Search Catalog

1.1 This document specifies a sampling method for a consignment of instant coffee, shipped in 10 package units or more.
This document is applicable to cases which have inner linings of moisture-resistant material hermetically sealed because of the hygroscopic nature of instant coffee and which are in package units greater than 10 kg net mass, typically up to 50 kg. This document is also applicable to units of more than 50 kg, usually called “big bags” or “supersacks”. The cases are generally made of cardboard of appropriate strength and the big bags are made of suitable plastic material.
1.2 This document is also applicable to the selection and preparation of a sufficiently representative sample of the consignment, which is intended:
a) to serve as a basis for an offer for sale;
b) for examination to verify that the instant coffee to be offered for sale satisfies the producer’s sales specification;
c) for examination to determine one or more of the characteristics of the instant coffee for technical, commercial, administrative and arbitration purposes;
d) for retention as a reference sample for use, if required, in litigation.
1.3 This document is applicable to all types of instant coffee, as defined in ISO 3509, contained in all types of units with liners, with the exception stated in 1.4.
1.4 For bulk density and particle size, this document is applicable to spray-dried powder and freeze-dried instant coffees only, as defined in ISO 3509, due to the intrinsic fragility of particles of agglomerated instant coffee, which leads to greater breakdown and headspace in the final packed units for the consumer.

The present document applies to Mobile Earth Station (MES) radio equipment which have the following characteristics:
• the MES has both transmit and receive capabilities and operate in a Satellite-Personal Communications Network (S-PCN). An S-PCN MES can be a handheld, portable, vehicle-mounted, host connected, semi-fixed or fixed equipment, or can be an element in a multi-mode terminal. It consists of a number of modules with associated connections and user interface, or can be a self-contained single unit;
• these MESs are controlled and monitored by Control Monitoring Functions (CMF). The CMF is outside the scope of the present document;
• if the MES is an element in a multi-mode terminal, unless otherwise stated in the present document, its requirements apply only to the S-PCN MES element of the terminal operating in the MSS frequency bands given in table 1;
• the MES is capable in operating in all or part of the frequency bands shown in table 1.
NOTE: The relationship between the present document and essential requirements of article 3.2 of Directive 2014/53/EU [i.3] is given in annex A.

This document is applicable to electronic cigarettes and similar vapour producing devices intended to produce aerosol from e-liquids for consumption by inhalation. It is applicable to devices intended for use with e-liquids. This document is also applicable to e-liquid containers.
This document:
— specifies the considerations and approach required to establish levels of extractable and leachable substances in vaping products, e-liquid cartridges, and e-liquid refill containers;
— specifies a risk-based approach to enable manufacturers to understand the risk associated with the levels of extractable and leachable substances;
— describes an approach to toxicological risk assessment that contributes to an understanding of whether leachable compound levels are within acceptable limits over the anticipated shelf life of the product;
— builds on the requirements of CEN/TS 17287:2019, 5.1 [10] Material (migration) by detailing an analytical and toxicological approach to establish that “no e-liquid contact material shall transfer constituents into the e-liquid at levels that endanger human health”
— does not consider that substances may also transfer directly to the user via direct contact with components as this consideration is included in CEN/TS 17287;
— does not specify all testing necessary to establish the shelf life of products.

This document specifies the requirements for dried thyme (Thymus vulgaris L.) in the form of rubbed leaves.
Recommendations relating to storage and transport conditions are given in Annex A.

The present document specifies technical characteristics and methods of measurements for Mobile Earth Stations (MES) providing Low Bit Rate Data Communications (LBRDC) using Low Earth Orbit (LEO) satellites and which have the following characteristics:
- the MES as covered by the present document are a Based MES (BMES), a Vehicle mounted MES (VMES), or a Portable MES (PMES);
- the MESs operate through satellites in Low Earth Orbit (LEO) as part of a network providing Low Bit Rate Data Communications (LBRDC);
- these radio equipment are designed to operate in all or any part of the frequency bands given in table 1.
- The MESs have to be part of a satellite network and controlled and monitored by a Network Control Facility (NCF). The specification of the NCF is outside the scope of the present document.
NOTE 1: The acronyms "MSS" and "mss" refer to mobile satellite service (See list of abbreviations). Capital letters "MSS" refer to Primary MSS service. Lower case "mss" refers to secondary MSS service.
The present document is intended to cover the provisions of article 3.2 of Directive 2014/53/EU [i.3] (RE Directive).
NOTE 2: The relationship between the present document and essential requirements of article 3.2 of the Directive 2014/53 [i.3] is given in Annex A.

This document specifies the requirements of winter savory (Satureja montana Linnaeus) in the form of sprigs, and whole or broken leaves.
It does not apply to summer savory (Satureja horfensis Linnaeus), which forms the subject of ISO 7928-2.
Recommendations relating to storage and transport conditions are given in Annex A.

This document specifies the requirements for design, manufacture and installation of metal bellows expansion joints with circular cross section for pressure applications with maximum allowable pressure greater than 0,5 bar.

This document specifies requirements for black pepper (Piper nigrum L.) (see ISO 676), whole or ground at the following commercial stages:  
non-processed black pepper (NP) or semi-processed black pepper (SP);
processed black pepper (P), which can, in certain cases, be re-sold directly to the consumers.  
This document does not apply to black pepper categories called “light”.
NOTE Specifications for white pepper are given in ISO 959-2.
Recommendations relating to storage and transport conditions are given in Annex C.
Information regarding the microscopic structure of the pepper berry is given in Annex D.

The present document specifies technical characteristics and methods for measurements for satellite communications Earth Stations (ES) with the following characteristics:
• The ES is designed for stationary operation.
• The ES is operating as part of a satellite network (e.g. star, mesh or point to point) used for the distribution and/or exchange of information.
• The transmit and receive frequencies are shown in Table 1.
• The ES transmits within the frequency range from 27,5 GHz to 29,1 GHz and 29,5 GHz to 30,0 GHz, which are bands allocated to the Fixed Satellite Services (FSS) (Earth-to-space) among other services.
• At the national level, terminals covered by the present document, might operate on a co-frequency basis, with stations of other FSS networks / systems or with stations of other services. The present document does not cover requirements for ensuring protection of such services.
• The ES receives within the range from 17,30 GHz to 20,20 GHz (FSS).
• The ES uses linear or circular polarization.
• The ES operates through non-geostationary satellites.
• The ES is designed for unattended operation and it does not address specifications or requirements for earth stations operating as gateways or master earth station.
• The ES is controlled and monitored by a Network Control Facility (NCF). This function may be performed centrally (e.g. for a network of ESs with a central hub) or it could be performed within the ES for autonomous control. The NCF is outside the scope of the present document.
• The ES has one or more directive antennas that track satellites. The present document may also be applicable to the frequency bands 30,0 GHz to 31,0 GHz (Earth-to-space) and 20,2 GHz to 21,2 GHz (space-to-Earth) subject to national regulation.
The present document applies to the ES including its ancillary equipment and its various telecommunication ports, and when operated within the boundary limits of the operational environmental profile as defined by the intended use of the ES. NOTE: The relationship between the present document and essential requirements of article 3.2 of Directive 2014/53/EU [i.1] is given in annex A.

This document specifies when and how to conduct reviews and controls within the field of fire safety design, from planning and design to construction and finally, operation and maintenance.
This document describes reviews and controls, independent of national regulations, with a primary focus on technical issues within fire safety engineering. It describes how the fire safety design process, including engineering approaches, forms a normal part of the overall control and review of the building process and defines eligibility criteria for the parties performing the controls.

This document specifies a method for the determination of piperine content of peppers (Piper nigrum Linnaeus), whole or ground, as well as their extracts (Oleoresins) by high performance liquid chromatography.
This method also enables the separation and, if necessary, the determination of the other alkaloids of pepper (isochavicine, isopiperine and piperittin).

This document specifies methods for the olfactory and visual examination and determination of foreign matter and defects in green coffee from all origins. These methods can also be used for determining one or more of the characteristics of green coffee with an impact on coffee quality for technical, commercial, administrative and arbitration purposes, and for quality control or quality inspection.
This document is applicable to green coffee as defined in ISO 3509.

This document specifies the requirements for dehydrated tarragon (Artemisia dracunculus Linnaeus) (methylchavicol type; also called “estragole -type tarragon”) in the form of whole or cut leaves and powder.
It does not apply to the elemicin-sabinene-type tarragon.
Recommendations relating to storage and transport conditions are given in Annex A.

This document specifies the requirements of summer savory (Satureja hortensis Linnaeus) in the form of sprigs, and whole or broken leaves.
It does not apply to winter savory (Satureja montana Linnaeus), which forms the subject of ISO 7928-1.
Recommendations relating to storage and transport conditions are given in Annex A.

This document specifies the requirements for pimento or allspice [Pimenta dioica (L.) Merr.], whole or ground.
Recommendations relating to storage and transport conditions are given in Annex A.

This document specifies requirements for white pepper (Piper nigrum L.) (see ISO 676), whole or ground, at the following commercial stages:  
semi-processed white pepper (SP);
processed white pepper (P).  
This document is not applicable to white pepper categories called “light”.
NOTE Specifications for white pepper are given in ISO 959-1.
Recommendations relating to storage and transport conditions are given in Annex B.

This document provides a set of professional role profiles as typically applied in an organisation in the area of artificial intelligence (AI) and a set of educational profiles that translate these organisation needs into educational terms. It builds on existing CEN reports, specifically the European e-Competence Framework ("e-CF"; EN 16234-1), the ICT Professional Role Profiles (CWA 16458), and the Guidelines for Developing ICT Professional Curricula (CEN/TS 17699).
It provides a high-level framework for AI role profiles, outlining elements such as tasks, deliverables, competences (aligned with the e-CF), AI descriptors, and AI skill areas. It is intended as an illustrative and exploratory resource rather than a prescriptive standard. The profiles and components presented here are designed to inspire and support organisations in shaping their own approaches, allowing them to select, adapt, and combine elements in ways that best fit their specific context. Recognising that real-world applications vary widely, this document encourages flexible use and interpretation rather than strict adherence.
Within this framework, tasks describe the key activities associated with a role, while deliverables capture the expected outputs or results. Competences, based on the e-CF, provide a structured view of the knowledge and capabilities required. AI descriptors and AI skill areas further contextualise these roles by highlighting AI-specific responsibilities and domains of expertise. Together, these elements offer a modular structure that can be tailored to different organisational needs.
In addition, the document extends these role profiles into an educational perspective by translating roles and competences into indicative learning outcomes and approaches to assessment. This linkage is intended to support education and training providers in designing programmes that align with emerging AI roles, while remaining adaptable to different pedagogical models and contexts.
This CWA aligns with activities and standards developed in the context of ISO/IEC JTC 1 SC 42 and CEN-CENELEC JTC 21 for Artificial intelligence. JTC 21 produces and adopts standardization deliverables to address European market and societal needs and to underpin primarily EU legislation, policies, principles, and values. JTC 21 plays a pivotal role in implementing the EU AI Act by developing harmonized standards.
This CWA has been developed at the intersection of AI and ICT professionalism, which is the focus of CEN/TC 428 ICT Professionalism and Digital Competences the committee that supports the development of digital skills across sectors. It focuses on competences, education, ethics, and knowledge frameworks, helping to close the digital skills gap in Europe.

The present document specifies the Service Information (SI) data which forms a part of Digital Video Broadcasting (DVB) bitstreams, in order that the user can be provided with information to assist in selection of services and/or events within the bitstream, and so that the Integrated Receiver Decoder (IRD) can automatically configure itself for the selected service. SI data for automatic configuration is mostly specified within ISO/IEC 13818-1 [1] as Program Specific Information (PSI). The present document specifies additional data which complements the PSI by providing data to aid automatic tuning of IRDs, and additional information intended for display to the user. The manner of presentation of the information is not specified in the present document, and IRD manufacturers have freedom to choose appropriate presentation methods. It is expected that Electronic Programme Guide (EPG) will be a feature of Digital TeleVision (TV) transmissions. The definition of an EPG is outside the scope of the present document (i.e. the SI specification), but the data contained within the SI specified in the present document may be used as the basis for an EPG. Rules of operation for the implementation of the present document are specified in ETSI TS 101 211 [i.1].

This document defines the terms used in the ISO standards on the identification of medicinal products (IDMP) and their related technical specifications.

This document:
provides requirements and guidance for the management of identity information and for ensuring that an identity management system conforms to ISO/IEC 24760-1 and ISO/IEC 24760-2;
is applicable to any information system where information relating to identity is processed or stored;
is considered to be a horizontal document for the following reasons:
it applies concepts such as distinguishing the term “identity” from the term “identifier” on the implementation of systems for the management of identity information and on the requirements for the implementation and operation of a framework for identity management,
it provides an important contribution to assess identity management systems with regard to their privacy-friendliness and their ability to assure the relevant attributes of an identity, and consequently it provides a foundation and a common understanding for any other standard addressing identity, identity information, and identity management.

This document describes a methodology for specifying the privileges necessary to access electronic health record (EHR) data. This methodology forms part of the overall EHR communications architecture defined in ISO 13606-1 [17].
This document seeks to address those requirements uniquely pertaining to EHR communications and to represent and communicate EHR-specific information that will inform an access decision. It also refers to general security requirements that apply to EHR communications and points to technical solutions and standards that specify details on services meeting these security needs.
NOTE            Security requirements for EHR systems not related to the communication of EHRs are outside the scope of this document.

This document contains test results on RLAN interference to CEN DSRC devices, including the setup and execution of the tests, along with the main findings

This document defines the requirements for a system of concepts for different aspects of the provision of care encompassing social care as well as clinical care. The focus of this document is continuity of care.
This document defines requirements for a system of concept definitions needed to describe health and care businesses. Concept systems conforming to this document can be used to support the development of:
logical reference models within the information viewpoint as a common basis for semantic interoperability on international, national or local levels;
information systems;
information for specified types of care processes.
This document does not specify how to perform specific care processes. This document does not cover research processes in the context of social and clinical care, welfare and educational processes.

The scope of this TR is a Public Transport common glossary to harmonise terms and definitions from existing data dictionaries.
The methodology consisting of highlighting the differences between various use contexts arises from a number of factors, many of them practical:
1) The facts of history. Many of the legislations, as noted (especially EU Regulations, EC Delegated Regulations and EC Implementing Decisions), already have mandatory application of varying scope, and the regulatory bodies would be most unlikely to consider it worthwhile to actually modify them in line with some list of precise terms developed after the fact.
2) The diversity of practices and use-cases which have been included in the Public Transport domain. Especially as a result of the need for this domain to cover multi-modality and developing technologies, and the increasing requirement for Public Transport to interact with wider domains such as Road Traffic Management, there are bound to be some deeply embedded terms which have been used in different senses in different domains.
3) The differing nature and working practices involved in the legislative, regulatory and technical standardisation processes, and their relationship both to one another and to real-world implementors of Public Transport services.
4) The prior existence of a well-established and precise set of Conceptual Models, including terms and definitions, in the Transmodel ecosystem. This is self-consistent and clearly defined and is being maintained on a continuous basis. However, its use in a legislative context is by “delegation”, which may do little to decrease the possibility of regulations themselves making use of some terms in a sense not intended by Transmodel itself.
The format of the glossary will be structured around following sections:
-   Contexts: Summary of the contexts in which the term or phrase is defined.
-   Related terms: Phrases in which the term is used, either as an element in a compound (e.g. the term “access” vs “access right” or where a related term is used which carries a notably different association (e.g. the term “access” vs “accessibility”, where the latter has a precise meaning in some contexts).
-   Concept: Where it is possible to identify a unifying concept among the various definitions. An informal or explanatory summary of that concept. Where it is not possible, a note of that fact.
-   Harmonisation: Containing references and links to the definitions in their contexts and the suggested conventions for citing them in contexts other than those where they are defined.
-   Source references: Links to definitions of the exact term in their contexts.
-   Usage recommendations: Recommendations for how the terms should be cited in contexts outside that in which the term is defined.

The present document specifies technical characteristics and methods of measurements for wireless microphones, similar RF audio link equipment, cordless audio (including low power Band II transmitters), in-ear monitoring, cochlear implant and assistive listening devices, intended for the transmission of music and speech including the associated ancillary equipment in respect of electromagnetic compatibility, as detailed in table 1. Technical specifications related to the antenna port and emissions from the enclosure port of the radio equipment are out of scope of the present document. Such technical specifications are found in the relevant product standards for the effective use of the radio spectrum, see table 1. The present document specifies the applicable test conditions, performance assessment and performance criteria for wireless microphones, similar RF audio link equipment, cordless audio, in-ear monitoring, ALD and Cochlear Implants and associated ancillary equipment. This equipment can use analogue or digital modulation techniques.
For cochlear implants more stringent EMC standards exist and Annex E provides information on its relationship to the present document.
NOTE 1: Technical specifications related to conducted emission EMC requirements below 9 kHz on the AC mains port of radio equipment are out of scope of the present document. Such technical specifications are normally found in the relevant product family standards for AC mains powered equipment (e.g. EN 61000-3-2 [i.6] and EN 61000-3-3 [i.7]).
NOTE 2: The relationship between the present document and essential requirements of article 3.1(b) of Directive 2014/53/EU [i.1] is given in Annex A.

This document specifies interoperability requirements for personal health decision support (PHDS) services between actors in the PHDS environment, which include PHDS services, data providers, and PHDS clients. It includes requirements for data exchange, validation, and error handling among participants to support accurate and timely decision-making. It also describes the privacy and security considerations for PHDS. However, the specifics of how PHDS services are developed or implemented are not covered.

This document describes the basic requirements for the verification of ultimate and serviceability limit states and the resistance to fatigue either of the noise barrier or its components by means of analytical methods and/or tests.
Analytical methods can be used for the determination of the characteristic values and design values.
Where sufficient information is not available, the analytical procedure can be combined with results from tests.
This document provides the following types of test procedures:
- test on small samples for defining detail categories, which might not be covered by Eurocodes (verification procedure A);
- test on a global element for defining the limit state against fatigue (verification procedure B);
- full scale tests under a given representative loading (verification procedure C) to determine fatigue resistance of the noise barrier components for defined loading conditions; verification procedure C is given as alternative to verification procedures A and B.

This document establishes comprehensive frameworks and models for innovative developments in procurement across all sectors, providing systematic methodologies and organizational frameworks enabling transformation of procurement practices through structured governance and innovation management.
This document applies to:
—   Organizations
•   public sector procurement authorities at local, regional, national, and European levels;
•   private sector organizations engaging in innovation partnerships with public entities;
•   research and development institutions participating in cross-sector innovation;
•   SMEs and large enterprises involved in public-private innovation ecosystems;
•   international organizations seeking to implement European innovation procurement approaches.
—   Innovation Coverage
•   cross-sector innovation frameworks applicable to both public and private organizations;
•   enhanced Pre-Commercial Procurement (PCP) and Public Procurement of Innovation (PPI) frameworks;
•   system-of-Systems (SoS) orchestration for complex multi-organizational coordination;
•   four-dimensional innovation architecture covering business models, operations, sourcing, and technology.
—   Framework Applications
•   strategic innovation planning and implementation across organizational boundaries;
•   digital transformation and technology integration for all sectors;
•   circular economy and sustainable procurement models;
•   cross-border collaboration and harmonization mechanisms.

This document applies to:
Organisations:
-   public sector procurement authorities at local, regional, national, and European levels;
-   private sector organizations engaging in innovation partnerships with public entities;
-   research and development institutions participating in cross-sector innovation;
-   SMEs and large enterprises involved in public-private innovation ecosystems;
-   international organizations seeking to implement European innovation procurement approaches.
Innovation Dimensions:
-   dimension A: Business Model Innovation (Strategic and Tactical) - 13 innovations across circular economy, product-as-service, and collaborative models;
-   dimension B: Innovative Operational Procurement - 12 innovations including enhanced PCP/PPI integration and seven-procedure frameworks;
-   dimension C: Innovation Sourcing Infrastructure - 5 high-impact innovations encompassing digital portfolios, AI-driven analytics, and federated intelligence;
-   dimension D: Technological Innovation - 20 innovations covering IoT, blockchain, AI, quantum computing, and emerging technologies.
Legal Framework Coverage:
-   cross-sector innovation authorization beyond traditional PCP/PPI scope;
-   innovation sandbox and safe harbor mechanisms for experimental approaches;
-   cross-border legal harmonization for international standards development;
-   system-of-Systems legal orchestration for complex multi-organizational coordination;
-   liability limitation and risk protection frameworks for good faith innovation.
Scope Exclusions
This document does not cover:
-   traditional procurement of standard goods and services without innovation components;
-   sector-specific legal frameworks that do not involve cross-sector collaboration;
-   emergency procurement procedures where innovation is not the primary objective;
-   military and defense procurement subject to specific security classifications;
-   legal frameworks for routine administrative procurement below innovation thresholds.

This document:
defines terms for identity management and specifies core concepts of identity and identity management, and their relationships;
is applicable to any information system where information relating to identity is processed or stored;
is considered to be a horizontal document for the following reasons:
it applies concepts such as distinguishing the term “identity” from the term “identifier” on the implementation of systems for the management of identity information and on the requirements for the implementation and operation of a framework for identity management, 
it provides an important contribution to assess identity management systems with regard to their privacy-friendliness and their ability to assure the relevant attributes of an identity, and consequently it provides a foundation and a common understanding for any other standard addressing identity, identity information, and identity management.

This document establishes the technical pillar of the Strategic Trilogy, converting the 50 INNOV innovations from CEN/TR 17011-2-1 [1] into 87 comprehensive standards while operating within the legal facilitation framework provided by CEN/TR 17011-2-3 [2].

The present document covers the assessment of VHF radiotelephone transmitters and receivers for the maritime mobile service operating in the frequency range 156 MHz to 174 MHz, and ancillary equipment in respect of ElectroMagnetic Compatibility (EMC) intended to be used in a marine environment. Technical specifications related to the antenna port and emissions from the enclosure port of marine radiotelephone transmitters and receivers are not included in the present document. Such technical specifications are found in the related product standards for the effective use of the radio spectrum. The present document specifies the applicable test conditions, performance assessment, and performance criteria for VHF radiotelephone transmitters and receivers for the maritime mobile service, and associated ancillary equipment. NOTE: The relationship between the present document and essential requirements of article 3.1b of Directive 2014/53/EU [i.2] is given in annex A.

This document:
provides guidelines for the implementation of systems for the management of identity information;
specifies requirements for the implementation and operation of a framework for identity management;
is applicable to any information system where information relating to identity is processed or stored;
is considered to be a horizontal document for the following reasons:
it applies concepts such as distinguishing the term “identity” from the term “identifier” on the implementation of systems for the management of identity information and on the requirements for the implementation and operation of a framework for identity management,
it provides an important contribution to assess identity management systems with regard to their privacy-friendliness and their ability to assure the relevant attributes of an identity, and consequently it provides a foundation and a common understanding for any other standard addressing identity, identity information, and identity management.

This document specifies the basic guidance and methods for activity measurements of solid materials to be cleared for recycling, re-use or disposal as non-radioactive waste arising from the operation and decommissioning of nuclear facilities, in order to show compliance with required limits for generic clearance or specific clearance. It does not apply to ordinary radioactive waste characterization.

This document is published as a dual logo standard and is applicable for the explosion protection requirements for the construction, testing and marking for Group I Ex Equipment that can be an individual item, or be an assembly of multiple items of Ex Equipment and Ex Components forming mining machinery. The standard atmospheric conditions (relating to the explosion characteristics of the atmosphere) under which it can be assumed that Ex Equipment can be operated are: - temperature −20 °C to +60 °C; - pressure 80 kPa (0,8 bar) to 110 kPa (1,1 bar); and - air with normal oxygen content, typically a volume fraction of 21 %. This part of ISO/IEC 80079 applies for Ex Equipment and Ex Components with Explosion Protection Levels (EPLs) Ma and Mb. This document supplements and modifies the general requirements of IEC 60079‑0. Where a requirement of this document conflicts with a requirement of IEC 60079-0, the requirement of this document takes precedence. This document can be used for guidance on underground applications where firedamp or coal dust can be present, but which are not Group I mines, for example tunnels. This second edition cancels and replaces the first edition, published in 2016. This edition constitutes a technical revision. Refer to the Foreword of the document for a complete listing of the technical changes between edition 2.0 and the previous edition of the document.

This document specifies a standardized data set for exercise recommendations to facilitate data exchange between healthcare providers and patients. This document specifically focuses on degenerative arthritis and backpain because these conditions commonly require long-term structured rehabilitation exercise exchange. This document defines the structure of exercise recommendation data for electronic exchange between healthcare providers and patients with degenerative arthritis and back pain. This document focuses on data exchange of exercise recommendations for backache and degenerative arthritis; other musculoskeletal disorders are outside the scope of this document. This document is not intended to provide a data set for symptoms of other musculoskeletal disorders, or for the patient’s pain intensity. This document does not cover medication orders, observation data measured by personal health devices, or other information that can be relevant in the context of recommendations for musculoskeletal disorders.

This document outlines: descriptions of use cases for identified application domains that benefit from additional semantic metadata support in office documents; descriptions of semantic metadata requirements from experts of identified application domains; specifications of possible technical strategies for associating domain-specific semantic metadata with office documents entities. This document applies to users of office documents, for example, publishers, librarians, archivists, data scientists and other document users, as well as office software developers and service system integrators. This document focuses on the methods of supporting various kinds of metadata, rather than on metadata itself.

Common modification to EN IEC 61851-23 Ed.2 (63680): make Annex BB "informative" instead of "normative"

This document specifies the requirements and test methods for external tooth bleaching products. These products are intended for use in the oral cavity, either by professional application (in-office tooth bleaching products) or consumer application (professional or non-professional home use of tooth bleaching products) or both. It also specifies requirements for their packaging, labelling and manufacturer’s instructions for use. This document is not applicable to tooth bleaching products: specified in ISO 11609; intended to change colour perception of natural teeth by mechanical methods (e.g. stain removal) or using restorative approaches, such as veneers or crowns; auxiliary or supplementary materials (e.g. tray materials) and instruments or devices (e.g. lights) that are used in conjunction with the bleaching products. This document does not specify biological safety aspects of tooth bleaching products. NOTE The maximum concentration of a bleaching agent for professional or non-professional use is subject to each country’s regulatory body.

This document describes a method for storing data in a PDF file that correspond to the processing steps of printed products. This method has three parts: metadata identifying processing steps; limitations on the interaction between PDF graphics objects that are part of a processing step and other PDF graphics objects; limitations on PDF graphics objects in processing steps. This method is intended to be generic, i.e. not specific to packaging and labels. In addition, this document defines the following packaging- and label-specific groups of processing steps data: data corresponding to finishing steps, such as cutting, folding or glueing; braille; information panels; indications of physical dimensions; indications of intended positions of graphical elements; printed white, for example on transparent or metallic surfaces; printed varnish; primer; printing plate making.

This document describes the use cases for IoT-based management of tangible cultural heritage assets, which builds upon the framework provided in ISO/IEC TR 30189-1:2025.

This document specifies methods for measuring rolling resistance, under controlled laboratory conditions, for new pneumatic tyres designed primarily for use on passenger cars, trucks and buses. This document is not applicable to tyres intended for temporary use only. This document also specifies a method for correlating measurement results to allow inter-laboratory comparisons.

This document specifies a method for the determination of residual monomers and other volatile organic components (unsaturated or saturated) in aqueous polymer dispersions and lattices, as well as in related products by headspace capillary-column gas chromatography (HS-GC). This document is applicable to the determination of residual monomers and other volatiles, include acrylic and methacrylic esters, butadiene, styrene vinyl acetate, as well as by-products such as ethylbenzene.

This document establishes a metric series of single-rod pneumatic short‑stroke cylinders with bores from 20 mm to 100 mm (inclusive) for use at a maximum working pressure of 1 000 kPa [10 bar1)] with and without magnetic function. They are not equipped with adjustable cushioning, so their application is restricted to those systems where adjustable cushioning is not required. 1) 1 bar = 100 kPa = 105 Pa; 1 Pa = 1 N/m2.

This document specifies a test method for assessing the fire performance of water-filled plastic pipes and fibre reinforced plastic (FRP) pipes.

This document specifies a method for the determination of nicotine content of nicotine pouches and nicotine pouch filler using HPLC/UPLC with UV spectroscopy.

This document specifies requirements for assessment of the mechanical strength of metal profiles incorporating a thermal barrier having mechanical performance depending on their intended use.
It also specifies the tests to determine the characteristic values of mechanical properties of the thermal barrier profile and to assess the effect of different conditionings of the thermal barrier on the mechanical performance of the connection.
This document does not apply to thermal barriers which do not give a contribution to the mechanical resistance of the profiles.
This document is applicable to thermal barrier profiles designed mainly for windows, doors, screens and curtain walls.
This document does not apply to thermal barriers made only of metal profiles connected with metal pins or screws.
This current edition of EN 14024 will supersede EN 14024:2004. Differences in test procedures between the two versions will not lead to significant differences in test results. Therefore, existing test results according to EN 14024:2004 are considered as equivalent to new test results according to the current edition of EN 14024.