Search Catalog

This document establishes a method for estimation by sensory analysis of the cooking quality of alimentary pasta. Estimation takes place through the evaluation of the following:
— firmness, by chewing;
— liveliness, by manual handling;
— starch release, by manual handling.
This document does not express a preference and only gives an estimate relating to the evaluation of the cooking of the pasta. It does not apply to small pasta shapes usually consumed in soups.
This document is applicable to all forms of alimentary pasta produced from durum wheat and to products made from common wheat or a mixture of common wheat and durum wheat.
NOTE National regulations can apply.
This document has been specifically designed to establish the reference method with a view to the development, approval or monitoring of instrumental or practical methods of sensory analysis.

This document specifies general principles for the development and evaluation of the machine performance level achieved (MPLa) of safety-control systems (SCS) using components powered by all energy sources (e.g. electrical, hydraulic, mechanical) used in earth-moving machinery and its equipment, as defined in ISO 6165:2022. The principles of this document apply to machine control systems (MCS) that control machine motion or mitigate a hazard; such systems are assessed for machine performance level required (MPLr) per ISO 19014-1:20261) or ISO 19014-5:2026.2) NOTE 1 Requirements for the application of functional safety throughout the software development lifecycle are addressed in ISO 19014-4:2026.3) To cover all the relevant safety requirements for the products in its scope, this document is used in combination with ISO 19014-1:2026, ISO 19014-3:2026, ISO 19014-4:2026, and ISO 19014-5:2026. This document does not apply to the following systems: awareness systems that do not impact machine motion (e.g. cameras and radar detectors); fire suppression systems, unless the activation of the system interferes with, or activates, another SCS. This document does not apply to other systems or components where the operator would be aware of failure (e.g. windscreen wipers, head lights), or are primarily used to protect property. NOTE 2 Audible warnings are excluded from the requirements of diagnostic coverage. This document addresses the significant hazards, as defined in ISO 12100:2010, mitigated by the hardware components within the SCS. This document is not applicable to earth-moving machinery manufactured before the date of its publication.

This document specifies a methodology for the determination of performance levels required for earth-moving machinery as defined in ISO 6165:2022. NOTE 1 For controls determined to be safety-related, the characteristics for architecture, hardware, software, environmental requirements, and performance are covered by other parts in the ISO 19014 series. NOTE 2 The ISO 19014 series covers the significant hazards caused by the failure of a safety control system and excludes hazards arising from the equipment itself (for example, electric shock or fire). To cover all the relevant safety requirements for the products in its scope, this document is used in combination with ISO 19014-2:2026, ISO 19014-3:2026, ISO 19014-4:2026, and ISO 19014-5:2026. This document does not apply to other controls that are not safety control systems (SCS) and that do not mitigate a hazard or perform a control function, and where the operator would be aware of a failure (e.g. windscreen wipers, head lights, cab light). NOTE 3 A list of safety control systems is included in Annex B. NOTE 4 Audible warnings are excluded from the requirements of diagnostic coverage. This document is not applicable to earth-moving machinery manufactured before the date of its publication.

This document establishes the requirements for technical reviews and audits to be performed throughout the acquisition life cycle for the US Department of Defense (DoD) and other defense agencies. This document provides the definition, description, and intent, as well as the entry, exit and success criteria, for each technical review and audit. It is to be used to establish agreement between acquirers and suppliers on the technical reviews and audits that are needed for the project, as well as the focus and expectations of each technical review and audit.

This document specifies a laboratory test method for the determination of the aerobic biodegradability of textile materials in seawater by measuring the biochemical oxygen demand (BOD) or the amount of evolved carbon dioxide. This method involves a test under an aerobic condition, which is intended to replicate the sea surface area conditions. It applies to textile materials, such as staple fibres, tops, yarns and fabrics. This test method is not intended for evaluating anaerobic biodegradation of textile materials, as simulating deep sea environments is out of the scope of this document.

This document provides telehealth cybersecurity controls of the overall security framework for systems and services applied to telehealth, specifically addressing cybersecurity controls uniquely applicable to telehealth, while general elements relevant to health delivery organizations (HDOs) can be referenced from ISO 27799. It also includes Annex A, which, for informative purposes, provides a mapping of the controls in 4.2 to 4.5 of this document to the security controls in ISO 27799:2025.

This document specifies the physical, mechanical, packaging and labelling requirements for curing polymerizing radio-opaque and non-radio-opaque resin cements based on poly (methacrylic acid esters). This document applies to two types of cement, intended respectively for use with a syringe or in the dough state, for the fixation of internal orthopaedic prostheses and supplied as units containing premeasured amounts of sterile powder and of sterile liquid in forms suitable for mixing at the time of implantation. All requirements in this document apply to, and all test methods are intended to be performed on, a sterile product. The requirements in this document are not intended to apply to acrylic resin cements for other applications, such as stabilization of spinal fractures, fixation of bone screws, bone anchors or augments, etc., although the test methods described can be applicable. This document does not cover the hazards associated with the use of the cement in respect of either the patient or the user of the cement.

This document gives guidance on methods of specification to be used to describe green coffee for sale and purchase.
It also gives guidance on procedures for sampling, packing, marking, storage and shipping of green coffee.
This document is applicable to green coffee as defined in ISO 3509.

This document specifies machine performance levels required (MPLr) by common function and type for earth-moving machinery as defined in ISO 6165:2022. These MPLr can then be mapped or applied to safety control systems (SCS) used to control or that affect the functions defined in Tables A.1 to AA.1. To cover all the relevant safety requirements for the products in its scope, this document is used in combination with ISO 19014-1:2026, ISO 19014-2:2026, ISO 19014-3:2026, and ISO 19014-4:2026. This document is not applicable to earth-moving machinery manufactured before the date of its publication.

This document specifies the minimum requirements for environmental testing of electronic and electrical components identified as safety-related parts of the control system (SRP/CS) used on earth-moving machinery as defined in ISO 6165:2022. To cover all the relevant safety requirements for the products in its scope, this document is used in combination with ISO 19014-1:2026, ISO 19014-2:2026, ISO 19014-4:2026, and ISO 19014-5:2026. This document does not address explosion proofing. NOTE National or regional requirements can apply. For information about explosion proofing, see the IEC 60079 series.

This document specifies general principles for software development and signal transmission requirements of safety-related parts of machine-control systems (MCS) in earth-moving machinery and its equipment, as defined in ISO 6165:2022. In addition, this document addresses the significant hazards as defined in ISO 12100:2010 related to the software embedded within the MCS. The significant hazards being addressed include incorrect machine control system output responses from machine control system inputs. To cover all the relevant safety requirements for the products in its scope, this document is used in combination with ISO 19014-1:2026, ISO 19014-2:2026, ISO 19014-3:2026, and ISO 19014-5:2026. Cybersecurity is out of the scope of this document. NOTE For guidance on cybersecurity, see an appropriate security standard. This document is not applicable to earth-moving machinery manufactured before the date of its publication.

This document specifies a rapid method for the determination of the oil and water contents in oilseeds using pulsed nuclear magnetic resonance (NMR).
It is applicable to rapeseeds, linseeds and sunflower seeds with a water content less than 10 % and soya beans with a water content less than 14 %. For seeds with higher water contents, drying is necessary before the water and oil content can be determined by pulsed NMR.
NOTE 1        This method has been tested with rapeseeds, soya beans, linseeds and sunflower seeds. This does not, however, preclude its applicability to other commercial seeds whose oil is liquid at the temperature of measurement.
NOTE 2        The reproducibility values obtained are generally higher than those obtained by the reference methods (see ISO 659 and ISO 665) because they depend on the variability between the instruments and on that existing between the calibrations, which depends on the measurement accuracy of the reference methods.
NOTE 3        The results of the comparison test between different magnets and different volumes of seed samples (see Annex B) are in coherence with the results of the interlaboratory test (see Annex A).

This document specifies a method for the determination of the loss in mass at 105 °C of green coffee.
This document is applicable to decaffeinated and non-decaffeinated green coffee as defined in ISO 3509.
This method of determining the loss in mass can be considered, by convention, as a method for determining the water content and can be used as such by agreement between the interested parties. This method serves as a reference method for calibrating methods of determining the water content.

This document specifies a spectrometric method for the determination of the chlorophyll content of rapeseed. It is not applicable to the determination of chlorophyll in oils.

This document presents information on a volumetric practice used to estimate ethanol and hydrocarbon content in blends of fuel ethanol and gasoline. This practice is based on phase separation induced by a sodium chloride (NaCl) solution, allowing approximate observation of hydrocarbon fraction and aqueous fraction. The approaches described in this document are intended for informational purposes only.

The present document specifies the general aspects of HI2, HI3, and HI4 interfaces for handover via IP based networks. The present document:
• specifies the modular approach used for specifying IP based handover interfaces;
• specifies the header(s) to be added to IRI, CC, notifications, and ILHI information sent over the HI2, HI3, HI4, and ILHI handover interfaces respectively;
• specifies protocols for the transfer of IRI, CC, notifications, and ILHI across the handover interfaces;
• specifies protocol profiles for the handover interface.
The present document is designed to be used where appropriate in conjunction with other deliverables that define the service-specific IRI data formats (including ETSI TS 102 227 [i.1], ETSI TS 101 909-20-1 [33], ETSI TS 101 909-20-2 [34], ETSI TS 102 232-2 [5], ETSI TS 102 232-3 [6], ETSI TS 102 232-4 [32], ETSI TS 102 232-5 [37], ETSI TS 102 232-6 [36] and ETSI TS 102 232-7 [38]). Where possible, the present document aligns with 3GPP TS 33.108 [9], ETSI TS 101 671 [4], and ETSI TS 104 007 [49] and supports the requirements and capabilities defined in ETSI TS 101 331 [i.9] and ETSI TR 101 944 [i.4]. For the handover of intercepted data within GSM/UMTS PS and CS domains, the present document does not override or supersede any specifications or requirements in 3GPP TS 33.108 [9]. For the handover of services defined in 3GPP TS 33.128 [46], in the event of conflict between the present document and 3GPP TS 33.128 [46], the terms of 3GPP TS 33.128 [46] apply.

This document defines the test conditions and methods for assessing the performance of seals used in oil hydraulic reciprocating applications.

This document establishes a qualification scheme for virtual test environments (VTE) used in the evaluation of automated driving systems (ADS). It specifies criteria and procedures for assessing the VTE in open-loop and closed-loop configurations. This document does not apply to the validation or assessment of individual simulation models (for example, sensor or vehicle dynamics models) and does not apply to the evaluation of ADS performance.

IEC 62906-5-8:2026 specifies the standard measurement conditions and methods of scanning characteristics for raster-scanning laser display which uses a MEMS mirror as optical scanner and is designed for projection onto a flat screen.

This document specifies electronic fee collection (EFC) requirements for the preparation and evaluation of security requirements specifications, referred to as protection profiles (PP) in the ISO/IEC 15408 series and in ISO/IEC TR 15446.

This document specifies and gives guidelines for a standard test method for the assessment, using human participants, of thermal comfort in vehicles. It is not restricted to any particular vehicle but provides the general principles that allow assessment and evaluation. The method can be used to determine a measure of the performance of a vehicle for conditions of interest, in terms of whether it provides thermal comfort to people or not. This can be used in vehicle development and evaluation. This document is applicable to all types of vehicles, including cars, buses, trucks, off-road vehicles, trains, aircraft, ships, submarines, and to the cabins of cranes and similar spaces. It applies where people are enclosed in a vehicle and when they are exposed to outside conditions. For those exposed to outside conditions, such as riders of bicycles or motorcycles, drivers of open sports cars and operators of fork lift trucks without cabins, vehicle speed and weather conditions can dominate responses. The principles of assessment, however, still apply. This document applies to both passengers and operators of vehicles where its application does not interfere with the safe operation of the vehicle. It describes the principles of the assessment and evaluation of thermal comfort, including the use of test methods and trials. It also describes subjective methods that can be used in assessment.

This document specifies requirements and test methods for marketed and delivered fatty acid methyl esters (hereafter known as FAME) to be used either as fuel for diesel engines and for heating applications at 100 % concentration, or as a blend component for fuel for diesel engines and heating applications in accordance with the requirements of appropriate standards. At 100 % concentration it is applicable to fuel for use in diesel engines and in heating applications designed or subsequently adapted to run on 100 % FAME.
NOTE   For the purposes of this document, the terms “% (m/m)” and “% (V/V)” are used to represent respectively the mass fraction, µ, and the volume fraction, φ.

This document provides guidance on the implementation of effective governance of IT in an organization, in accordance with ISO/IEC 38500. It identifies the key activities that an organization can undertake and provides guidance on the design and establishment of the supporting and enabling arrangements for the governance of IT, clarifying the roles and responsibilities of key organizational stakeholders. This document can be used by individuals responsible for governance of IT in an organization, as well as individuals supporting the governance of IT in organizations, and is applicable to organizations of all sizes and types.

This document specifies the method for determination of the elongation under load and the residual deformation of coated fabrics.

This document specifies technical safety requirements and measures to be adopted by persons undertaking the design, manufacture and supply of press brakes which are intended to work cold metal or material partly of cold metal but which can be used in the same way to work other sheet materials (e.g. cardboard, plastic, rubber, leather) and also referred to as machines.
NOTE 1        The design of a machine includes the study of the machine itself, taking into account all phases of the “life” of the machine mentioned in ISO 12100:2010, 5.4, and the drafting of the instructions related to all the above phases.
This document covers the following types of machines (see Annex J):
hydraulic press brakes;
hydraulic servo-drive press brakes;
screw servo-drive press brakes;
belt-spring servo-drive press brakes.
The requirements in this document take account of intended use, as defined in ISO 12100:2010, 3.23, as well as reasonably foreseeable misuse, as defined in ISO 12100:2010, 3.24. This document presumes access to the press brake from all directions, deals with all significant hazards during the various phases of the life of the machine described in Clause 4, and specifies the safety measures for both the operator and other exposed persons.
NOTE 2        All significant hazards means those identified or associated with press brakes at the time of the publication of this document.
This document can also be used as a guide for the design of press brakes which are intended to be integrated in a manufacturing system.
This document deals with all significant hazards, hazardous situations or hazardous events relevant to press brakes and ancillary devices (see Clause 4) when it is used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer. This document specifies the safety requirements for press brakes defined in Clause 3.
This document does not cover press brakes which transmit energy to impart beam motion by using pneumatic means or mechanical clutch or press brakes that use combination of technologies (e.g. combined hydraulic and screw servo-drive press brake or combined hydraulic servo-drive and screw servo-drive press brake).
This document does not cover machines whose principal designed purpose is:
sheet folding by rotary action;
tube and pipe bending by rotary action;
roll bending.
This document does not cover hazards related to the use of press brakes in explosive atmospheres.
This document is not applicable to press brakes which are manufactured before the date of its publication.
This document does not cover the safety aspect of equipment for automatic workpiece loading and unloading where provided. Guidance on how to take into account additional automatic loading and unloading equipment can be found in ISO 11161:2007.

IEC TS 63202:2026 defines a hot water soaking test to determine whether crystalline silicon photovoltaic (PV) cells have metallization that is durable enough to be used in PV modules.
It is applied to crystalline silicon PV cells whose metallization is made with conductive metal pastes.
Hot water soaking test is an accelerated aging test carried out using conditions of high temperature and humidity. This test can be used to identify cells with poor metal adhesion. Such cells shed some of their metal during delivery and storage, causing visual defects and potential risk of module reliability issues.

This document gives guidance to organizations on developing policies and practices that are supportive of workers’ menstrual and menopausal health and experiences in the workplace.
This document is applicable to any organization regardless of size or sector and can be adapted to individual business needs.
This document does not apply to medical guidance or clinical options outside of the workplace. However, it does include reference to qualified sources where such information is available.
This document does not apply to andropause.

This document specifies requirements and test methods for pipes and fittings which are part of piping systems for the rehabilitation of underground non-pressure and pressure drains and sewers, and of water supply networks which transport water intended for human consumption, including raw water intake pipelines. This document is applicable to the renovation technique family "lining with cured-in-place pipes (CIPP)". It is not applicable to lining with discrete pipes or lining with pipe segments using glass-reinforced thermosetting plastics (GRP) material, as defined by ISO 11295. It is not applicable to short lengths of CIPP used for patch repair only of local pipe defects. It applies to the use of thermoset composite materials with various thermosetting resin systems, in combination with compatible fibrous carrier materials, reinforcement, and thermoplastics membranes (see 5.1). It is applicable to pipes and fittings, as manufactured, as well as to the installed system. It applies for service temperatures up to 50 °C for drains and sewers and up to 25 °C for water supply networks. For pressurised networks, this document applies to independent (fully structural, class A) and interactive (semi structural, class B) pressure pipe liners, as defined in ISO 11295, which do not rely on adhesion to the existing pipeline. It does not include requirements or test methods for resistance to abrasion, jetting, cyclic loading or impact, which are outside the scope of this document.

This document deals with electroplating process evaluation for fasteners, including fastener expected coating properties. This document is a complement to CQI-11 in order to deal with fastener specific aspects not fully covered by CQI-11, and to clarify some questions/items when they are not fully suitable for fasteners. This document is applicable to all parties involved in the supply chain for coated fasteners, i.e. fastener manufacturers, chemical suppliers, electroplaters and purchasers. The requirements for electroplating fasteners specified in this document are essentially based on ISO 4042, ISO/TR 20491 and ISO 16047. NOTE Requirements for electroplating fasteners are also given in ASTM F1941/F1941M.

This document specifies requirements for the thermal and energy performance of refrigerated food lockers in given environmental conditions and intended for the temporary cold storage of chilled or frozen pre-ordered or pre-selected foodstuff until the final collection by the consumer.
This document also covers construction characteristics relevant for thermal and energy performance.
This document specifies tests conditions and methods for checking the requirements to be satisfied as well as the classification of refrigerated lockers, their marking and the list of characteristics to be declared by the manufacturer.
This document is not applicable to refrigerated vending machines.
It is also not applicable to:
commercial beverage coolers covered by ISO 22044;
ice cream freezers covered by ISO 22043;
refrigerated display cabinets covered by ISO 23953-1 and ISO 23953-2;
cabinets intended for storage or cabinets intended for use, e.g. in catering or non-retail refrigerated applications.
This document does not cover health and safety aspects and ergonomic principles.
The document does not cover safe storage temperatures for any specific perishable foodstuff.
The refrigeration system, providing the cooling function, is either fully or partially integrated or completely remote from the refrigerated food locker and connected by interconnecting pipe-work.

This document specifies the requirements for dried thyme (Thymus vulgaris L.) in the form of rubbed leaves.
Recommendations relating to storage and transport conditions are given in Annex A.

This document specifies the requirements of winter savory (Satureja montana Linnaeus) in the form of sprigs, and whole or broken leaves.
It does not apply to summer savory (Satureja horfensis Linnaeus), which forms the subject of ISO 7928-2.
Recommendations relating to storage and transport conditions are given in Annex A.

This document provides guidance on the use of experience management (XM) in a service management system (SMS) based on ISO/IEC 20000-1. The target group for this document includes professionals and organizations interested in using XM. XM can focus on various aspects of experience with the services by customers, users, personnel, suppliers and other interested parties. XM practices are intended to optimize the value to interested parties and to improve the quality of the services provided. XM is not a stand-alone methodology but should be integrated into the existing or new SMS which is used to operate the services. NOTE This document does not distinguish between organizations providing services to internal or external customers (known as internal or external service providers). XM applies to internal and external service providers and their respective suppliers.

The present document specifies technical characteristics and methods of measurements for Mobile Earth Stations (MES) providing Low Bit Rate Data Communications (LBRDC) using Low Earth Orbit (LEO) satellites and which have the following characteristics:
- the MES as covered by the present document are a Based MES (BMES), a Vehicle mounted MES (VMES), or a Portable MES (PMES);
- the MESs operate through satellites in Low Earth Orbit (LEO) as part of a network providing Low Bit Rate Data Communications (LBRDC);
- these radio equipment are designed to operate in all or any part of the frequency bands given in table 1.
- The MESs have to be part of a satellite network and controlled and monitored by a Network Control Facility (NCF). The specification of the NCF is outside the scope of the present document.
NOTE 1: The acronyms "MSS" and "mss" refer to mobile satellite service (See list of abbreviations). Capital letters "MSS" refer to Primary MSS service. Lower case "mss" refers to secondary MSS service.
The present document is intended to cover the provisions of article 3.2 of Directive 2014/53/EU [i.3] (RE Directive).
NOTE 2: The relationship between the present document and essential requirements of article 3.2 of the Directive 2014/53 [i.3] is given in Annex A.

This document specifies the requirements for design, manufacture and installation of metal bellows expansion joints with circular cross section for pressure applications with maximum allowable pressure greater than 0,5 bar.

This document specifies a method for the determination of piperine content of peppers (Piper nigrum Linnaeus), whole or ground, as well as their extracts (Oleoresins) by high performance liquid chromatography.
This method also enables the separation and, if necessary, the determination of the other alkaloids of pepper (isochavicine, isopiperine and piperittin).

IEC PAS 61400-60:2026 will be applied to existing models already in use within the wind energy sector, as well as to future models (and updates of models) that will be used within the wind energy sector. As such, this document does not set specific requirements to model accuracy and precision but aims to transparently establish the performance of models in terms of accuracy and precision, both for the intended use as covered by measurements as well as the predictive capability of the model.
This document (and all documents under IEC PAS 61400-60 (all parts) aims at model validation but not model development. Specifically, this document further defines the model validation requirements in the following standards and operational documents:
- IEC 61400-1:2019,
- IEC 61400-5:2020,
- IEC 61400-27-2:2020,
- OD-501:2018 [2],
- OD-501:2022 [3],
- IECRE Clarification sheet CSH022 Ed 2.0

This document specifies methods for the olfactory and visual examination and determination of foreign matter and defects in green coffee from all origins. These methods can also be used for determining one or more of the characteristics of green coffee with an impact on coffee quality for technical, commercial, administrative and arbitration purposes, and for quality control or quality inspection.
This document is applicable to green coffee as defined in ISO 3509.

The present document specifies technical characteristics and methods for measurements for satellite communications Earth Stations (ES) with the following characteristics:
• The ES is designed for stationary operation.
• The ES is operating as part of a satellite network (e.g. star, mesh or point to point) used for the distribution and/or exchange of information.
• The transmit and receive frequencies are shown in Table 1.
• The ES transmits within the frequency range from 27,5 GHz to 29,1 GHz and 29,5 GHz to 30,0 GHz, which are bands allocated to the Fixed Satellite Services (FSS) (Earth-to-space) among other services.
• At the national level, terminals covered by the present document, might operate on a co-frequency basis, with stations of other FSS networks / systems or with stations of other services. The present document does not cover requirements for ensuring protection of such services.
• The ES receives within the range from 17,30 GHz to 20,20 GHz (FSS).
• The ES uses linear or circular polarization.
• The ES operates through non-geostationary satellites.
• The ES is designed for unattended operation and it does not address specifications or requirements for earth stations operating as gateways or master earth station.
• The ES is controlled and monitored by a Network Control Facility (NCF). This function may be performed centrally (e.g. for a network of ESs with a central hub) or it could be performed within the ES for autonomous control. The NCF is outside the scope of the present document.
• The ES has one or more directive antennas that track satellites. The present document may also be applicable to the frequency bands 30,0 GHz to 31,0 GHz (Earth-to-space) and 20,2 GHz to 21,2 GHz (space-to-Earth) subject to national regulation.
The present document applies to the ES including its ancillary equipment and its various telecommunication ports, and when operated within the boundary limits of the operational environmental profile as defined by the intended use of the ES. NOTE: The relationship between the present document and essential requirements of article 3.2 of Directive 2014/53/EU [i.1] is given in annex A.

IEC 63068-5:2026 provides definitions and guidance in use of X-ray topography inspection system for detecting defects in silicon carbide (SiC) homoepitaxial wafers. Additionally, this document exemplifies X-ray topographic images to enable the detection and categorization of defects in SiC homoepitaxial wafers.

1.1 This document specifies a sampling method for a consignment of instant coffee, shipped in 10 package units or more.
This document is applicable to cases which have inner linings of moisture-resistant material hermetically sealed because of the hygroscopic nature of instant coffee and which are in package units greater than 10 kg net mass, typically up to 50 kg. This document is also applicable to units of more than 50 kg, usually called “big bags” or “supersacks”. The cases are generally made of cardboard of appropriate strength and the big bags are made of suitable plastic material.
1.2 This document is also applicable to the selection and preparation of a sufficiently representative sample of the consignment, which is intended:
a) to serve as a basis for an offer for sale;
b) for examination to verify that the instant coffee to be offered for sale satisfies the producer’s sales specification;
c) for examination to determine one or more of the characteristics of the instant coffee for technical, commercial, administrative and arbitration purposes;
d) for retention as a reference sample for use, if required, in litigation.
1.3 This document is applicable to all types of instant coffee, as defined in ISO 3509, contained in all types of units with liners, with the exception stated in 1.4.
1.4 For bulk density and particle size, this document is applicable to spray-dried powder and freeze-dried instant coffees only, as defined in ISO 3509, due to the intrinsic fragility of particles of agglomerated instant coffee, which leads to greater breakdown and headspace in the final packed units for the consumer.

This document specifies requirements for black pepper (Piper nigrum L.) (see ISO 676), whole or ground at the following commercial stages:  
non-processed black pepper (NP) or semi-processed black pepper (SP);
processed black pepper (P), which can, in certain cases, be re-sold directly to the consumers.  
This document does not apply to black pepper categories called “light”.
NOTE Specifications for white pepper are given in ISO 959-2.
Recommendations relating to storage and transport conditions are given in Annex C.
Information regarding the microscopic structure of the pepper berry is given in Annex D.

This document reviews existing frailty indices and identifies common factors of frailty, laying a foundation for developing standardized frailty prediction models that can be used across clinical and demographic contexts to improve early identification and intervention efforts.

The present document applies to Mobile Earth Station (MES) radio equipment which have the following characteristics:
• the MES has both transmit and receive capabilities and operate in a Satellite-Personal Communications Network (S-PCN). An S-PCN MES can be a handheld, portable, vehicle-mounted, host connected, semi-fixed or fixed equipment, or can be an element in a multi-mode terminal. It consists of a number of modules with associated connections and user interface, or can be a self-contained single unit;
• these MESs are controlled and monitored by Control Monitoring Functions (CMF). The CMF is outside the scope of the present document;
• if the MES is an element in a multi-mode terminal, unless otherwise stated in the present document, its requirements apply only to the S-PCN MES element of the terminal operating in the MSS frequency bands given in table 1;
• the MES is capable in operating in all or part of the frequency bands shown in table 1.
NOTE: The relationship between the present document and essential requirements of article 3.2 of Directive 2014/53/EU [i.3] is given in annex A.

This document specifies requirements for white pepper (Piper nigrum L.) (see ISO 676), whole or ground, at the following commercial stages:  
semi-processed white pepper (SP);
processed white pepper (P).  
This document is not applicable to white pepper categories called “light”.
NOTE Specifications for white pepper are given in ISO 959-1.
Recommendations relating to storage and transport conditions are given in Annex B.

This document specifies the requirements for dehydrated tarragon (Artemisia dracunculus Linnaeus) (methylchavicol type; also called “estragole -type tarragon”) in the form of whole or cut leaves and powder.
It does not apply to the elemicin-sabinene-type tarragon.
Recommendations relating to storage and transport conditions are given in Annex A.

This document specifies the requirements of summer savory (Satureja hortensis Linnaeus) in the form of sprigs, and whole or broken leaves.
It does not apply to winter savory (Satureja montana Linnaeus), which forms the subject of ISO 7928-1.
Recommendations relating to storage and transport conditions are given in Annex A.

This document is applicable to electronic cigarettes and similar vapour producing devices intended to produce aerosol from e-liquids for consumption by inhalation. It is applicable to devices intended for use with e-liquids. This document is also applicable to e-liquid containers.
This document:
— specifies the considerations and approach required to establish levels of extractable and leachable substances in vaping products, e-liquid cartridges, and e-liquid refill containers;
— specifies a risk-based approach to enable manufacturers to understand the risk associated with the levels of extractable and leachable substances;
— describes an approach to toxicological risk assessment that contributes to an understanding of whether leachable compound levels are within acceptable limits over the anticipated shelf life of the product;
— builds on the requirements of CEN/TS 17287:2019, 5.1 [10] Material (migration) by detailing an analytical and toxicological approach to establish that “no e-liquid contact material shall transfer constituents into the e-liquid at levels that endanger human health”
— does not consider that substances may also transfer directly to the user via direct contact with components as this consideration is included in CEN/TS 17287;
— does not specify all testing necessary to establish the shelf life of products.

This document specifies the requirements for pimento or allspice [Pimenta dioica (L.) Merr.], whole or ground.
Recommendations relating to storage and transport conditions are given in Annex A.

IEC 63516:2026 defines the test method for providing uniform quality fixed folding durability test data to opto-electric wiring users. In particular, it provides a test condition for the tension and free tension folded state of the flexible opto-electric circuit boards of optic fibre type.