This document specifies a method for the determination of the mass concentration (μg/g) of tyre and road wear particles (TRWP) in soil or sediment environmental samples. This document establishes principles for soil or sediment sample collection, the generation of pyrolysis fragments from the sample, and the quantification of the generated polymer fragments. This document is applicable to the environmental samples from soil or sediment. This document is not applicable to the environmental samples from ambient air and ambient water.

  • Standard
    30 pages
    English language
    sale 15% off
  • Standard
    31 pages
    French language
    sale 15% off

This document specifies a system for the identification and presentation of information about freight containers. The identification system gives guidelines for general application, for example in documentation, control and communications (including automatic data processing systems), as well as for display on the containers themselves. It defines the methods of displaying identification and certain other data (including operational data) on containers by means of permanent marks. This document specifies: a container identification system, with an associated system for verifying the accuracy of its use of marks; a coding system for data on container size and type, with corresponding marks for their display; operational marks, both mandatory and optional; physical presentation of marks on the container. This document defines the terms “mandatory” and “optional” and provides guidelines for the use of the designated marks. The terms “mandatory” and “optional” do not refer to the requirements of any regulatory body. This document is applicable to all freight containers covered by ISO 668, the ISO 1496 series, ISO 8323 and is applicable to: containers other than those covered by the International Standards listed in Clause 2; container-related or detachable equipment, or both. NOTE 1 Containers marked according to previous editions of this document need not be re-marked. This document does not apply to temporary operational marks of any kind, permanent marks, data plates, etc. which can be required by intergovernmental agreements, national legislation or nongovernmental organizations. NOTE 2 Some of the major international conventions whose container-marking requirements are not covered in this document are as follows: International Convention for Safe Containers (1972, as amended) (CSC), International Maritime Organization (IMO); Customs Convention on Containers 1956 and 1972, related to temporary admission and transport under customs seal. Convention on Temporary Admission (Istanbul, 26 June 1990), related to temporary admission. This document does not cover the display of technical data on tank containers (see ISO 1496-3), nor does it, in any way, include identification marks or safety signs for items of cargo which can be carried in freight containers.

  • Standard
    26 pages
    English language
    sale 15% off
  • Standard
    27 pages
    French language
    sale 15% off

This document introduces the architecture and concepts of ITS facilities layer services, and provides respective general requirements.

  • Technical specification
    9 pages
    English language
    sale 15% off

This document specifies a method for determining the water vapour transmission rate (often erroneously called “permeability”) of sheet materials. This method is generally not applicable for use if the transmission rate is expected to be less than 1 g/m2 per day or for materials thicker than 3 mm. In such cases, the method specified in ISO 9932 can be applied. This document is not applicable to materials that change dimensionally (shrink or expand) to an appreciable extent under the test conditions used. For materials that are damaged by hot wax, only mechanically-sealed test dishes can be used. For cases where determination of the transmission rate of creased material is needed, a procedure is specified in Annex B.

  • Standard
    20 pages
    English language
    sale 15% off
  • Standard
    22 pages
    French language
    sale 15% off

This document specifies requirements for single-use burettes to be used as subcomponents within sterilised infusion and transfusion sets for single use under gravity feed conditions or with pressure infusion apparatus. NOTE 1 Annex B provides explanations about the history of the development of the standard and summarises the different arguments discussed within ISO/TC 76 during the collaboration of this document. NOTE 2 Annex C provides recommendations regarding sustainability. NOTE 3 Annex D provides information on attributive and variable testing.

  • Standard
    14 pages
    English language
    sale 15% off
  • Standard
    14 pages
    French language
    sale 15% off

This document specifies methods for determining the change of appearance and stability of textile floor coverings or any damage caused by detachment of layers, opening of joints, cracks, or crazing of resilient, laminate or modular mechanical locked floor coverings under the movement of a swivel castor chair.

  • Standard
    22 pages
    English language
    sale 15% off
  • Standard
    22 pages
    French language
    sale 15% off

This document specified the test cycles for measurement for the gaseous exhaust emissions from motorcycles, and for determining the fuel consumption of motorcycles as defined in ISO 3833. It is applicable to motorcycles equipped with a spark ignition engine (four-stroke engine or rotary piston engine).

  • Standard
    61 pages
    English language
    sale 15% off

This document specifies registered Common Biometric Exchange Formats Framework (CBEFF) patron formats defined by the CBEFF patron ISO/IEC JTC 1/SC 37 and specifies their registered CBEFF patron format types (see ISO/IEC 19785-1) and resulting full ASN.1 OIDs (see Annex A for rules on how patron formats are defined using CBEFF data elements).

  • Standard
    140 pages
    English language
    sale 15% off

This document defines terms related to pneumatic tyres, i. e. tyres suitable for containing a gas at a pressure which can be adjusted. This document specifies the corresponding codes, symbols and values for these tyres. NOTE For other terms used in this field and their equivalents in other languages, see ISO 3877 (all parts). For terms and definitions relating to wheels and rims, see ISO 3911.

  • Standard
    28 pages
    English language
    sale 15% off

This document provides a fire engineering application relative to the fire resistance assessment of a fifteen-storey steel framed building following the methodology given in ISO 24679-1. This document describes the adopted process which follows the same step by step procedure as that provided in ISO 24679-1. The annexes of this document present the detailed assessment results for this building.

  • Technical report
    52 pages
    English language
    sale 15% off

This document specifies the test methods for measurement and determination of the compressive strength of sprayed concrete at different age, from young hardened to long term hardened sprayed concrete. The test methods could be applied to measure compressive strength of sprayed concrete in the range of 0,2 MPa to 100 MPa. The specimens of hardened sprayed concrete are extracted from either an in-situ element or a test panel.

  • Standard
    12 pages
    English language
    sale 15% off

This document provides the design content and technical specification for the scheme of the multi-component thermal flooding development plan, which is applicable to onshore and offshore heavy oil reservoirs.

  • Technical specification
    12 pages
    English language
    sale 15% off

This document specifies the properties of the piping system and its components made from glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester (UP) resin. It is suited for all types of water supply, drainage and sewerage with or without pressure. Types of water supply include, but are not limited to, raw water, irrigation, cooling water, potable water, salt water, sea water, penstocks in power plants, processing plants and other water-based applications. This document is applicable to GRP-UP piping systems, with flexible joints, intended to be installed using jacking techniques. It specifies the characteristics of pipes made from GRP-UP, with or without aggregates or fillers. It also specifies the test parameters for the test methods referred to in this document. This document is applicable to circular pipes and joints with a size range from DN 100 to DN 4 000 at normal service conditions. This document covers requirements to demonstrate the adequacy of the design of the joint and specifies type test performance requirements for the joints as a function of the declared nominal pressure rating of the pipeline system and the required joint deflection capability of the system. The determination of longitudinal compressive properties of a pipe are given in Annex A and Annex B. The procedure for the calculation of the design jacking load on a GRP (UP) pipe is given in Annex C. Requirements for GRP-fittings, used between pipe systems covered by this document, are given in ISO 23856.

  • Standard
    43 pages
    English language
    sale 15% off

This document specifies the information to be included in specification sheets for electrophotographic digital copying machines and multi-function devices. This document is applicable to purchasers and users, enabling them to compare the characteristics of different models of copying machines and multi-function devices for easier selection of products that meet their requirements.

  • Standard
    30 pages
    English language
    sale 15% off

This part of IEC 61300 describes a test to quantitatively assess the capability of a connector terminating a reinforced cable of any diameter or a buffered fibre, both single-mode and multimode, to withstand static loads without uncoupling of the connector, physical damage to the assembly or permanent degradation of optical performance.

  • Standard
    14 pages
    English language
    e-Library read for

This document specifies the requirements and test methods for Polygonati rhizome, which is derived from the plant of Polygonatum kingianum Collett & Hemsl., Polygonatum sibiricum Redouté, and Polygonatum cyrtonema Hua (Fam. Liliaceace). This document is applicable to Polygonati rhizome that is sold and used as herbal raw materials in the international trade, including Chinese materia medica (whole medicinal materials) and decoction pieces derived from this plant.

  • Standard
    13 pages
    English language
    sale 15% off

This document specifies a classification framework and terminology of simulation models for perception sensors in advanced driver assistance systems and automated driving (ADAS/AD) use cases. It builds upon the overall framework defined in ISO 11010-1 [2], which is applicable to vehicle dynamic models. This document focuses on perception sensor models for radar, camera, lidar and ultrasonic sensors. This document enables a structured approach for perception sensor model selection and provides a foundation for consistent sensor model comparison. The model classification is based on the modelling approach of the sensor model and its environment, as well as the necessary inputs and outputs of the model.

  • Standard
    21 pages
    English language
    sale 15% off

This document specifies methods, recommended technical approaches, and results for the evaluating of coalbed methane (CBM) recoverability. This document is applicable to the exploration, appraisal and production capacity building of CBM. It also provides certain references for the development and adjustment phases.

  • Standard
    17 pages
    English language
    sale 15% off

This document specifies the general guidelines for Chinese materia medica specification. This specification is relevant for dividing Chinese materia medica into categories.

  • Standard
    9 pages
    English language
    sale 15% off

This part of IEC 60794 defines the test procedures used to establish uniform requirements for mechanical performance – Indoor simulated installation test. It applies to optical fibre cables for use with telecommunication equipment and devices employing similar techniques, and to cables having a combination of both optical fibres and electrical conductors.
Throughout this document the wording “optical cable” can also include optical fibre units, microduct fibre units, etc.

  • Standard
    13 pages
    English language
    e-Library read for

This document specifies a general method of test for comparing the colour of a coloured pigment with that of an agreed sample.

  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    4 pages
    French language
    sale 15% off

This document specifies methods for the determination of silicon, nitrogen, aluminium, iron, calcium, oxygen, carbon, fluorine, and chlorine in silicon nitride powders.
This document is applicable for the chemical analysis of silicon nitride powders used as raw material for fine ceramics.

  • Standard
    40 pages
    English language
    e-Library read for

This sheet of IEC 60674-3 (all sheets) [3] gives the requirements for biaxially oriented polypropylene film having a smooth or rough surface, corona treated when required for vacuum metallization. The films are for use as dielectric in capacitors.
Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application is based on the actual requirements necessary for adequate performance in that application and not based on this specification alone.
Safety warning: It is the responsibility of the user of the methods contained or referred to in this document to ensure that they are used in a safe manner.

  • Standard
    16 pages
    English language
    e-Library read for

This document provides trustworthiness requirements and guidance for data space participants in support of trusted data transactions.
Specifically, it defines a set of foundational principles for trusted data transactions, and establishes general requirements and guidance that apply to all phases of a trusted data transaction, and specific requirements for each phase of a trusted data transaction.
This document applies to all types of organizations participating in data spaces, regardless of their type or size.

  • Standard
    25 pages
    English language
    e-Library read for

This document specifies long-term measurement methods to obtain trackside noise emission values of multiple trains passing by, automated and unattended, of all kinds of vehicles operating on rails in regular operation, taking into consideration the specific environmental, track and vehicle conditions.
It specifies conditions the measurement setup, data analysis and data processing methods.
The results are datasets of pass-by sound pressure levels or third octave spectra for different sites, train types, units (vehicles) which can be used for different reporting objectives and data analysis. The following are described within the document:
-   comparison of results from different scenarios, e.g. to evaluate the noise reduction of innovative techniques or acoustically relevant modifications to the track structure on a particular track section;
-   trend analysis;
-   averaging procedures, e.g. for determination of acoustic parameters for source term calculations as given in EN 17936 or sites with other infrastructure related sources (such as bridges, crossings, switching, impact noise, curving noise).
This document is not applicable to:
-   type testing;
-   attended measurements;
-   parked or stationary vehicles;
-   shunting yards;
-   positions beyond 25 m from the track;
-   obstructed positions such as behind barriers or around dwellings.
NOTE      The procedures specified in this normative document are of survey grade (grade 2) as defined in EN ISO 12001.

  • Technical specification
    36 pages
    English language
    e-Library read for

This part of IEC 60695 specifies methodologies of fire safety engineering for electrotechnical products by providing:
– an explanation of the principles and uses of fire safety engineering;
– guidance on the use of fire safety engineering in the design of electrotechnical products;
– fire safety engineering terminology, and concepts;
– an indication of properties, data and tests needed for input into fire safety engineering assessment; and
– informative references.
This document is intended to provide guidance for product committees on fire safety engineering methods and performance-based tests for use in performance-based designs and fire hazard assessments of electrotechnical materials, assemblies, products and systems. More detailed information on fire safety engineering is contained in ISO 23932-1 [1].
NOTE Further detailed aspects of FSE are covered in ISO 16730-1 [2], ISO 16732-1 [3], ISO 16733-1 [4], ISO 24678-2 [5], ISO 24678-3 [6], ISO 24678-4 [7] and ISO/TR 16738 [8].
This basic safety publication focusing on safety guidance is primarily intended for use by committees in the preparation of safety publications in accordance with the principles laid down in IEC Guide 104 [39] and ISO/IEC Guide 51 [40]
One of the responsibilities of a committee is, wherever applicable, to make use of basic safety publications in the preparation of its publications.
This document has the status of a horizontal publication in accordance with IEC Guide 108 [43].

  • Standard
    24 pages
    English language
    e-Library read for

This part of the document specifies the method of applications to obtain the OAuth tokens in an appropriately secure manner for higher risk access to data; applications to use OpenID Connect to identify the customer; and using tokens to interact with the REST endpoints that provides protected data. This document is applicable to higher risk use cases which includes commercial and investment banking and other similar industries.

  • Standard
    20 pages
    English language
    sale 15% off

This document specifies the service and operational concept of the electric road system (ERS) with dynamic charging capability. The in-vehicle control system is not within the scope of this document.

  • Standard
    11 pages
    English language
    sale 15% off

This document describes steps for designing and assessing the whole-building mechanical ventilation system for residential buildings, and the points to be taken into account regarding indoor environment and energy consumption. This document allows the designer to plan a whole-building mechanical ventilation system that improves indoor air quality, the auditory environment and thermal comfort, while also using energy in a practical way. It describes the performance of the building in order to effectively operate a whole-building mechanical ventilation system. This document does not cover: criteria for indoor air quality; criteria for indoor thermal comfort (covered by ISO/TC 159); criteria for auditory environment (covered by ISO/TC 43); evaluation methods of energy performance of heating and cooling equipment; evaluation methods of energy performance of ventilators (covered by ISO/TC 86); evaluation methods of energy performance of heat recovery components (covered by ISO/TC 86); evaluation methods of building performance (covered by ISO/TC 163); design steps and evaluation method of localized ventilation equipment; ventilation systems using natural driving force in all ventilation airflow paths.

  • Standard
    38 pages
    English language
    sale 15% off

This part of IEC 60794 specifies the test procedures used to establish uniform requirements on abrasion resistance for optical fibre cables.
This document applies to optical fibre cables for use with telecommunication equipment and devices employing similar techniques, and to cables having a combination of both optical fibres and electrical conductors.
Method E2A evaluates the ability of the sheath to resist abrasion; method E2B evaluates the ability of cable markings (include text or graphic markers, and continuous coloured lines on cable) to resist abrasion.

  • Standard
    12 pages
    English language
    e-Library read for

This document specifies the role architecture of electric road systems (ERS) with dynamic charging capability. The in-vehicle control system is not within the scope of this document.

  • Standard
    15 pages
    English language
    sale 15% off

This document specifies the sampling of urban and industrial waste water, i.e. the design of sampling programmes and techniques for the collection of samples. This document covers waste water in all its forms, i.e. industrial waste water, radioactive waste water, cooling water, raw and treated urban waste water. This document deals with various sampling techniques used and the rules to be applied to ensure the samples are representative. This document does not cover sampling of accidental spillages, although the methods described in certain cases can also be applicable to spillages. This document is not applicable to sampling of microplastics in waste waters. Appropriate guidance is given in ISO 5667-27.

  • Standard
    47 pages
    English language
    sale 15% off

This part of IEC 60953 establishes a Supplementary Standard for routine testing of steam turbines.
The rules given in this document follow the guidance given in IEC 60953-0, but contain amendments and supplements regarding the analysis and supervision of relative performance by routine testing of steam turbine.
General principles for the preparation, performance evaluation, trends of performance parameters and the determination of the measurement uncertainty of periodic routine tests are given in this document.
This document is applicable to routine testing covering a wide range of accuracy on steam turbines of every type, rating and application, operating with superheated or saturated steam.
This document is not intended for application in acceptance tests of new units or retrofits and its application for such is strongly not recommended.

  • Standard
    80 pages
    English language
    e-Library read for

This Guide outlines the rules for drafting and presenting candidate performance harmonized European Standards (hENs) for construction products under Regulation (EU) 2024/3110, known as the Construction Products Regulation CPR-2024. These standards are subject to a standardization request according to Article 5 of CPR-2024.
This Guide gives rules which are additional to the CEN-CENELEC Internal Regulations (IR) - Part 3 (based on ISO/IEC Directives, Part 2) when this is necessary because of the special provisions of harmonized product standards in the construction sector.
This Guide applies to all new candidate hENs and for new Work Items (WIs) revising/amending existing hENs included in a standardization request in support of CPR-2024.
This guide does not include rules for candidate harmonized European Standards under Regulation (EU) No 305/2011 or for those harmonized European Standards within the framework of Regulation (EU) 2024/3110 that are subject to a standardization request according to Article 7 of this Regulation.

  • Guide
    58 pages
    English language
    e-Library read for

The present document specifies the UE capabilities applicable to an On-Board FRMCS Radio Module.
NOTE: The present document does not specify UE capabilities applicable to FRMCS-capable Handhelds and FRMCS-capable Objects.

  • Standard
    9 pages
    English language
    sale 15% off
  • Standard
    9 pages
    English language
    sale 15% off
  • Technical specification
    9 pages
    English language
    e-Library read for

This document specifies terms and associated definitions that are typically used for fine ceramics (advanced ceramic, advanced technical ceramic) materials, products, applications, properties and processes. This document also includes abbreviated terms that have found general acceptance in scientific and technical literature; each abbreviation is given with the corresponding full term and definition or description. In this document, terms are defined using the term ‘fine ceramic’. The definitions apply equally to ‘advanced ceramics’ and ‘advanced technical ceramics’, which are considered to be equivalent. This document does not include terms which, though used in the field of fine ceramics, are of a more general nature and are also well known in other fields of technology. NOTE Terms and definitions of a more general nature are available in ASTM C 1145, EN 14232 and JIS R 1600.

  • Standard
    34 pages
    English language
    sale 15% off

This document specifies general safety requirements for self-loading mobile concrete mixers (here-after referred to as "SLMs") as defined in ISO 18650-1:2021, with rigid or articulated wheeled chassis.
This document applies to SLMs which are designed for front or rear loading and can be provided with a slewing and/or tilting frame where the rotating drum and the self-loading equipment (lift arms and bucket) are mounted on. SLMs can also be fitted with accessories such as water dosing means and a weighing system.
This document is not applicable to the following:
-   machines designed primarily for earth moving, such as loaders or dumpers (see applicable parts of the EN 474 series);
-   truck mixers (see EN 12609).
This document deals with all significant hazards, hazardous situations and events relevant to SLMs, whether used as intended and under conditions foreseen or under conditions of misuse reasonably foreseeable by the manufacturer (see Annex A).
This document does not provide performance levels required for safety related functions of control systems.
NOTE   A document providing detailed description of safety functions for SLMs and related performance levels required is under development.
This document does not address hazards that can occur:
-   during manufacture;
-   when using SLMs on public roads, where specific local road regulations can apply;
-   when operating in potentially explosive atmospheres.
This document does not address hazards specifically related to:
-   SLMs designed to operate with varying levels of autonomy or when SLMs have embedded safety-systems with fully or partially self-evolving behaviour or logic using machine learning approaches, including collaborative applications;
-   SLMs when intended to be connected to the internet or to an external network or device that communicates with it (protection against corruption).
This document is not applicable to SLMs manufactured before the date of its publication.

  • Standard
    52 pages
    English language
    e-Library read for

The present document specifies PAdES digital signatures. PAdES signatures build on PDF signature mechanisms defined in the ISO 32000 series. For documents conforming to ISO 32000-1 [1] PAdES utilizes an extended, alternative signature encoding. For documents conforming to ISO 32000-2 [9], these signature structures are incorporated natively by default within the core standard. Both approaches support digital signature formats equivalent to the signature format CAdES as specified in ETSI EN 319 122-1 [2], by incorporation of signed and unsigned attributes, which fulfil certain common requirements (such as the long term validity of digital signatures) in a number of use cases. The present document specifies formats for PAdES baseline signatures, which provide the basic features necessary for a wide range of business and governmental use cases for electronic procedures and communications to be applicable to a wide range of communities when there is a clear need for interoperability of digital signatures used in electronic documents. The present document defines four levels of PAdES baseline signatures addressing incremental requirements to maintain the validity of the signatures over the long term, in a way that a certain level always addresses all the requirements addressed at levels that are below it. Each level requires the presence of certain PAdES attributes, suitably profiled for reducing the optionality as much as possible. Procedures for creation, augmentation, and validation of PAdES digital signatures are out of scope and specified in ETSI EN 319 102-1 [10]. Guidance on creation, augmentation and validation of PAdES digital signatures including the usage of the different attributes defined in the present document is provided in ETSI TR 119 100 [i.4]. The present document aims at supporting electronic signatures in different regulatory frameworks. NOTE: Specifically but not exclusively, PAdES digital signatures specified in the present document aim at supporting electronic signatures, advanced electronic signatures, qualified electronic signatures, electronic seals, advanced electronic seals, and qualified electronic seals as per Regulation (EU) No 910/2014 [i.2].

  • Standard
    29 pages
    English language
    sale 15% off
  • Standard
    29 pages
    English language
    sale 15% off
  • Standard
    29 pages
    English language
    e-Library read for

The present document provides a framework for standardized catalogue metadata in data spaces, in support of the publication and discovery of data products and to assure findability of data products within and across data spaces. The present document:
a) sets out the common catalogue metadata, the minimum set to be applied across all common European data spaces;
b) establishes rules on the setting out of catalogue metadata extensions, specific to a domain-specific data space or to a specific data spaces set.

  • Standard
    39 pages
    English language
    sale 15% off
  • Standard
    40 pages
    English language
    sale 15% off
  • Standard
    40 pages
    English language
    sale 15% off
  • Standard
    40 pages
    English language
    e-Library read for

This document specifies a framework for mass customization value chain management, including the framework model, functions and information flow of mass customization. This document does not describe interoperability at a system level or interoperability throughout the life cycle in detail.

  • Standard
    37 pages
    English language
    sale 15% off

The present document specifies the FRMCS Transport Stratum for the Future Railway Mobile Communications System (FRMCS). In general, the FRMCS Transport Stratum provides data connectivity and the related services. The present document covers:
• 3GPP terrestrial access.
• Transport stratum interconnection scenarios in all aspects.
• 3GPP access sharing, mobility within transport stratum.
• QoS and policy control.
• Authentication and authorization for the use of the transport stratum.
• Transport stratum common features.

  • Standard
    39 pages
    English language
    sale 15% off
  • Standard
    40 pages
    English language
    sale 15% off
  • Standard
    40 pages
    English language
    sale 15% off
  • Technical specification
    40 pages
    English language
    e-Library read for

The present document specifies the interfaces of the On-Board FRMCS enabling either interaction with On-Board applications or with FRMCS entities outside the train. The present document also specifies the On-Board Multipath Function and a set of procedures the On-Board FRMCS will need to conform to.

  • Standard
    29 pages
    English language
    sale 15% off
  • Standard
    30 pages
    English language
    sale 15% off
  • Standard
    30 pages
    English language
    sale 15% off
  • Technical specification
    30 pages
    English language
    e-Library read for

This document specifies the safety rules for lifts permanently serving buildings and constructions and intended for the transport of persons or persons and goods. It applies to traction lifts, positive drive lifts and hydraulic lifts that:
serve specific levels; and
have a rated speed exceeding 0,15 m/s; and
have an enclosed car; and
move along guide rails inclined not more than 15° to the vertical; and
    are indoor or weather-protected.
This document also applies to the electrical equipment of these lifts including the lighting and socket outlets in the well.
This document specifies safety rules related to:
persons to be safeguarded:
users, including passengers, maintenance and inspection personnel;
persons at the landings and outside of the well, or any machinery space and pulley room, who can be affected by the lift.
property to be safeguarded:
loads in the car;
components of the lift installation;
building in which the lift is installed.
This document does not specify additional requirements for:
lifts serving buildings with requirements for seismic conditions;
lifts serving buildings with requirements for accessibility;
lifts exposed to vandalism;
lifts which can be used for firefighting and evacuation purposes under firefighters control;
lifts which can be used to support faster evacuation of persons with disabilities;
the behaviour of the lift when the control system of the lift receives a recall signal(s) in the event of fire in a building.
This document is not applicable to passenger and goods passenger lifts, which are installed before the date of its publication.

  • Standard
    213 pages
    English language
    e-Library read for

The present document defines the Service Stratum for the Future Railway Mobile Communications System (FRMCS). In general, the FRMCS Service Stratum provides communication service and corresponding complementary service resulting from 3GPP Mission Critical Services (MCX) and 3GPP multimedia system. While FRMCS is defined in various FRMCS ETSI Technical Specifications, the present document determines necessary components of the FRMCS Service Stratum, encompassing:
• Building blocks and corresponding reference points of 3GPP MCX/IMS.
• Reference points between MC systems/IMS for interconnection and unilateral use by MC organizations
(MC migration).
• Reference points between the MC system/IMS and external systems.
• QoS and priority management.
• User identification, authentication and authorization for the use of the FRMCS service stratum.
• Communication security aspects.
• Complementary and auxiliary service, e.g. alternative user addressing schemes.

  • Standard
    34 pages
    English language
    sale 15% off
  • Standard
    34 pages
    English language
    sale 15% off
  • Standard
    34 pages
    English language
    sale 15% off
  • Technical specification
    34 pages
    English language
    e-Library read for

This document specifies an accelerated method for the determination of wet-scrub resistance. The determination of cleanability is not covered in the scope of this document.
NOTE            The ability of coatings to withstand wear caused by repeated cleaning operations is an important consideration both from a practical point of view and when comparing and rating such coatings. Since wet-scrub resistance depends not only on the quality of a coating but also on the substrate, the method of application, the drying conditions and other factors, the results obtained are not directly transferable to actual practice. In this document, the evaluation of the coating is based on a defined substrate, a fixed application method, specified drying conditions and a defined method of wet scrubbing.

  • Standard
    25 pages
    English language
    e-Library read for

This document specifies photometric methods of test for comparing in the visible spectrum:
a) the tinting strength of two similar coloured pigments dispersed in an alkyd resin without a drier;
b) the scattering power of two white pigments of the same type dispersed in an alkyd resin without a drier.
This document does not apply to the comparison of coloured pigments that on reduction differ greatly in colour.

  • Standard
    20 pages
    English language
    e-Library read for

This document specifies the safety requirements and measures for double blade circular sawing machines for cross-cutting with integrated feed of the cutting-stroke, with manual loading or unloading of the workpiece or both and capable of continuous production use, hereinafter referred to also as “machines”. The machines are designed to cut solid wood and materials with similar physical characteristics to wood, and: aluminium profiles also filled or composed with plastic, or foam or rubber based insulating materials; composite materials, with core consisting of, for example, polyurethane or mineral material, laminated with light alloy; polymer‐matrix composite materials and reinforced with thermoplastic, or thermoset or elastomeric materials; fibreglass; composite bars made from the materials listed above. This document deals with all significant hazards, hazardous situations or hazardous events, listed in Annex A, relevant to the machine, when it is used as intended and under conditions of misuse which are reasonably foreseeable. This document is also applicable to the other life cycle phases of the machines: transport, assembly, adjustment, maintenance, dismantling and scrapping. This document does not deal with specific hazards related to mechanized loading and material buffer. This document is not applicable to: machines for cross-cutting logs; machines intended for use in potentially explosive atmosphere; machines manufactured prior to the publication of this document.

  • Standard
    32 pages
    English language
    sale 15% off
  • Standard
    34 pages
    French language
    sale 15% off

This document specifies requirements, test methods and performance criteria for thermal image fire detectors (TIFD), which operate in the infrared spectrum, for use in fire detection and alarm systems installed in and around buildings. Detectors developed for the protection of specific risks that incorporate special characteristics (including additional features or enhanced functionality for which this document does not define a test or assessment method) are beyond the scope of this document.

  • Standard
    41 pages
    English language
    sale 15% off