for the personal dose equivalents or personal dose equivalent rates except for hybrid dosemeters. For hybrid dosemeters an alarm function for the personal dose equivalents shall be implemented in the associated readout system.

This document defines the general considerations applicable to any type of remote monitoring and control system (RMCS) used in irrigation. The document also includes some specific clauses on RMCS that fully or partially incorporate controllers developed for irrigation. These controllers are specific hardware developments designed for specific irrigation monitoring and/or control requirements. An indication is given at the beginning of each section that clearly defines when it is specifically intended for controllers developed for irrigation.

This document defines standardized and repeatable test procedures for the evaluation of blowby oil aerosol separators and filtering devices and specifies laboratory gravimetric separation efficiency and system pressure tests in both open and closed crankcase ventilation systems. This document has a limitation of 0 % to 99 % for aerosol gravimetric efficiency. NOTE Gravimetric efficiencies > 99 % can be difficult to measure due to long test durations and absolute filter weight measurements. Filter life is not evaluated in this document. This test method only applies to devices that have a defined tubular inlet, outlet and drain that can be connected to the test equipment. For devices that lack such connections, for example, one that is built into a valve cover, see Annex A.

This document specifies requirements for the optical and geometrical properties of semi-finished blanks.

This document gives guidelines for establishing severity assessment criteria for anomalies identified by airborne (AB) and structure-borne (SB) ultrasound, specifies methods and requirements for carrying out ultrasonic inspection, testing, measurement and monitoring of machines, including safety recommendations and sources of error, and provides information relative to data interpretation, assessment criteria and reporting.

This document specifies a practical procedure to create and verify distance-speed diagrams and speed curves using the parameters specified in ISO 24675-1, from which the shortest running time for railway timetabling is obtained by numerically integrating the speed curves. This document excludes running time calculation used for purposes other than timetabling.

IEC 61196-1-326:2026 specifies the test methods of clamps for laying coaxial communication cable, including mechanical test methods and environmental test methods.
This document applies to clamps for laying coaxial communication cables, including feeder and radiating cables. For requirements not covered in IEC 61914, clamps for other types of cables can also refer to this document.
This second edition cancels and replaces the first edition published in 2022. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) Addition of Clause 4 to Clause 15.

IEC 63522-41:2026 provides guidelines for the insulation coordination of electromechanical elementary, solid state, time, forcibility guided and reed relays as well reed contacts and hybrid switching solutions. This document can also be used for similar devices when specified in a detail specification.

This document specifies the requirements for an environmental management system that an organization can use to enhance its environmental performance. It is intended for use by an organization seeking to manage its environmental responsibilities in a systematic manner that contributes to the environmental pillar of sustainability. This document helps an organization to achieve the intended outcomes of its environmental management system, which provide value for the environment, the organization itself and interested parties. The intended outcomes of an environmental management system include: enhancing environmental performance; meeting compliance obligations; achieving environmental objectives. This document is applicable to any organization, regardless of size, type or nature, and applies to the environmental aspects of its activities, products and services that the organization determines it can either control or influence considering a life cycle perspective. This document does not state specific environmental performance criteria. This document can be used in whole or in part to systematically improve environmental management. Claims of conformity to this document, however, are not acceptable unless all its requirements are incorporated into an organization’s environmental management system and fulfilled without exclusion.