IEC/TC 69 - IEC_TC_69

This part of IEC 61851-3 series as a technical specification together with part 3-1 and with part 1 of IEC61851, applies to communication for the conductive transfer of electric power between the supply network and a light electric road vehicle to a removable RESS or traction-battery of a light EV when connected to the supply network, with a rated supply voltage up to 480 V a.c. or up to 400 V d.c. and a rated ìoutputî voltage up to 480 V a.c. or up to 200 V d.c.. Energy management system for control of power transfer between battery systems and voltage converter units specifies the communication for all devices that may take part in energy management control. Such energy control applications may be implemented in e.g. light electric vehicles, robots, offshore parks, isolated farms, etc. This part of IEC 61851-3 series provides application objects provided by the AC-DC voltage converter unit or DC/DC voltage converter unit

This part of IEC 61851-3 series as a technical specification together with part 3-1 and with part 1 of IEC61851, applies to communication for the conductive transfer of electric power between the supply network and a light electric road vehicle to a removable RESS or traction-battery of a light EV when connected to the supply network, with a rated supply voltage up to 480 V a.c. or up to 400 V d.c. and a rated ìoutputî voltage up to 480 V a.c. or up to 200 V d.c.. Energy management system for control of power transfer between battery systems and voltage converter units specifies the communication for all devices that may take part in energy management control. Such energy control applications may be implemented in e.g. light electric vehicles, robots, offshore parks, isolated farms, etc. This part of IEC 61851-3 series specifies application objects provided by the battery system.

This part of IEC 61851-3 series (in a first step as Technical Specification for three-year period) together with part 1 of IEC 61851, applies to the equipment for the conductive transfer of electric power between the supply network and an electric road vehicle when connected to the supply network, supply voltage up to 480 V a.c. or up to 400 V d.c. and a rated output voltage up to 480 V a.c. or up to 200 V d.c..The supply systems described in the IEC 61851-3 series are primarily intended for the use by electric road vehicles of category L hereinafter referred to as light electric vehicles (light Evs). NOTE 1 Light EV includes all electrically propelled two and three wheeled vehicles of Category L1 up to Category L7 according to the definition of ECE-TRANS-WP29-78r2e and all electrically propelled or assisted cycles.Light electric road vehicles (light EVs) imply all road vehicles, including plug-in hybrid road vehicles (PHEV), that derive all or part of their energy from on-board rechargeable energy storage systems, (RESS), including traction batteries.The electrical protection of the complete light EV supply system from the connection to the supply network up to the light EV or removed RESS complies with protective separation between mains and d.c. and with galvanic separation between mains and d.c. or class III.Supplementary requirements for output voltages over 60 V d.c. are given in this document.Supplementary requirements for Class III equipment with output voltages over 15 V d.c. and over 6 V a.c. are given in this document.Requirements for bidirectional energy transfer d.c. to a.c. are under consideration and are not part of this edition. NOTE 2 This standard is not mandatory for proprietary EV supply system configurations Type B or D according to IEC 61851-3 series provided they have equivalent or higher safety levels.

This part of IEC 61851-3 series (in a first step as Technical Specification for three-year period) together with part 1 of IEC61851-3, applies to the d.c. power supply equipment (e.g. VCU) for the conductive transfer of electric power between the supply network and an light electric road vehicle when connected to the supply network , with a rated supply voltage up to 480 V a.c. or up to 400 V d.c. and a rated ìoutputî voltage up to 480 V a.c. or up to 200 V d.c. The supply systems described in the IEC 61851-3 series are primarily intended for the use by EVs of category L hereinafter referred to as light electric vehicles (light EVs). NOTE 1 Light EV includes all electrically propelled two and three wheeled vehicles of Category L1 up to Category L7 according to the definition of ECE-TRANS-WP29-78r2e and all electrically propelled or assisted cycles. The electrical protection of the complete light EV supply system from the connection to the supply network up to the light EV or removed RESS complies with protective separation and with galvanic separation between a.c. input and d.c. output or class III.

This part of IEC 61851-3 series (in a first step as Technical Specification for three-year period) together with part 1 of IEC 61851-3, applies to communication for the conductive transfer of electric power between the supply network and a light electric road vehicle or a removable RESS or traction-battery of a light electric road vehicle, with a rated supply voltage up to 480 V a.c. or up to 400 V d.c. and a rated ìoutputî voltage up to 480 V a.c. or up to 200 V d.c.. Energy management system for control of power transfer between battery systems and voltage converter units specifies the communication for all devices that may take part in energy management control. The basic application profile for energy management systems consists of the following parts: Part 3-4: General definitions for communication; Part 3-5: Pre-defined communication parameters and general application objects; Part 3-6: Voltage converter unit communication; Part 3-7: Battery system communication.

This part of IEC 61851-3 series (in a first step as Technical Specification for three-year period) together with part 1 of IEC61851-3, applies to communication for the conductive transfer of electric power between the supply network and a light electric road vehicle or a removable RESS or traction-battery of a light electric road vehicle, with a rated supply voltage up to 480 V a.c. or up to 400 V d.c. and a rated ìoutputî voltage up to 480 V a.c. or up to 200 V d.c.. Energy management system for control of power transfer between battery systems and voltage converter units specifies the communication for all devices that may take part in energy management control. Such energy control applications may be implemented in e.g. light electric vehicles, robots, offshore parks, isolated farms, etc. This part of IEC 61851-3 series provides specifications with regard to the pre-defined communication parameters and general application objects.

This Part of IEC 61980 addresses communication and activities of magnetic field wireless power transfer (MF-WPT) systems. The requirements in this document are intended to be applied for MF-WPT systems accordin to IEC 61980-3 and ISO 19363. The aspects covered in this document include: - operational and functional characteristics of the MF-WPT communication system and related activities - operational and functional characteristics of the positioning system The following aspects are under consideration for future documents: - requirements for two- and three-wheel vehicles, - requirements for MF-WPT systems supplying power to EVs in motion, and - requirements for bidirectional power transfer Note: Any internal communication at Supply device or EV device is not in the scope of this document

This part of IEC 61980 applies to the off-board supply equipment for wireless power transfer via magnetic field (MF-WPT) to electric road vehicles for purposes of supplying electric energy to the RESS (rechargeable energy storage system) and/or other on-board electrical systems. The MF-WPT system operates at standard supply voltage ratings per IEC 60038 up to 1 000 V AC and up to 1 500 V DC from the supply network. The power transfer takes place while the electric vehicle (EV) is stationary. Off-board supply equipment fulfilling the requirements in this document are intended to operate with EV devices fulfilling the requirements described in ISO 19363. The aspects covered in this document include - the characteristics and operating conditions, - the required level of electrical safety, - requirements for basic communication for safety and process matters if required by a MF111 WPT system, - requirements for positioning to assure efficient and safe MF-WPT power transfer, and - specific EMC requirements for MF-WPT systems. The following aspects are under consideration for future documents: - requirements for MF-WPT systems for two- and three-wheel vehicles, - requirements for MF-WPT systems supplying power to EVs in motion, and - requirements for bidirectional power transfer. - requirements for flush mounted primary devices - requirements for MF-WPT systems for heavy duty vehicles - requirements for MF-WPT systems with inputs greater than 11,1 kVA This standard does not apply to - safety aspects related to maintenance, and - trolley buses, rail vehicles and vehicles designed primarily for use off-road. NOTE The terms used in this document are specifically for MF-WPT.

The Standard specifies roaming use cases of information exchange between EV Charge Service Providers (CSP), Charging Station Operators (CSOs) and Clearing House platforms through roaming endpoints. The elementary use cases defined in this document of IEC 63119-2 are designed to support the user to have access to the EV supply equipment which doesn’t belong to the Home-CSP. IEC 63119 series are applicable to high-level communication involved in information exchange/interaction between different CSPs, as well as between a CSP and CSO with or without Clearing House platform through the roaming endpoint. IEC 63119 series do not specify the communication either between Charging Station (CS) and Charging Station Operator (CSO) or between EV and CS.

This part of IEC 63110, as a basis for the other parts of IEC 63110, covers the definitions, use cases and architecture for the management of electric vehicle charging and discharging infrastructures. It addresses the general requirements for the establishment of an e-mobility eco-system, therefore covering the communication flows between different e-mobility actors as well as data flows with the electric power system. This document covers the following features: - management of energy transfer (e.g., charging session), reporting, including information exchanges related to the required energy, grid usage, contractual data, and metering data; - asset management of EVSE, including controlling, monitoring, maintaining, provisioning, firmware update and configuration (profiles) of EVSE; - authentication/authorization/payment of charging and discharging sessions, including roaming, pricing, and metering information; - the provision of other e-mobility services; - cybersecurity.

IEC 63119-1:2019 establishes a basis for the other parts of IEC 63119, specifying the terms and definitions, general description of the system model, classification, information exchange and security mechanisms for roaming between EV charge service providers (CSP), charging station operators (CSOs) and clearing house platforms through roaming endpoints. It provides an overview and describes the general requirements of the EV roaming service system. IEC 63119 (all parts) is applicable to high-level communication involved in information exchange/interaction between different CSPs, as well as between a CSP and a CSO with or without a clearing house platform through the roaming endpoint. IEC 63119 (all parts) does not specify the information exchange, either between the charging station (CS) and the charging station operator (CSO), or between the EV and the CS.

IEC 61851-1:2017 applies to EV supply equipment for charging electric road vehicles, with a rated supply voltage up to 1 000 V AC or up to 1 500 V DC and a rated output voltage up to 1 000 V AC or up to 1 500 V DC. Electric road vehicles (EV) cover all road vehicles, including plug-in hybrid road vehicles (PHEV), that derive all or part of their energy from on-board rechargeable energy storage systems (RESS). The aspects covered in this standard include: - the characteristics and operating conditions of the EV supply equipment; - the specification of the connection between the EV supply equipment and the EV; - the requirements for electrical safety for the EV supply equipment. This third edition cancels and replaces the second edition published in 2010. It constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) The contents of IEC 61851-1:2010 have been re-ordered. Numbering of clauses has changed as new clauses were introduced and some contents moved for easy reading. The following lines give an insight to the new ordering in addition to the main technical changes. b) All requirements from IEC 61851-22 have been moved to this standard, as work on IEC 61851-22 has ceased. c) Any requirements that concern EMC have been removed from the text and are expected to be part of the future version of 61851-21-2. d) Clause 4 contains the original text from IEC 61851-1:2010 and all general requirements from Clause 6 of IEC 61851-1:2010. e) Clause 5 has been introduced to provide classifications for EV supply equipment. f) Previous general requirements of Clause 6 have been integrated into Clause 4. Clause 6 contains all Mode descriptions and control requirements. Specific requirements for the combined use of AC and DC on the same contacts are included. g) Clause 9 is derived from previous Clause 8. Adaptation of the description of DC accessories to allow for the DC charging modes that have only recently been proposed by industry and based on the standards IEC 61851-23, IEC 61851-24 as well as IEC 62196-1, IEC 62196-2 and IEC 62196-3. Information and tables contained in the IEC 62196 series standards have been removed from this standard. h) Clause 10 specifically concerns the requirements for adaptors, initially in Clause 6. i) Clause 11 includes new requirements for the protection of the cable. j) Specific requirements for equipment that is not covered in the IEC 62752 remain in the present document. k) Previous Clause 11 is now treated in Clauses 12 to 13. The requirements in 61851-1 cover the EV supply equipment of both mode 2 and mode 3 types, with the exception in-cable control and protection devices for mode 2 charging of electric road vehicles (IC-CPD) which are covered by IEC 62752. l) Clause 14 gives requirements on automatic reclosing of protection equipment. m) Clause 16 gives requirements for the marking of equipment and the contents of the installation and user manual. This makes specific mention of the need to maintain coherence with the standards for the fixed installation. It also contains an important text on the markings for temperature ratings. n) Annex A has been reviewed to introduce complete sequences and tests and to make the e

IEC 61851-24:2023, together with IEC 61851-23, applies to digital communication between a DC EV supply equipment and an electric road vehicle (EV) for control of conductive DC power transfer, with a rated supply voltage up to 1 000 V AC or up to 1 500 V DC and a rated output voltage up to 1 500 V DC. This document also applies to digital communication between the DC EV charging/discharging station and the EV for system A, as specified in Annex A. The EV charging mode is mode 4, according to IEC 61851-23. Annex A, Annex B, and Annex C give descriptions of digital communications for control of DC charging specific to DC EV charging systems A, B and C as defined in IEC 61851-23. This second edition cancels and replaces the first edition published in 2014. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - Annex A and Annex B have been updated in line with IEC 61851-23:2023 and relevant standards.

IEC 62840-2:2016 provides the safety requirements for a battery swap system, for the purposes of swapping swappable battery system (SBS) of electric vehicles. The battery swap system is intended to be connected to the supply network. The power supply is up to 1 000 V AC or up to 1 500 V d.c, in accordance with IEC 60038. This standard also applies to battery swap systems supplied from on-site storage systems (e.g. buffer batteries). This publication is to be read in conjunction with IEC 62840-1:2016.

IEC 61851-21-2:2018 defines the EMC requirements for any off-board components or equipment of such systems used to supply or charge electric vehicles with electric power by conductive power transfer (CPT), with a rated input voltage, according to IEC 60038:2009, up to 1 000 V AC or 1 500 V DC and an output voltage up to 1 000 V AC or 1 500 V DC. This document covers off-board charging equipment for mode 1, mode 2, mode 3 and mode 4 charging as defined in IEC 61851-1:2017. This first edition, together with IEC 61851-21-1, cancels and replaces IEC 61851-21:2001. It constitutes a technical revision. This edition includes the following significant technical changes with respect to IEC 61851‑21:2001: a) this document addresses now only EMC related tests instead of other electrical tests; b) Clauses 2 and 3 have been updated; c) the port definition, the test-setups and their corresponding limits as well as the operation modes are defined more precisely; d) Annexes A to F have been added.

NEW!IEC 62576:2018 is available as IEC 62576:2018 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition. IEC 62576:2018 describes the methods for testing electrical characteristics of electric double-layer capacitor cells (hereinafter referred to as capacitor) to be used for peak power assistance in hybrid electric vehicles. This second edition cancels and replaces the first edition published in 2009. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) information on applicability of this document has been added in Clause 1; b) the definitions of some terms in Clause 3 have been improved; c) the description of test procedures in Clause 4 has been clarified; d) information on endurance cycling test has been added (Annex E).

This document applies to the DC EV supply equipment for charging electric road vehicles with a rated supply voltage of up to 480 V AC or up to 600 V DC, with rated output voltage not exceeding 120 V DC and output currents not exceeding 100 A DC. This document provides the requirements for the DC EV supply equipment where the secondary circuit is protected from the primary circuit by electrical separation. Requirements for bi-directional power flow are not covered in this document. This document also provides the requirements for the control and the communication between DC EV supply equipment and an EV. This document also applies to DC EV supply equipment supplied from on-site storage systems. The aspects covered in this document include: - characteristics and operating conditions of the DC EV supply equipment; - specification of the connection between the DC EV supply equipment and the EV; - requirements for electrical safety for the DC EV supply equipment. Additional requirements can apply to equipment designed for specific environments or conditions, for example: - DC EV supply equipment located in hazardous areas where flammable gas or vapour and/or combustible materials, fuels or other combustible, or explosive materials are present; - DC EV supply equipment designed to be installed at an altitude of more than 2 000 m; - DC EV supply equipment intended to be used on-board ships. Requirements for electrical devices and components used in DC EV supply equipment are not included in this document and are covered by their specific product standards. This document does not apply to: - safety aspects related to maintenance; - charging of trolley buses, rail vehicles, industrial trucks and vehicles designed primarily for use off-road; - equipment on the EV; - EMC requirements for equipment on the EV while connected, which are covered in IEC 61851-21-1; - charging the RESS off-board the EV. NOTE In the following countries electrical separation can only be handled by skilled people: CH

IEC 61980-1:2020 applies to the supply device for charging electric road vehicles using wireless methods at standard supply voltages per IEC 60038 up to 1 000 V AC and up to 1 500 V DC. Electric road vehicles (EV) covers road vehicles, including plug-in hybrid road vehicles (PHEV) that derive all or part of their energy from on-board rechargeable energy storage systems (RESS). This document also applies to wireless power transfer (WPT) equipment supplied from on-site storage systems (e.g. buffer batteries). The aspects covered in this document include • the characteristics and operating conditions of a supply device, • the specification for required level of electrical safety of a supply device, • communication between EV device and vehicle to enable and control WPT, • efficiency, alignment and other activities to enable WPT, and • specific EMC requirements for a supply device. The following aspects are under consideration for future documents: • requirements for MF-WPT systems supplying power to EVs in motion; • requirements for bidirectional power transfer. This document does not apply to: • safety aspects related to maintenance, • WPT system for trolley buses, rail vehicles and vehicles designed primarily for use off‑road, and • any safety or EMC requirements for the vehicle side. IEC 61980-1:2020 cancels and replaces the first edition published in 2015. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) the contents of IEC 61980-1:2015 have been re-organized so that this document is generally applicable to any WPT technologies; b) technology specific requirements, mostly for MF-WPT in the main text of IEC 61980-1:2015, have been transferred to IEC 61980-2 and IEC 61980-3; c) Annex A, Annex B and Annex C have been removed and contents of these annexes have been transferred to the relevant technology specific parts of the IEC 61980 series; d) duplications and overlaps of the requirements within IEC 61980-1:2015 have been resolved; e) terms and definitions which are specified in IEC 61851-1:2017 and are applicable for WPT system have been directly described in this document, with modification for some terms. The reference to IEC 61851-1 is withdrawn.

IEC 61851-21-1:2017(E), together with IEC 61851-1:2010, gives requirements for conductive connection of an electric vehicle (EV) to an AC or DC supply. It applies only to on-board charging units either tested on the complete vehicle or tested on the charging system component level (ESA - electronic sub assembly). This document covers the electromagnetic compatibility (EMC) requirements for electrically propelled vehicles in any charging mode while connected to the mains supply. This first edition, together with IEC 61851-21-2, cancels and replaces IEC 61851-21:2001. It constitutes a technical revision. This edition includes the following significant technical changes with respect to IEC 61851‑21:2001: a) this document addresses now only EMC tests instead of other electrical tests; b) test setups are defined more precisely; c) Annex A "Artificial networks, asymmetric artificial networks and integration of charging stations into the test setup" was added.

This Part of IEC 61980, (in a first step as Technical Specification for three-year period) applies to communication between electric road vehicle (EV) and wireless power transfer (WPT) systems when connected to the supply network, at standard supply voltages per IEC 60038 up to 1000V a.c. and up to 1500 V d.c..This standard also applies to Wireless Power Transfer (WPT) equipment supplied from on-site storage systems (e.g. buffer batteries etc.) at standard supply voltages per IEC 60038 up to 1000V a.c. and up to 1500 V d.c..

This part of IEC 61980 series, (in a first step as Technical Specification for three-year period) applies to the equipment for the magnetic field-wireless power transfer (MF-WPT) of electric power from the supply network to electric road vehicles for purposes of supplying electric energy to the RESS (Rechargeable energy storage system) and/or other on-board electrical systems in an operational state when connected to the supply network, at standard supply voltages ratings per IEC 60038 up to 1000V a.c. and up to 1500 V d.c.This standard also applies to MF-WPT equipment supplied from on-site storage systems (e.g. buffer batteries etc.) at standard supply voltages ratings per IEC 60038 up to 1000V a.c. and up to 1500 V d.c.

IEC 61851-23:2014, together with IEC 61851-1:2010, gives the requirements for d.c. electric vehicle (EV) charging stations, herein also referred to as 'DC charger', for conductive connection to the vehicle, with an a.c. or d.c. input voltage up to 1 000 V a.c. and up to 1 500 V d.c. according to IEC 60038. It provides the general requirements for the control communication between a d.c. EV charging station and an EV. The requirements for digital communication between d.c. EV charging station and electric vehicle for control of d.c. charging are defined in IEC 61851-24.

IEC 61851-24:2014, together with IEC 61851-23, applies to digital communication between a d.c. EV charging station and an electric road vehicle (EV) for control of d.c. charging, with an a.c. or d.c. input voltage up to 1 000 V a.c. and up to 1 500 V d.c. for the conductive charging procedure. The EV charging mode is mode 4, according to IEC 61851-23. Annexes A, B, and C give descriptions of digital communications for control of d.c. charging specific to d.c. EV charging systems A, B and C as defined in Part 23.

IEC 61851-1:2010 applies to on-board and off-board equipment for charging electric road vehicles at standard a.c. supply voltages (as per IEC 60038) up to 1 000 V and at d.c. voltages up to 1 500 V, and for providing electrical power for any additional services on the vehicle if required when connected to the supply network. It includes characteristics and operating conditions of the supply device and the connection to the vehicle; operators and third party electrical safety, and the characteristics to be complied with by the vehicle with respect to the a.c./d.c. EVSE, only when the EV is earthed. This second edition cancels and replaces the first edition published in 2001. It constitutes a technical revision. The main changes with respect to the first edition of this standard are: - revision of connector definitions and current levels (Clause 8); - modification definition of pilot wire to pilot function; - division of Clause 9 to create Clauses 9 and 11; - Clause 9: specific requirements for inlet, plug and socket-outlet; - Clause 11: EVSE requirements: the basic generic requirements for charging stations; - renumbering of annexes; - deletion of previous Annex A and integration of charging cable requirements into new Clause 10; - Annex B becomes Annex A and is normative for all systems using a PWM pilot function with a pilot wire; Annex C becomes Annex B; - replacement of previous Annex D (coding tables for power indicator) with B.4 in Annex B using new values; - new informative Annex C describing an alternative pilot function system.

IEC 62576:2009 describes the methods for testing electrical characteristics of electric double-layer capacitor cells (hereinafter referred to as capacitor) to be used for peak power assistance in hybrid electric vehicles.

This Technical Specification, together with EN 61851-1, gives the requirements for d.c. electric vehicle charging stations for conductive connection to the vehicle, with an a.c. supply voltage per IEC 60038, up to 690 V. This Technical Specification does not cover all safety aspects related to maintenance. This Technical Specification is not applicable to dedicated off-board charger.

This Technical Specification applies to the communication data link between external charger and electric road vehicle for the charging procedure, using the most common communication link. This Part 2 applies to communication data link between the off-board charging system with direct current and electric road vehicles. The aspects covered are the physical layer, the data link layer and the communication applicative layer. This Technical Specification does not cover communication between dedicated off-board charger and their electric vehicle. Annex A gives an example of normal operation.

CENELEC Report * D122/065: Withdrawn

Applies to equipment for charging electric road vehicles at standard a.c.supply voltages (as per EN 60038) up to 690 V and at d.c. voltages up to 1 000 V, and for providing electrical power for any additional services on the vehicle if required when connected to the supply network.

This part of EN 61851, together with part 1, gives the requirements for a.c. electric vehicle charging stations for conductive connection to an electric vehicle, with a.c. supply voltages according to EN 60038 up to 690 V.

This part of EN 61851 together with part 1 gives the electric vehicle requirements for conductive connection to an a.c. or d.c. supply, for a.c. voltages according to EN 60038 up to 690 V and for d.c. voltages up to 1 000 V, when the electric vehicle is connected to the supply network.

Withdrawn by CLC/TS 50457-1:2008 (PR=16661) and CLC/TS 50457-2:2008 (PR=16662)

Converted into CLC/TS 50457-1:2008 (PR=16661)

Converted into CLC/TS 50457-2:2008 (PR=16662)

Withdrawn by CLC/TS 50457-1:2008 (PR=16661) and CLC/TS 50457-2:2008 (PR=16662)

Withdrawn by CLC/TS 50457-1:2008 (PR=16661) and CLC/TS 50457-2:2008 (PR=16662) (2007-03-01)