Search Catalog

This part of IEC 63287 specifies guidelines for a reliability qualification plan for power semiconductor modules to assure reliability targets over the entire product life.
Power semiconductor modules with incorporated control circuits are excluded. Clamped packages that need external pressure for being mounted in a system are excluded, e.g. disctype pressure pack devices.
This document is not intended for medical, military, aeronautics and astronautics-related applications.
NOTE Throughout the document, the term power semiconductor module refers to multichip semiconductor power modules as defined in 3.3.

This part of IEC 61300 describes a method for measuring the endface geometry of rectangular multifibre ferrules having an IEC defined optical interface. The primary attributes are fibre position relative to the endface, endface angle relative to the guide holes, fibre tip radii and core dip for multimode fibres.

This document specifies a test method for determining the Vickers and Knoop hardness of monolithic fine ceramics at room temperature.

This document specifies the performance and test requirements of hose assemblies supplied in assembled condition using rubber hose according to ISO 3821 up to and including nominal size 20,0, for gas welding, cutting and allied processes. This document is not applicable to high-pressure hose assemblies upstream of the pressure regulators.

This document specifies general requirements for the performance and safety of smokeless moxibustion devices. It covers smoke density, moxibustion temperature, noxious gas and test methods for smokeless moxibustion devices. This document is applicable to any combustion-type device that claims to provide smokeless moxibustion. This document does not apply to devices that imitate moxibustion, such as electro moxibustion and infrared moxibustion devices.

IEC 60086-2-2:2026 is applicable to primary batteries which are based on standardised lithium (non-aqueous) electrochemical systems.
It specifies:
- the physical dimensions,
- the discharge test conditions and discharge performance requirements.
This first edition cancels and replaces the fourteenth edition of IEC 60086-2 published in 2021. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) separation of batteries with aqueous electrolyte into a separate Part 2-1: Physical and electrical specifications;
b) maximum open circuit voltage of FR10G445 and FR14505 was changed from 1,83 to 1,90 V;
c) load of digital audio test for FR10G445 was changed from 50 mA to 75 mA and MAD was modified;
d) portable lighting test was added for FR10G445;
e) motor/toy and radio /clock /remote control test was added for FR14505;
f) in Clause 3, terms were reordered according their functions: electrochemical systems, electrochemical systems, electrical characteristics and specifications;
g) Annex D for common designation of IEC 60086 2:2021 was moved to IEC 60086 1:2026, as Annex H;
h) Annex E for Compliance checklist of IEC 60086 2:2021 was removed and merged into Annex J of IEC 60086 1:2026.

IEC 60086-2-1:2026 is applicable to primary batteries which are based on standardised electrochemical systems using aqueous electrolytes.
It specifies:
- the physical dimensions,
- the discharge test conditions and discharge performance requirements.
IEC 60086-2-1: 2026 cancels and replaces the fourteenth edition of IEC 60086 2 published in 2021. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) separation of lithium batteries into IEC 60086-2-2: Physical and electrical specifications;
b) in Clause 3, terms were reordered according to their functions: electrochemical systems, electrical characteristics and specifications;
c) TR03 and TR6 were added in Category 1, Round batteries;
d) load of digital audio test for LR03, TR03 and R03 was changed from 50 mA to 75 mA and MAD was modified;
e) personal grooming test of LR6 was added instead of high drain application test;
f) high drain application test was added for TR6;
g) radio /clock /remote control test was added for R6S;
h) CD, digital audio, wireless gaming and accessories test was removed for LR6, R6P and R6S;
i) 4,5 V of common designation was added for 3LR12, 3R12P and 3R12S;
j) Annex D for common designation of IEC 60086 2:2021 was moved to IEC 60086 1:2026, as Annex H;
k) Annex E for Compliance checklist of IEC 60086 2:2021 was removed and merged into Annex J of IEC 60086 1:2026.

The present document defines a dictionary of parameters that are commonly used in multiple TC LI specifications. Aside from defining a dictionary, the present document aims to provide technical means for other specifications to use. It is encouraged to use the present document in the development of new specifications. It is foreseen that regular maintenance of the present document is required. As such, release management requirements will be defined. Before accepting any new common parameter, the present document will provide a set of requirements the parameter has to comply to in order to become a common parameter.

’This document specifies a possible test setup and test methodology on how bearing arrangements can be tested in which the bearing outer ring instead of the inner ring is the rotating component. The bearing arrangement can be based on cartridge bearings but also on a symmetric or asymmetric combination of single row roller bearings which do not constitute a self-contained unit. This document focusses on grease lubricated bearing arrangements. A test setup for oil lubricated bearing arrangements is different.
The document also suggests test acceptance criteria based on the thermal behaviour of the bearings which takes the special loading and application conditions into consideration. This document offers the possibility to be referred to if bearing arrangements with rotating outer ring undergo performance testing in line with EN 12082-1 for conventional bearings.
The necessary type and extent of testing are specified by the deployment procedure specified in EN 12082-2, with respect to design requirements on the axlebox and its components.
A compliance with EN 12080 and EN 12081 of bearing and grease is not a pre-requisite for the application of this document.

IEC 61400-40:2026 provides the EMC requirements and test methods that apply to the individual wind turbine and all the sub systems which are part of the wind turbine.
The current document applies to measurements on individual wind turbines and not multiple wind turbines.
This document defines the requirements and test methods for the verification of the wind turbine performance against radiated emissions and the immunity of their components against conducted and radiated phenomena. This document is applicable to onshore and offshore wind turbines.

This part of IEC 61300 evaluates the effects of a number of successive cycles of mating and un-mating of fibre optic connectors or other interconnecting devices on optical performance and mechanical degradation of the component under normal usage conditions.

This document specifies strategies for risk estimation and evaluation of biological harms with respect to:
genotoxicity;
carcinogenicity;
reproductive toxicity; and
developmental toxicity.
This document is applicable when the need to evaluate a medical device for potential genotoxicity, carcinogenicity, reproductive toxicity and developmental toxicity has been established.
This document is not applicable to active pharmaceutical ingredients of device-drug combination products or biological components of device-biologic combination products which are covered by regulations.
NOTE            Guidance on selecting relevant biological effects for medical devices is covered in ISO 10993-1.

This document provides a set of properties for the description of learning resources from ISO 15836-1 and ISO 15836-2 using the framework provided in ISO/IEC 19788-1. This document specifies properties whose codomain is "literal" (as considered in early Dublin Core) and properties whose codomain is a resource class; the ISO 15836 series implicitly allowing both. This provides full interoperability at the time of expressing existing Dublin Core records with MLR, while allowing a linked data approach for the description of learning resources.

This document specifies test methods for the determination of the efficiency of frequency conversion from the electrical input, and of the available and workload microwave output power in industrial microwave heating installations, as well as operational flexibility.
This document is in principle applicable to industrial microwave heating equipment and installations in the frequency range from 300 MHz to 300 GHz but focussed on the microwave ISM frequencies below 6 GHz.
This document relates to industrial microwave heating equipment operating as intended by the manufacturer's specifications for normal operation.
This document does not apply to appliances for household and similar use (covered by IEC 60335-2-25 [1]1), commercial use (covered by IEC 60335-2-90 [2] and IEC 60335-2-110 [3]) or laboratory use (covered by IEC 61010-2-010 [4]).

IEC 60076-4:2026 applies to lightning and switching impulse tests on power transformers and reactors. Information is given on waveforms, test circuits including test connections, earthing practices, failure detection methods, test procedures, measuring techniques and interpretation of results.

This document specifies requirements for the chemical and physical properties, and for minimum performance in defined test methods, of fire extinguishing powders suitable for use against fires of classes A, B, C and D. Requirements are also given for the information and data to be declared by the manufacturer.
NOTE The classification of fires is given in ISO 3941.

This document specifies requirements, recommendations, and examples for implementing a risk-informed decision-making (RIDM) process for managing existing network assets in power systems. The intended audience concerns power network organizations' stakeholders and decision makers, such as asset managers, risk managers, regulators, asset owners, and service providers. The RIDM process details the steps to ensure transparency, consistency, and traceability of the decision by:
– specifying the risk decision-making context depending on asset management objectives, available knowledge, and risk stakeholders' concerns;
– identifying the appropriate risk management strategies and the knowledge supporting the analyses;
– detailing the essential steps for conducting a risk analysis and justifying investments, regardless of the calculation methods used;
– providing essential information and warnings to decision makers;
– implementing performance evaluation and continuous improvement.
The document is based on the asset management principles from ISO 55000:2024 [1] and is aligned with ISO 55001:2024 [2]. Compliance with the requirements of this document is independent of compliance with ISO 55001:2024 [2].

This document specifies the requirements for testing items of equipment intended for use on railway vehicles which are subsequently subjected to vibrations and shock owing to the nature of railway operational environment. To gain assurance that the quality of the equipment is acceptable, it is exposed to tests of reasonable duration that simulate the service conditions seen throughout its expected life.
Simulated long-life testing can be achieved in a number of ways each having their associated advantages and disadvantages, the following being the most common:
a) amplification: where the amplitudes are increased and the time base decreased;
b) time compression: where the amplitude history is retained and the time base is decreased (increase of the frequency);
c) decimation: where time slices of the historical data are removed when the amplitudes are below a specified threshold value.
The amplification method as stated in item a) above, is used in this document and together with the publications referred to in Clause 2; it defines the default test procedure to be followed when vibration testing items for use on railway vehicles.
Whilst this document is primarily concerned with railway vehicles on fixed rail systems, its wider use is not precluded. For systems operating on pneumatic tyres, or other transportation systems such as trolleybuses, where the level of shock and vibration clearly differ from those obtained on fixed rail systems, specific test levels can be considered. In that case, the frequency spectra and the shock duration and amplitude are computed in compliance with the guidelines in Annex A.
Annex F provides the functional random vibration load that can be considered by the user for urban vehicles operating on pneumatic tyres.
This document applies to single axis testing. However, multi-axis testing is possible.
The anchoring bolts at the fixing point(s) of the equipment are not evaluated in this document.
This document is intended to evaluate equipment which is attached to the main structure of the vehicle (and components mounted thereon). It is not intended to test equipment which forms part of the main structure. Main structure in the sense of this document means car body, bogie and axle.
The following items are out of scope of this document:
– the traction motors for railway vehicles;
– any mechanical substructure not equipped with electrical, electronic or pneumatic component.
Additional or special vibration tests for some specific equipment are not specified in this document, for example:
a) equipment mounted on, or linked to, items which are known to produce defined frequency excitation;
b) equipment such as pantographs, shoegear, or suspension components which are known to be exposed to specific shock and vibration excitation;
c) equipment intended for use in special operational environments as specified by the customer;
d) transportation and handling tests.

The present document specifies the general aspects of HI2 and HI3 interfaces for handover via IP based networks. The present document:
• specifies the modular approach used for specifying IP based handover interfaces;
• specifies the header(s) to be added to IRI and CC sent over the HI2 and HI3 interfaces respectively;
• specifies protocols for the transfer of IRI and CC across the handover interfaces;
• specifies protocol profiles for the handover interface.
The present document is designed to be used where appropriate in conjunction with other deliverables that define the service-specific IRI data formats (including ETSI TS 102 227 [i.1], ETSI TS 101 909-20-1 [33], ETSI TS 101 909-20-2 [34], ETSI TS 102 232-2 [5], ETSI TS 102 232-3 [6], ETSI TS 102 232-4 [32], ETSI TS 102 232-5 [37], ETSI TS 102 232-6 [36] and ETSI TS 102 232-7 [38]). Where possible, the present document aligns with 3GPP TS 33.108 [9] and ETSI TS 101 671 [4] and supports the requirements and capabilities defined in ETSI TS 101 331 [i.9] and ETSI TR 101 944 [i.4].
For the handover of intercepted data within GSM/UMTS PS and CS domains, the present document does not override or supersede any specifications or requirements in 3GPP TS 33.108 [9].
For the handover of services defined in 3GPP TS 33.128 [46], in the event of conflict between the present document and 3GPP TS 33.128 [46], the terms of 3GPP TS 33.128 [46] apply.

This part of IEC 61850 specifies the logical node classes for use in the domain of hydroelectric power stations, steam and gas turbines.
This IEC61850 domain information model standard utilizes the existing Logical Node (LN) classes defined in IEC 61850-7-4, Basic communication structure – Compatible logical node classes and data object classes where possible, while defining new and extended domain specific LN classes to provide the necessary data objects for application to functions and systems in the domain of hydroelectric power stations, steam and gas turbines. The domain information model includes the interface towards a central operator centre’s control functions.
The Scope of this document, related to steam and gas turbine specifics, is limited to overall control functions and generator and turbine control functions. For hydroelectric power, the scope includes the entire power station automation system.
Edition 3 is intended to form a basis for extensions in local implementations. Such extensions may be defined in profiles. Many of the Logical Nodes defined in this document are designed to be suitable for use in domains beyond the scope of hydro power plants and steam and gas turbines. A suggested structure of the Logical Nodes into packages for integration with other domains is provided in Annex G (informative), Migration of this document to the future edition of IEC 61850.

This part of the EN 50117 series which is a sectional specification applies to coaxial indoor drop cables for analogue and digital one and two way signal transmission, e.g. for cable networks for television signals, sound signals and interactive services in accordance with EN 60728 1:2014, EN 60728 1 1:2014, EN 60728 101:2017, EN 60728 10:2014, EN 50173 1:2018 and EN 50173 4:2018. This also includes the transmission of BCT signals provided by a CATV, MATV or SMATV cable network.
The purpose of this document is to specify the applicable test methods and requirements for the electrical, mechanical and environmental characteristics and for fire performance of the cables.

This part of IEC 62271 is applicable to prefabricated solid-insulation enclosed switchgear and controlgear assemblies designed for:
– alternating current;
– rated voltages above 1 kV and up to and including 52 kV;
– service frequencies up to and including 60 Hz;
– indoor installation;
– areas limited to authorized personnel.
The assembly can include either air-insulated or fluid-filled compartments, or both. For components installed in a solid-insulation enclosed switchgear and controlgear, this
document supplements or even replaces in some cases, the requirements as stated by the individual product standards.
The list of components which can be inside the solid-insulation enclosed switchgear and controlgear is not limited to the ones explicitly cited in this document.

This document specifies safety requirements and test methods for oil lamps used for decorative purposes in households, in restaurants, in recreational facilities and in similar areas. This document specifies the requirements and test methods for cartridges that are intended for forming oil lamps for decorative purposes in conjunction with further accessories. This document covers re-fillable and non-re-fillable decorative oil lamp.
This document does not apply to oil lamps intended to be a primary source of light or for functional purposes (e.g. lighting for boats, mountain huts and securing of road building sites).
The purpose of this document is to minimize the risk of accidental poisoning of small children up to three years of age by limiting the accessibility of the lamp oil.

This document specifies test methods for surface electromyography (sEMG) sensors by evaluating the quality of sEMG signals obtained from contracting the muscles of the forearm and hand for wearable applications. It is applicable to sEMG sensors that are used to decipher movement intentions and use them as control signals in situations such as virtual reality, game, unmanned aerial vehicles (UAV), robot control, and home automation. This document does not apply to sEMG sensors intended for medical diagnosis or treatment. For medical devices, national requirements can apply.

This document specifies test methods for the determination of useful high frequency power output in equipment for industrial heating and processing of materials. It is in particular applicable to HF generators made available to users as separate units.
This document is basically applicable to equipment operating in the frequency range 100 kHz to 300 MHz, as defined in IEC 60519-1, with the following limitations.
– This document does not apply to induction heating, which it is possible to carry out in the lower part of the specified frequency band.
– The ISM centre frequencies for dielectric heating and processing of industrial interest are narrow bands about 6,78 MHz, 13,56 MHz, 27,12 MHz and 40,68 MHz.
– This document is not applicable to:
• appliances for household and similar use;
• commercial use;
• laboratory use;
• medical high frequency equipment.
For equipment working in designated ISM bands, it is a legal requirement that the frequency remains within the ISM bands according to CISPR 11, but the resonant frequency of the circuit varies with the change of dielectric parameters of the load. Therefore, the value of the mean output power in the work cycle can be much lower than the value obtained under the test conditions. This value depends upon the response of the tuning system.
NOTE 1 The following criteria are suitable for determination of the classification as industrial equipment:
– commercial equipment is typically designed and planned for series production of many identical units;
– industrial equipment is typically produced in small series or even as single units; the processed goods are consumed or ready for final use at the end of the heating process.
NOTE 2 Heating a workload with dielectric parameters which change significantly in time and/or with temperature, the value of the output power obtained with the actual charge can be different from that obtained with the test load specified in this document.
This document relates to equipment normally operating under continuous rated conditions.

This part of IEC 62228 specifies test and measurement methods for the EMC evaluation of CXPI transceiver ICs under network condition. It defines test configurations, test conditions, test signals, failure criteria, test procedures, test setups and test boards. This specification is applicable for standard CXPI transceiver ICs and ICs with embedded CXPI transceiver and covers
– the emission of RF disturbances;
– the immunity against RF disturbances;
– the immunity against impulses;
– the immunity against electrostatic discharges (ESD).

This European standard deals with the safety of electric commercial amusement machines and personal service machines, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances, including direct current (DC) supplied appliances and battery-operated appliances

This document specifies the method of the peel test using a tensile testing machine to evaluate the adhesion strength of metallic coatings on plastic substrates under controlled temperatures. It also specifies the designations of the peel test results. The designation consists of the adhesion of metallic coatings to the substrate and test temperature, as well as the substrate material and the principal component, manufacturing process and thickness of the metallic coatings.

This document specifies a procedure for determining hydroxyacyl-coenzyme A dehydrogenase (HADH) activity in poultry meat samples by spectrophotometry. The results provide an indication of whether poultry breast meat has been previously frozen, based on the ratio of relative HADH activity, and can be used to verify the labelling of poultry breast meat sold as chilled poultry.
This document is applicable specifically to chicken breast meat. It is not applicable to other cuts and/or types of meat unless these have been validated and appropriate limits have been established.
When following the procedure outlined in this document, for a single sample pressing results in 96,6 % of samples being correctly classified. If a correct classification rate of 99,9 % is required, three sample pressings are necessary; i.e. three chicken breasts (one pressing from each), selected randomly from a batch.
This document is not applicable to minced meat or to poultry preparations.

This European standard deals with the safety of electric commercial amusement machines and personal service machines, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances, including direct current (DC) supplied appliances and battery-operated appliances

This European standard deals with the safety of electrically operated commercial rinsing sinks used in commercial kitchens, their rated voltage being not more than 250 V for single-phase appliances connected between one phase and neutral, and 480 V for other appliances

This European Standard deals with the safety of microwave appliances intended for commercial use, their rated voltage being not more than 250 V for single-phase appliances connected between one phase and neutral and 480 V for other appliances.

This European Standard deals with the safety of electric vaporizers for household and similar use, their rated voltage being not more than 250 V including direct current (DC) supplied appliances and battery-operated appliances

This document provides a semantic base that allows the representation of relevant information related to tourism destinations, including resources and services within the destination, travel experiences, and the destination itself. It establishes the terminology, hierarchy, and the minimum properties and relationships required for the definition of a reference semantic structure, ensuring the interoperability of local, territorial and country tourism information technology (IT) platforms with third-party digital systems. This document provides tourism destinations with semantic data structures that primarily benefit final users (i.e. tourists and other interested parties), as these structures allow destinations to provide access to relevant information in an intuitive and agile way, and improve the interaction between tourists and the systems that manage, publish, carry transactions and accompany tourists during their journey. Furthermore, destination managers, data managers and data publishers, applying this document can also benefit from such implementation.

This document specifies the toughness requirements of metallic materials for use at a temperature below −80 °C to ensure their suitability for cryogenic vessels. This document does not apply to unalloyed steels and cast materials.

The present document applies to the following radio equipment type:
• User Equipment for Evolved Universal Terrestrial Radio Access (E-UTRA).
This radio equipment type is capable of operating in all or any part of the frequency bands given in tables from 1-1 through 1-5.

This European Standard deals with the safety of electric ondol-mattresses for household and similar purposes, their rated voltage being not more than 250 V including direct current (DC) supplied appliances and battery-operated appliances. This standard also applies to control units supplied with the appliance

The present document defines Product Specific Requirements for Life Cycle Assessment (LCA) of Smartphones so that it is possible to compare the LCA between different smartphone models on SKU level (e.g. considering different memory configurations). The present document provides a methodology for evaluating the environmental impact of smartphones objectively and transparently and is based upon the Life Cycle Assessment (LCA) framework standardized in ETSI ES 203 199 [1] and IEC 63366 [i.1]. The purpose of the present document is to:• Provide smartphone-specific requirements, i.e. Product Specific Rules (PSR), in addition to those of ETSI ES 203 199 [1] and IEC 63366 [i.1] to ensure comparability of LCA studies of smartphones on SKU level. • Harmonize the LCAs of smartphones. • Increase the transparency and facilitate the interpretation of LCA studies of smartphones. • Facilitate the communication of LCA studies of smartphones on SKU level. The present document is valid for all types of smartphones. Moreover, the present document defines a set of requirements for which the LCA practitioners will comply. Comparisons of results from LCA studies of smartphones which belong to the same product family, including assessments which have been performed by different organizations, are within the scope of the present document.

This European Standard deals with the safety of electric ondol-mattresses for household and similar purposes, their rated voltage being not more than 250 V including direct current (DC) supplied appliances and battery-operated appliances. This standard also applies to control units supplied with the appliance

This European standard deals with the safety of electrically operated commercial rinsing sinks used in commercial kitchens, their rated voltage being not more than 250 V for single-phase appliances connected between one phase and neutral, and 480 V for other appliances

This European Standard deals with the safety of electric vaporizers for household and similar use, their rated voltage being not more than 250 V including direct current (DC) supplied appliances and battery-operated appliances

This European Standard deals with the safety of microwave appliances intended for commercial use, their rated voltage being not more than 250 V for single-phase appliances connected between one phase and neutral and 480 V for other appliances.

IEC 60794-1-102:2026 specifies the test procedures used to establish uniform requirements on abrasion resistance for optical fibre cables.
This document applies to optical fibre cables for use with telecommunication equipment and devices employing similar techniques, and to cables having a combination of both optical fibres and electrical conductors.
Method E2A evaluates the ability of the sheath to resist abrasion; method E2B evaluates the ability of cable markings (include text or graphic markers, and continuous coloured lines on cable) to resist abrasion.
This first edition of IEC 60794-1-102 cancels and replaces Method E2 of the first edition of IEC 60794-1-21 published in 2015.
This edition includes the following significant technical changes with respect to the previous edition:
a) addition of sample surface cleaning requirements;
b) addition of the number of tests to be performed for method E2B;
c) addition of details to be reported.

This document specifies requirements and gives recommendations for the qualification and design, installation, testing and integrity management for the external application of composite repair systems to corroded or damaged piping and pipelines, tanks and vessels.

IEC 60953-4:2026 is intended to establish a Supplementary Standard for routine test of steam turbines. The rules given in this document follow the guidance given in IEC 60953-0, but contain amendments and supplements regarding the analysis and supervision of relative performance by routine testing of steam turbine.
General principles for the preparation, performance evaluation, trends of performance parameters and the determination of the measurement uncertainty of periodic routine tests are given in this document.
This document is applicable to routine testing covering a wide range of accuracy on steam turbines of every type, rating and application, operating with superheated or saturated steam.
This document is not intended for application in acceptance tests of new units or retrofits and its application for such is strongly not recommended.
The purpose of this document is to cover the existing steam turbine components which influence the efficiency of the power plant. This document helps the parties determine the most appropriate parameters that characterize the relative performance change and that could be used as long-term performance monitoring and analysis.

This document provides a taxonomy, reference model, considerations for a security framework and a security problem definition for digital currency hardware wallets (DCHWs). It also specifies security objectives to address security issues related to the security problem definition. This document is applicable to organizations that develop and operate DCHWs, e.g. mobile device manufacturers, chip manufacturers and companies that provide DCHW solutions. This document is also relevant to third parties that provide services to these stakeholders. It addresses sovereign or fiat digital currencies issued by a specific entity, e.g. a central bank.

IEC 63584-210:2026 The Open Charge Point Protocol (OCPP) provides the communication between a Charging Station and a Charging Station Management System (CSMS) and is designed to accommodate any type of charging technique.
It is based on Open Charge Point Protocol 2.1 and was submitted as a Fast -Track document.
This second edition cancels and replaces the first edition published in 2025. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) part 5 and 6 have been introduced, which contain the certification profiles responsible for the test cases;
b) resolved issues and added clarifications to the specification, most of which are related to newly in OCPP 2.1 introduced features like; DER control, V2X, ISO 15118-20, based on lessons learned from the market;
c) all OCPP 2.0.1 errata also have been incorporated into OCPP 2.1, due to the versions being backwards-compatible.