Search Catalog

This document specifies certain characteristics of the essential oil of clary sage (Salvia sclarea L.) “prewilted” French type and “chopped” French type with a view to facilitating the assessment of its quality.

This document specifies the default (implicit) tolerances for indication in the ISO 10110 series, which standardizes drawing indications for optical elements and systems.

This document defines terms for levels of automation and autonomy (LAA), thereby establishing the taxonomy describing the levels of automation and autonomy (LAA). This document does not provide specifications or requirements on automated operating systems defined herein. This document applies to earth-moving machinery (EMM) as defined in ISO 6165[1].

This document specifies the tolerances on form and dimensions of the following: — wrought aluminium and aluminium alloy extruded round tubes, having diameters from 13 mm up to 450 mm. — wrought aluminium and aluminium alloy extruded square, rectangular and hexagonal tubes, having circumscribing circle up to 350 mm in diameter. This document is applicable to extruded round, square, rectangular and hexagonal tubes. Four-digit numerical designations are in line with the Registration of International Alloy Designations and Chemical Composition Limits for Wrought Aluminum and Wrought Aluminum Alloys (known as "Teal sheets").[1]

This document specifies the shape, dimensions, material, performance requirements and labelling for the type of closure for infusion bottles, as described in ISO 8536-1, that is used in connection with the freeze-drying (or lyophilization) of drugs and biological materials. The dimensional requirements are not applicable to barrier-coated closures. Closures specified in this document are intended for single use only. NOTE The potency, purity, stability and safety of a medicinal product during its manufacture and storage can be strongly affected by the nature and performance of the primary packaging.

This document specifies the qualitative detection of nitrates in pyrotechnic compositions of fireworks.

This document specifies the procedure and requirements for examination of the mixing efficiency of batch-type and continuous-type concrete mixers as defined in ISO 18650-1. It is applicable to concrete mixers having a rated capacity greater than or equal to 0,5 m3.

This document defines terms related to the ignition systems of spark-ignited internal combustion, mainly but not solely intended for use in road vehicles.

This document describes a role model for predictive safety risk information provisioning primarily applicable for non-enforcement applications, and potentially applicable for enforcement application services are out of scope of this document. This role model is dedicated to human centric road transport safety management purposes considering all road users on the roads. It can be applicable to enforcement application services.

This document specifies the test method for determination of particle size of ion exchange resin by laser diffraction, ranging from 0,1 μm to 2,0 mm.

This document specifies the qualitative detection of perchlorates in pyrotechnical compositions of fireworks.

This document describes the modifications to the symbol quality methodology defined in ISO/IEC 15415 and provides a symbology specification. This document establishes alternative illumination conditions, some new terms and parameters, modifications to the measurement and subsequent grading of certain parameters, and the reporting of the grading results. This document is intended for verifier manufacturers and application specification developers.

The scope of this document encompasses design parameters of external visual communication used by single mode L4/L5 automated driving system-dedicated vehicles (ADS-DVs), as defined in SAE J3016. Guidance is given for passenger cars (including sport utility vehicles and light trucks) and commercial vehicles (including heavy trucks and buses), as well as derivatives of them that carry or do not carry compartments for occupants (i.e. driver or passengers). These vehicles can be operated in different domains, covering several alternative scenarios and use cases (e.g. open roads, motorways, urban environments, confined areas, geo-fenced areas with dedicated lanes, ports, terminals, pits). It is assumed that the design of ADS-DVs will be unique, thus making it readily apparent that the vehicle is an ADS-DV (see also Annex A for descriptions of use cases concerning the need for communication). The wide range of domains makes it important to consider users with different experiences and abilities, e.g. experienced and inexperienced drivers, elderly, people with disabilities and children.

This document specifies methods for the determination of volumetric swelling of wood.

This document provides a uniform reference for tertiary structure items when a tertiary structure is designed and constructed in offshore oil and gas projects. This document covers topside systems for fixed or floating offshore projects not covered by class requirements. This document can be applicable for hull systems and onshore projects when there is consent from relevant stakeholders. This document does not provide class rules from classification societies. This document provides requirements on dimensions of the items but does not include requirements on clearances with other structures. The following tertiary outfitting designs for equipment items are covered in this document: — handrails; — safety gate; — stairs; — spiral stairs; — vertical ladder; — grating; — access hole (manhole); — connection method.

This document describes the relationship between an inertial measurement system and a chord measurement system applying the chord-based method with different chord length and chord division. This document is applicable to 1 435 mm and wider track gauges. This document does not apply to urban/light rail systems, tramways and any track gauge narrower than 1 435 mm.

This document provides requirements on the classification, designation, inspection, testing method, marking, packaging, transportation, storage, installation and maintenance of slewing bearings for marine cranes. This document is applicable to the design, manufacture and acceptance of slewing bearings for marine cranes at an ambient temperature not lower than −40 °C.

This document specifies the requirements for the dimensions, material and manufacture of a steel block for setting, checking and verification of ultrasonic test equipment used in manual testing.

This document describes a framework for the use of IoT technology for management of tangible cultural heritage assets, which includes the associated functional entities and information flows.

This document specifies a method for determination of the mechanical durability of pellets. The mechanical durability is a measure of the resistance of compressed fuels towards shocks and/or abrasion as a consequence of handling and transportation.

This document specifies high efficiency video coding.

IEC 61800-9-2:2023 specifies energy efficiency indicators of power electronics (complete drive modules (CDM), input or output sub drive modules (SDM), power drive systems (PDS) and motor starters, all used for motor driven equipment. This document is a group energy efficiency publication according to IEC Guide 119 and specifies the methodology for the determination of losses of the complete drive module (CDM), the sub drive module (SDM), the power drive system (PDS) and the motor system. It defines IE and IES classes, their limit values and provides test procedures for the classification of the overall losses of the motor system. Furthermore, this document proposes a methodology for the implementation of the best energy efficiency solution of drive systems. This depends on the architecture of the motor driven system, on the speed/torque profile and on the operating points over time of the driven load equipment. It provides a link for the energy efficiency evaluation and classification of the extended product. This edition includes the following significant technical changes with respect to the previous edition: a) Additional IES Classes defined to IES5; b) Removed reference motor loss data and now point to IEC 60034-30-2; c) Expanded and modified factors in Clause 6 for CDMs; d) Annex C is now the Mathematical Model for CDM Losses; e) Moved the mathematical model for the CDM to Annex C; f) Added Sub Drive Input Module and Sub Drive Output Modules to Annex B; g) Annex D is now the Converter Topology (old Annex C); h) Annex E is now the Interpolation of Motor Losses (Old Annex D); i) Annex E expanded to include various motor connections and updated interpolation method; j) New Annex E for determination of Interpolation Coefficients; k) Annex F is the old Annex E; l) New Annex J Explanation of Correction Factors for the Reference Losses in Table 8.

This document specifies requirements for the design and tests of pneumatic driven quick-closing valves, used in ship fuel and lubricating oil systems to stop the fluid flow in the event of a leak. This document is applicable to valves of nominal diameter (DN): 15, 20, 25, 32, 40, 50, 65, 80, 100, 125, 150, 200, 250, and 300, corresponding to nominal pipe sizes (NPS): 1/2, 3/4, 1, 1 1/4, 1 1/2, 2, 2 1/2, 3, 4, 5, 6, 8, 10, and 12. NOTE This document is mainly intended for use by producers. Onboard ship inspection and maintenance after the delivery and installation of the valve can help ensure continued proper performance.

IEC 63522-48:2024 is used for for testing electromechanical elementary relays (electromechanical relays, reed relays, reed contacts, reed switches and technology combinations of these) and for evaluating their ability to perform under expected conditions of transportation, storage and all aspects of operational use.
This document defines a standard test method for contact failure rate test of electromechanical elementary relays applied to low-load applications (e.g., CC 0, CC 1) and failure rates and failure rate levels at low loads under specified conditions.

IEC 63522-13:2024 is used for testing electromechanical elementary relays (electromechanical relays, reed relays, reed contacts, reed switches and technology combinations of these) and for evaluating their ability to perform under expected conditions of transportation, storage and all aspects of operational use.
This document defines a standard test method to simulate impacts of sulfuric atmospheres to relays. The test conditions simulate an artificial situation and allow a performance comparison for usability of the devices under test (DUT) with regard to known and existing switching solutions.
The test is a static test without actual operation of the DUT to simulate a worst-case scenario for corrosion, since corrosion increases over time. The corrosion layer can potentially create contact sticking, increase resistance or other undesired effects in the relay. Those aspects can be affected by DUT actuations during the test, which can destroy the corrosion layers or hide relevant long-term effects.
In addition to polluted atmospheres, the suitability of the DUT for use and/or storage in corrosive atmospheres can be assessed in a salt-laden atmosphere as described in IEC 63522-44.

IEC 63522-15:2024 is used for testing electromechanical elementary relays (electromechanical relays, reed relays, reed contacts, reed switches and technology combination of these) and evaluates their ability to perform under expected conditions of transportation, storage and all aspects of operational use.
This document defines a standard test method that applies defined loads to relay terminals (direct axial pulls, bending or twisting) as they can be present in assembled configurations or during handling. In addition, it covers torque stress for nuts and threaded terminals as they are likely to be experienced during normal assembly operations.

IEC 63522-17:2024 is used for testing electromechanical elementary relays (electromechanical relays, reed relays, reed contacts, reed switches and technology combination of these) and for evaluating their ability to perform under expected conditions of transportation, storage and all aspects of operational use.
This document defines a standard test method to simulate the mechanical stress on relays as it can occur in service, during handling or during transportation. This document comprises test procedures to simulate shock impacts, steady acceleration environments (such as moving vehicles, aircraft and projectiles) as well as vibration conditions.

1.1 This document specifies the safety requirements and measures for — cold presses, — hot presses, — bending presses, — edge/face gluing presses, — membrane presses, and — embossing presses, where the pressing force is applied by hydraulic, pneumatic or electrical actuators pushing two flat or shaped surfaces against each other, capable of continuous production use, altogether referred to as “machines”. This document deals with all significant hazards, hazardous situations and events as listed in Annex A, relevant to machines, when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer, including reasonably foreseeable misuse. Also, transport, assembly, dismantling, disabling and scrapping phases are taken into account. 1.2 This document is applicable to machines fitted with one or more of the following devices or additional working units, whose hazards have been dealt with: a) a device for hot gluing; b) a device for high-frequency gluing in the frequency range from 1 MHz to 400 MHz; c) a device for high-frequency shaping in the frequency range from 1 MHz to 400 MHz; d) an automatic workpiece loading and unloading system; e) an intermediate additional platen; f) a workpiece extractor; g) a horizontal pressing system; h) split moveable platens. 1.3 The machines are designed to process workpieces consisting of: a) solid wood; b) materials with similar characteristics to wood (see ISO 19085-1:2021, 3.2), except those with light alloy laminates/edges/profiles for high-frequency presses; c) wood-based material such as chipboard, fibreboard and plywood composed/laminated with steel sheets/edges/profiles, except for high-frequency presses; d) honeycomb board; e) composite boards made from the materials listed above. 1.4 This document does not deal with any hazards related to: — specific devices that differ from the list above; — hot fluid heating systems internal to the machine other than electrical; — any hot fluid heating systems external to the machine; — operation of taking intermediate platens out and in again; — the combination of a single machine being used with any other machine (as part of a line). 1.5 This document is not applicable to: — frame presses; — membrane presses where the pressing force is applied by vacuum only; — presses for producing chipboard, fibreboard, OSB; — machines intended for use in potentially explosive atmosphere; — machines manufactured before the date of publication of this document.

IEC 63522-11:2025 is used for testing electrical relay enclosures along with the appropriate severities and conditions for measurements and tests designed to assess the ability of DUTs to perform under expected conditions of transportation, storage and all aspects of operational use. This document defines standard test methods for appropriate enclosure sealing testing.

IEC 63522-14:2025 is used for testing along with the appropriate severities and conditions for measurements and tests designed to assess the ability of DUTs to perform under expected conditions of transportation, storage and all aspects of operational use. This document defines a test for determining the extent to which electrical relays support mould growth and how any mould growth can affect the performance and other relevant properties/functions of a relay.

IEC 63522-12:2025 Used for testing electromechanical elementary relays (electromechanical relays, reed relays, reed contacts, reed switches and technology combination of these) and evaluates their ability to perform under expected conditions of transportation, storage, and all aspects of operational use. This document defines a standard test method to provoke internal moisture inside relays by different methods. The device under test (DUT) is tested at its specified energization values throughout the defined temperature range. The test methods in this document are applicable to RT III, RT IV and RT V products only, i.e., wash-tight, sealed, and hermetically sealed DUTs.

IEC 60704-2-4:2025 applies to single unit electrical washing machines and the washing and spinning function of combined appliances for household and similar use and to spin extractors for household and similar use. For washer-dryers, see IEC 60704-2-16:2019. Requirements for the declaration of noise emission values are not within the scope of this standard. For determining and verifying noise emission values declared in product specifications, see IEC 60704-3:2019. This fourth edition cancels and replaces the third edition published in 2011. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) alignment to IEC 60704-1:2021; b) alignment to Edition 6 of IEC 60456:2024, especially regarding test programme and detergent; c) considering multi-compartment washing machines; d) considering wall-mounted washing machines; e) definition of the drum speed measurement; f) adapting parts for standard test load and test programme. This document is intended to be used in conjunction with the fourth edition of IEC 60704-1:2021.

This document specifies the test method for evaluating possible chemical interactions between enclosures and photographic materials that are produced in a light sensitive silver halide and gelatin containing layer, processed using wet chemistry and where the final image retains metallic silver, herein referred to as silver-gelatin materials. Modified versions of the test method are applicable to chromogenic (dye coupler) and diazo photographic materials (see Annex A). This document is applicable to all general photographic enclosure materials used for storage, display, and transport, such as paper, tissue, cardboard, mat board and plastics. It is also applicable to components of photographic enclosure materials such as adhesives and marking substances, including inks, paints, labels, and tape. This document applies to all storage, display, and transport materials used for silver-gelatin photographs whether intended for short or long-term use (see Annex E). This document does not apply to non-silver-gelatin imaging systems. It does not pertain to harmful physical interactions such as blocking (sticking together), dye bleed, adhesive migration, or plasticizer exudation. It does not pertain to important criteria of enclosures such as their inherent chemical stability, physical integrity, and workmanship. Passing the photographic activity test (PAT) alone does not indicate that a material is archival. Quality requirements for photo-safe storage enclosures and their components are covered in ISO 18902, which includes passing the criteria of the PAT.

This document specifies the characteristics of laminate floor coverings, supplied in modular format e.g. tiles, planks. It also specifies requirements for marking and packaging. Additional operational properties are given in Annex A.

This document specifies the management principles and procedures implemented at the execution stage under the framework of life cycle management specified by ISO 22040.

This document specifies a test method for determination of the fracture resistance of monolithic ceramics at room temperature using the indentation fracture (IF) method. This document is applicable to dense monolithic ceramics and whisker- or particulate-reinforced ceramics which are regarded as macroscopically homogeneous. This document is not applicable to monolithic silicon nitride ceramics for bearing balls and continuous-fibre-reinforced ceramics composites. This document is applicable for material development, material comparison, quality assurance, characterization and reliability data generation. Indentation fracture resistance, KI,IFR, as defined in this document is not to be equated with fracture toughness determined using other test methods such as KIsc and KIpb. NOTE KI,IFR is an estimate of a material’s resistance to cracking as introduced by an indenter and has correlations with wear resistance and rolling contact fatigue performance as well as machining processes, since these properties are governed by the resistance to crack extension in localized damage areas.[1]-[3] By contrast, fracture toughness properties KIsc and KIpb are intrinsic properties of a material and are relevant to macroscopic and catastrophic fracture events with long cracks rather than those phenomena caused by microscopic and successive damage accumulation associated with short cracks.

This document specifies normative references, terms and definitions, rating requirements, published rating, tolerance and marking provisions of positive displacement refrigerant compressors. This document applies to positive displacement refrigerant compressors and their performance in air-conditioning, heating, refrigeration and dehumidification applications. Single stage, two-stage and refrigerant-injected compressors without intermediate temperature load (only one evaporator) are included in this document. Subcritical operation and transcritical operation are also included in this document. Compressors for other applications, compression types and operations can also refer to this document. The manufacturer is solely responsible for the determination of values to be used in the published product information. This document is intended as guidance for the industry, including manufacturers, engineers, installers and service contractors. It defines the minimum amount of information in a standard form to enable the evaluation and comparison of different compressors for use in an application.

This document specifies a test method for the determination of the residual stress of the TGO layer in thermal barrier coating (TBC) by photoexcitation fluorescence piezoelectric spectroscopy. This test method specifies that there is a Cr element in the bond coat of the TBC. This test method to determine the residual stress in the TGO layer of the TBC system is not limited by the preparation method of the TBCs. Particularly, the TBC system prepared by electron beam-physical vapour deposition (EB-PVD) has a better effect. This method provides guidance on determining reliable estimates of residual stresses from fluorescence spectral data and estimating uncertainties in the results.

This document specifies the components, interface, technical requirements and test methods of the suction tube position monitor (STPM). It is applicable only to the installed components, functions or systems. This document covers the design, manufacture and modifications of the suction tube position monitor.

This document specifies a method for determining the puncture resistance of board using a pendulum device. This document is applicable to all types of board, including corrugated fibreboard and solid board, especially those used in the manufacture of packaging cases.

This document specifies requirements and test methods for straight lengths of factory made thermally insulated bonded twin pipe assemblies for directly buried hot water networks in accordance with EN 13941-1, comprising two steel service pipes, polyurethane (PUR) foam thermal insulation and a casing of polyethylene.
The twin pipe assembly can also include the following additional elements: Measuring wires, spacers and diffusion barriers.

ISO 17633:2017 specifies requirements for classification of tubular flux and metal cored electrodes and rods, based on the all-weld metal chemical composition, the type of core, shielding gas, welding position and the all-weld metal mechanical properties, in the as-welded or heat-treated conditions, for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels.
ISO 17633:2017 is a combined standard providing for classification utilizing a system based upon nominal composition or utilizing a system based upon alloy type.
a) Clauses, subclauses, and tables which carry the suffix letter "A" are applicable only to products classified using the system based upon nominal composition.
b) Clauses, subclauses, and tables which carry the suffix letter "B" are applicable only to products classified using the system based upon alloy type.
c) Clauses, subclauses, and tables which do not have either the suffix letter "A" or the suffix letter "B" are applicable to all products classified in accordance with this document.
ISO 17633:2017 does not use pulsed current for determining the product classification.

This document specifies requirements and test methods for fitting and steel valve assemblies of factory made thermally insulated bonded twin pipe assemblies for hot water networks in accordance with EN 13941-1, comprising two steel service pipes, in most cases steel fittings and/or steel valves, steel components, polyurethane (PUR) foam thermal insulation and one casing of polyethylene.
NOTE   Steel components can be e.g. fixing bars.
The twin pipe assembly can also include the following additional elements: measuring wires, spacers and diffusion barriers.
This document covers the following assemblies:
-   fittings: bends, T-pieces and reducers;
-   valves for main line.
This document applies to fitting assemblies with an internal pressure of at least 1,6 MPa and steel valve assemblies with a maximum internal pressure of 2,5 MPa.

This document specifies requirements for factory made thermally insulated bonded steel service valve assemblies for filling, draining, venting and operation purposes for directly buried hot and cold water networks in accordance with EN 13941-1, comprising a steel service valve, steel service pipe, polyurethane (PUR) foam thermal insulation and a casing of polyethylene (PE).
This document applies of steel service valve assemblies with an internal pressure of maximum 2,5 MPa.
The principles of this document can be applied to thermal insulated bonded steel service valve assemblies with internal pressures higher than 2,5 MPa, provided that special attention is paid to the effects of pressure.
The steel service valve assembly can also include the following additional elements: measuring wires, spacers, and diffusion barriers.

This document specifies a method to quantify and identify air concentration (number of particles/cm3) of particles of either carbon black or amorphous silica, or both, by size in air samples collected in a mixed dust, industrial, manufacturing environment. This method is applicable to air samples collected with an electrical low pressure cascade impactor (ELPCI) for sampling in manufacturing environments where there are a variety of particle types contributing to the overall atmosphere. This method is applicable only to environments with chemically and physically distinct particles contributing to aerosols or where confounders can be controlled (e.g. diesel sources).