Search Catalog

This document specifies coupling between handpieces and motors that are connected to dental units. For the purposes of this document, the couplings described in this document are not equipped with electronic terminal(s).
This document specifies the nominal dimensions, tolerances and extraction force of coupling systems for use between handpieces and motor which supply the handpiece with water, air and light and rotation energy.

This document provides requirements and specific guidance for the safe operation and maintenance of optical fibre communication systems (OFCSs). In these systems, optical power is possibly accessible outside the confines of the transmitting equipment and/or at great distance from the optical source.
This document requires the assessment of hazard level at each accessible location of the OFCS as a replacement for product classification according to IEC 60825-1. It applies to the installed OFCS as an engineered, end-to-end assembly for the generation, transfer and receipt of optical radiation arising from lasers, light-emitting diodes (LEDs) or optical amplifiers, in which the transference is by means of optical fibre for communication and/or control purposes.
NOTE 1 Throughout this document, a reference to 'laser' is taken to include LEDs and optical amplifiers.
Individual components and subassemblies that fall under the definition of a laser product are subject to the applicable subclause(s) of IEC 60825-1. This document is applicable to individual components and subassemblies intended to be installed within OFCSs.
This document does not apply to optical fibre systems primarily designed to transmit optical power for applications such as material processing or medical treatment.
In addition to the hazards resulting from laser radiation, OFCSs possibly give rise to other hazards, such as fire.
This document does not address safety issues associated with explosion or fire with respect to OFCSs deployed in explosive atmospheres.
NOTE 2 The hazard presented by optical radiation emerging from a fibre is determined by the wavelength and power emerging from the fibre and also by the optical characteristics of the fibre itself (see Annex A).

This document specifies requirements and test methods for operating lights used in dental treatment and intended for illuminating the oral cavity of patients. It also contains specifications on the instructions for use, marking and packaging.
This document applies to operating lights, irrespective of the technology of the light source.
This document excludes auxiliary light sources and those intended for patient contact, e.g. from dental handpieces and dental headlamps, fibreoptic intraoral operating lights and operating lights which are specifically designed for use in oral surgery.

This document supplements or modifies the corresponding clauses in IEC 62841-1, so as to convert it into the IEC Standard: Particular requirements for transportable planers and thicknessers.
IEC 62841-1:2014, Clause 1 is applicable, except as follows:
This document applies to transportable planers, thicknessers and combined planers and thicknessers intended for cutting wood and analogous materials with a maximum planing width of 330 mm.
This document does not apply to planers, thicknessers or combined planers and thicknessers other than transportable.
NOTE 101 ISO 19085-7:2019 gives requirements for planers, thicknessers or combined planers and thicknessers other than transportable.

This document specifies the requirements and methods for the clinical investigation of medical electrical (ME) equipment used to measure the body temperature in indirect measurement mode.
This document covers both intermittently and continuously measuring clinical thermometers.
NOTE 1        This document does not apply to clinical thermometers measuring the body temperature in direct measurement mode.
NOTE 2        For clinical thermometers in direct measurement mode determining the technical accuracy in accordance with ISO 80601-2-56:—1) is considered sufficient.
This document is applicable to clinical thermometers with claimed measurement time shorter than 60 seconds (for methods such as oral or rectal measurement), or shorter than 5 minutes (for methods such as axillary measurement), and which are treated as predictive type thermometers and fall under the scope of this document.
This document specifies additional disclosure requirements.
This document does not apply to the clinical investigation of a screening thermographs for human febrile temperature screening whose laboratory accuracy requirements are described in IEC 80601-2-59.
This document does not apply to pulmonary artery catheter for the determination of cardiac output by thermodilution.
NOTE 3        ISO 80601-2-56:—1) does include pulmonary artery catheter for the determination of cardiac output by thermodilution.

This document specifies requirements for oropharyngeal airways.
This document is not applicable to metal oropharyngeal airways, nor to requirements concerning flammability of oropharyngeal airways.
This document is not applicable to supralaryngeal airways, which are covered by ISO 11712[1].
The requirements that are also applicable to other airway devices have been removed from this document as they now appear in the general airway device standard (ISO 18190).
The requirements in this device-specific standard take precedence over any conflicting requirements in the general standard for airway devices (ISO 18190).

This document specifies general interface requirements for small-bore connectors that form part of a medical device or accessory that conveys liquids or gases to a patient.
This document also identifies the applications for which these small-bore connectors are intended to be used, which include, but are not limited to:
—     respiratory;
—     enteral;
—     limb cuff inflation;
—     neural;
—     intravascular or hypodermic;
—     other use cases utilizing an ISO 80369-7 small-bore connector.
This document provides the methodology to assess non-interconnectable characteristics of small-bore connectors based on their inherent design in order to reduce the risk of misconnections between medical devices or between accessories for different applications as specified in this document as well as those that can be developed under future parts of the ISO and IEC 80369 series.
NOTE            Clause A.2 contains guidance or rationale for this Clause.

IEC 61754-2: 2026 defines the standard interface dimensions for type BFOC/2,5 family of connectors. This second edition cancels and replaces the first edition published in 1996. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) addition of Clause 2, Clause 3 and the Bibliography; b) addition of the active device receptacle interface type; c) revision of the ferrule grades to refer to the connector optical interfaces specified in the IEC 61755-3 series; d) revision of the ferrule end face geometry to refer to the connector optical interfaces specified in the IEC 61755‑3 series and IEC 63267‑3 series; e) improvement of the description of the characteristics of the resilient alignment sleeve for adaptor and rigid bore sleeve for active device receptacle; f) harmonisation of the dimensions of reference A for the rigid bore sleeve with other connector interface standards in IEC 61754 series.

This document specifies the presentation of lexicographic entries in general language dictionaries, whether monolingual, bilingual or multilingual, following a lexicographic lemma-oriented approach, and intended for human end-users. Concerning the modelling of the underlying data, this document follows the ISO 24613 series. The document provides recommendations for addressing the heterogeneous structures of data presentation in lexicographic entries, both in printed and digital dictionaries. This document also establishes core concepts related to the broader scope of lexicographic work.

This document specifies the requirements for dehydrated tarragon (Artemisia dracunculus Linnaeus) (methylchavicol type; also called “estragole -type tarragon”) in the form of whole or cut leaves and powder. It does not apply to the elemicin-sabinene-type tarragon. Recommendations relating to storage and transport conditions are given in Annex A.

This document specifies requirements and gives recommendations for the periodic inspection and testing of permanently mounted tubes of: composite with seamless metallic liners; composite with non-load-sharing liners; seamless steel; in battery vehicles and multiple element gas containers (MEGCs) including frames and associated equipment (these components are also inspected); and large tubes of: composite with seamless metallic liners; composite with non-load-sharing liners; in modules including frames and associated equipment (these components are also inspected).

This document specifies the syntax, semantics, and decoding for visual volumetric media using video‑based coding methods. Furthermore, this document specifies processes that can be needed for reconstruction of visual volumetric media, and can also include additional processes such as post‑decoding, pre-reconstruction, post‑reconstruction, and adaptation.

This document provides guidance on applying the set of user accessibility needs (UANs) to the procurement, development and evaluation of ICT products and services. This includes guidance on documenting the application of user accessibility needs. Applying user accessibility needs helps improve accessibility for all users and in particular for users with special needs that might otherwise be overlooked.

This document specifies a subset of the syntax specified in Rec. ITU-T T.840.1 | ISO/IEC 6048-1 via one Main stream profile and three decoder tool subsets as three decoder profiles. It also defines higher bounds on tile and picture sizes via levels of a decoder profile that a conforming decoder implementation shall support, and specifies profiles, each being tailored to certain application domains, and defines the levels of the profiles.

This document is applicable to whole body vibration as a significant hazard. It also specifies the methods for determining the vibration emission transmitted to the whole body of drivers standing or seated on freely moveable ground support equipment (GSE) when driving, for purposes of type evaluation and declaration. This document also specifies methods for verifying vibration emission. This document is applicable to self-powered GSE only. The test results do not apply to the determination of whole body vibration exposure of persons. This document is intended to be used in conjunction with the different parts of the EN 1915 series and the EN 12312 series. This document does not apply to GSE manufactured before the date of its publication.

IEC 61995-1:2025 applies to devices for the connection of luminaires (DCL) intended for household and similar purposes, for the electrical connection of fixed luminaires of class I or class II to final circuits rated at not more than 16 A without mechanical support for the luminaires incorporated in the plug/outlet interface. The DCL retention mechanisms are not intended to support the weight of the luminaires. This second edition cancels and replaces the first edition published in 2005 and Amendment 1:2016. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) additional requirements and tests for additional suspension means; b) additional requirements and tests for additional functions; c) additional requirements and tests for floating type DCLs; d) introduction of insulation piercing terminals (IPT); e) additional classification according to the connection capacities of the DCL outlet terminals; f) modification of maximum withdrawal force for plugs with enabled locking means; g) improvements of temperature rise tests.

IEC 62541-9:2026 specifies the representation of Alarms and Conditions in the OPC Unified Architecture. Included is the Information Model representation of Alarms and Conditions in the OPC UA address space. Other aspects of alarm systems like alarm philosophy, life cycle, alarm response times, alarm types and many other details are captured in standards such as IEC 62682 and ISA 18.2. The Alarms and Conditions Information Model in this document, is designed in accordance with IEC 62682 and ISA 18.2. Annex C specifies a recommended mapping between OPC Classic Alarm & Events (A&E) servers to the model described in this document. Annex A describes recommended localized names for Alarm states. Annex B describes examples (e.g. Event sequences, Alarm areas in AddressSpace). This fourth edition cancels and replaces the third edition published in 2020. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) addition of "Comment" parameter to Alarm shelving methods; b) addition of method that allows a client to get the members of a group, since it is possible that the AddressSpace does not expose instances of alarms; c) addition of deadband properties for all limits in the limit AlarmType (from which all other types described in this issue are derived); d) addition of text explaining the disabling of alarms is no longer supported in ISA 18.2 and that it is maintained in this document for backward compatibility, but that it is recommended that Alarm not be disabled; e) addition of optional severities for limit alarms; f) addition of new AlarmState variable type that can be used to collect alarm information for displays on graphics; g) addition of SupportsFilterRetain property to improve Client filtering; h) removal of ConditionSubClassId and ConditionSubClassNames from the conditiontype definition since they are now defined in BaseEventType.

This document provides a self-assessment of an organization’s human-centred design principles, processes, and activities throughout the life cycle of computer-based interactive systems. It also provides an overview of information given in the ISO 9241-200 series of standards. It is intended to be used as an introduction and self-assessment guide to human-centred design (HCD). Its target audience is personnel responsible for and managing design processes, and it is concerned with ways in which both hardware and software components of interactive systems can enhance human–system interaction. This document does not provide detailed coverage of the methods and techniques required for human-centred design, nor does it address health or safety aspects in detail. Although it addresses the planning and management of human-centred design, it does not address all aspects of project management. NOTE Detailed human factors, ergonomics, usability and accessibility issues are dealt with more fully in a number of standards including other parts of ISO 9241 and ISO 6385, which sets out the broad principles of ergonomics.

This document establishes concepts for understanding and improving systems resilience. Systems resilience addresses the capabilities of systems under adversity. This document is applicable to human-created systems that can be either physical or conceptual, or a combination of both. It applies to systems as defined in ISO/IEC/IEEE 15288, including services and products. It is not intended to apply to naturally occurring systems.

This document describes a solution for integrating advanced process control and optimization capabilities for manufacturing systems by introducing the advanced control system of the distillation column in detail with a separate distillation column as an application case. This document is intended to be used with ISO 15746-1, ISO 15746-2 and ISO 15746-3.

This document concerns human exposure to whole-body vibration and shock in buildings with respect to the comfort and annoyance of the occupants based on both measurements and simulations. It specifies a method for measurement and evaluation, comprising the determination of the measurement direction and measurement location. It defines the frequency weighting, Wm, which is applicable in the frequency range 1 Hz to 80 Hz where the posture of an occupant does not need to be defined, see Annex A. NOTE 1 The frequency weightings given in ISO 2631-1 can be used if the posture of the occupant is defined. Whilst it is often the case that a building will be available for experimental investigation, many of the concepts contained within this document would apply equally to a building in the design process or where it will not be possible to gain access to an existing building. In these cases, reliance will have to be placed on the prediction of the building response by some means. This document does not provide guidance on the likelihood of structural damage, which is discussed in ISO 4866. Further, it is not applicable to the evaluation of effects on human health and safety. Acceptable magnitudes of vibration are not stated in this document, but guidance is provided in Annex C in the form of exposure-response curves for the estimation of annoyance when vibration originates from various sources, including railway, construction activities and blasting. NOTE 2 The exposure-response curves are based on the most recent evidence which suggests that human response to vibration in buildings is dependent on the magnitude, frequency, duration and temporal characteristics of the vibration[4]. In addition, it is known that other factors not directly related to the vibration characteristics have a significant influence on the annoyance response. These are identified in Annex B and include consideration of some parallel effects, subjective impressions and socio-demographic factors which need to be accounted for when collecting vibration data. NOTE 3 Several national standards have been proposed to define methods for assessing exposure to vibration in buildings as well as reference values for judging the annoyance resulting from exposure. These standards generally present significant differences in terms of metrics and methods used to quantify exposure as well as on the guideline values to prevent adverse effects. Some standards define limit values that are based on experimental field data leading to exposure-response relationships such as those proposed in Annex C. Other standards base their limit values on estimations that take into account vibration perception thresholds and situational factors. Some standards also consider the magnitude of vibration that can present a risk of damage to the buildings, particularly when blasting is involved.

This document provides information on the design of geosynthetics for surface erosion control on slopes and river or channel banks. It does not apply to the design of geosynthetics for the stability of slopes and river or channel banks. It does not apply to coastal protection issues.

This document provides test methods for determining air tightness and separation performance (permeation and salt rejection) of reverse osmosis (RO) and nanofiltration (NF) membrane elements.

This document provides requirements and guidance on common competence requirements and qualifications for crewed submersible operations to enable operators to develop their own competence schemes. It is applicable to any crewed submersible system (CSS) or craft. Conventional and nuclear powered naval submarines, and diving bells are not addressed in this document.

This document establishes principles, specifies requirements and gives guidance on self-declared environmental claims about products and their environmental statement programmes, including claims that also cover related social and economic aspects that are affected by environmental conditions or the environmental performance of a product. This document defines selected terms commonly used in self-declared environmental claims and provides qualifications for their use, as well as describing the documentation and methodologies required for assessing self-declared environmental claims. This document is applicable to self-declared environmental claims that predominantly take the form of words, but can also be symbols or graphics on product or package labels, or appear in product literature, technical bulletins, advertising and publicity, including on digital platforms.

This document provides requirements for demonstrating that the site in question is adequate to provide safe, long-term containment of CO2, for demonstrating that the CO2 flood is operated in a way to assure containment of the CO2 in the EOR complex, and for quantifying associated storage. This document applies to CO2 that is injected in enhanced recovery operations for oil and other hydrocarbons, including natural gas, (CO2-EOR) for which quantification of CO2 that is safely stored long-term in association with the CO2-EOR project is sought. Recognizing that some CO2-EOR projects use non-anthropogenic CO2 in combination with anthropogenic CO2, the document also shows how allocation ratios can be utilized for optional calculations to quantify the portion of associated storage comprised of anthropogenic CO2 (see Annex A). This document does not apply to quantification of CO2 injected into reservoirs where no hydrocarbon production is anticipated or occurring. Storage of CO2 in geologic formations that do not contain hydrocarbons is covered by ISO 27914 even if located above or below hydrocarbon producing reservoirs. If storage of CO2 is conducted in a reservoir from which hydrocarbons were previously produced but will no longer be produced in paying or commercial quantities, such storage would be subject to the requirements of ISO 27914. This document addresses: safe, long-term containment of CO2 within the EOR complex; CO2 leakage from the EOR complex through leakage pathways; and on-site CO2-EOR project loss of CO2 from wells, equipment, or other facilities. This document does not address the following: lifecycle emissions, including but not limited to CO2 emissions from capture or transportation of CO2, on-site emissions from combustion or power generation, and CO2 emissions resulting from the combustion of produced hydrocarbons; storage of CO2 above ground; buffer and seasonal storage of CO2 below ground (similar to natural gas storage); )any technique or product that does not involve injection of CO2 into the subsurface; and emissions of any greenhouse gases (GHGs) other than CO2. NOTE Some authorities can require other GHG components of the CO2 stream to be quantified.

This document specifies the methods, parameter sets and models to develop and utilize a data package for a part created using AM technologies (AM part). This document is applicable to the information requirements associated with workflow of the fabrication of an AM part, from design to acceptance. Peripheral information related to entities such as organization, facility, operator, security, and others is addressed for sake of completeness; but is not the focus of this document and can be defined elsewhere. This document provides the means to develop an organizational or application-specific data package for the communication between and amongst the designer, the manufacturer, and all acceptance authorities, among other potential stakeholders. This document does not impose a plan of execution to produce an AM part, though a digital thread is provided to establish a referenceable information workflow. The requirements set forth in this document are based on the fabrication of a part using the PBF-LB/M (powder bed fusion-laser based/metal) process. While specific details directly relate to PBF-LB/M, generalized workflow requirements can be related to any AM process.

This document specifies the dimensions of fixed or rotatable bolted knife-edge flanges used in vacuum systems for pressures ranging from atmospheric to as low as 10−11 Pa.

This document specifies principles and requirements and gives guidance on environmental product declaration (EPD) programmes and their associated EPDs. This document specifies the use of ISO 14040 and ISO 14044 on life cycle assessment (LCA) in the development of EPDs. This document is applicable to EPD programmes and their associated EPDs that are intended to address the potential environmental impacts and environmental aspects of products, and which can also include related social and economic aspects in support of sustainable development. NOTE 1 This document does not deal with social or economic LCA indicators. NOTE 2 Related social and economic aspects of the products can be reported as additional sustainability-related information, where relevant and available. This document provides requirements and guidance for the communication of the potential environmental impacts and environmental aspects of products to the intended audience of the EPD. This document does not apply to sector-specific provisions, which are dealt with in other ISO documents. It is intended that sector-specific provisions in other ISO documents related to EPDs are based on and use the principles, requirements and guidance of this document.

This document provides an overview of the metadata element sets, developed in different countries and by different organizations according to the ISO 23081 series of standards.

IEC 60800:2021 is applicable to, and specifies requirements for resistive heating cables for low temperature applications such as comfort heating and the prevention of ice formation. These heating cables and heating cable sets can comprise either factory assembled or field (work-site) assembled units, and are heating cables assembled in accordance with manufacturer’s instructions. Bare conductors and protected conductors to be supplied at voltages equal to, or less than, 50 V are excluded from the scope of this document.
Typical applications include, but are not limited to:
- surface heating installed in or under surfaces;
- direct and storage heating;
- snow melting and frost protection of roofs, gutters, pipes, etc.
Electrical resistance trace heating systems for industrial and commercial applications are specified in the IEC 62395 series [1] and for explosive atmospheres applications in the IEC/IEEE 60079-30 series [2], as are mineral insulated heating cables. Applications in which the sheath temperature exceeds 100 °C are outside the scope of this document.

This document specifies methods for determining the compressive strength, the corresponding compressive strain, the compressive stress at 10 % nominal compressive strain, and the compressive modulus of rigid cellular plastics. Two procedures are specified. Procedure A and Procedure B. Procedure A utilizes the compression plate displacement for the nominal property determination. It is used to determine: compressive strength and the corresponding nominal compressive strain; compressive stress at 10 % nominal compressive strain; nominal compressive modulus. Procedure B uses an extensometer and determines the conventional properties. It is used to determine: compressive strength and the corresponding compressive strain; compressive modulus.

This document specifies how a digital thread enables the creation, connectivity, management, and maintenance of manufacturing digital twins across the product life cycle, including design, planning, production, and testing by defining principles, presenting methodologies, and providing use case examples.

This document is applicable to products that emit laser radiation for the purpose of free space optical data transmission.
This document does not apply to laser products designed for the purposes of transmitting optical power for applications such as material processing or medical treatment. This document also does not apply to the use of laser products in explosive atmospheres (see IEC 60079-0). Light-emitting diodes employed by free space optical communication systems, used for the purpose of free space optical data transmission, do not fall into the scope of this document.
NOTE If the laser product incorporates an optical fibre that extends from the confinements of the enclosure, the requirements in IEC 60825-2 applies.

IEC 62321-13:2026 specifies three techniques for the determination of free Bisphenol A (BPA) in plastics of electrotechnical products.
This document describes the use of liquid chromatography–diode array detector (LC-DAD), liquid chromatography mass spectrometry (LC-MS), liquid chromatography tandem mass spectrometry (LC-MS/MS) with these test methods detailed in Annex A and Annex B.
These test methods have been evaluated for use with PC, PC/ABS, PP matrices containing free BPA between 20 mg/kg to 500 mg/kg as shown in the Pre-IIS 13 results in Annex C and IIS 13 results in Annex D. The use of these methods for BPA concentration ranges of plastics, other than those specified in Annex C and Annex D, has not been evaluated.
WARNING – Persons using this document should be familiar with normal laboratory practice. This document does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user to establish appropriate safety and health practices and to ensure compliance with any national regulatory conditions.

This document specifies the standard for the digital exchange of data between the disposition (i.e. registered Office) and the mobile waste and recycling collection units (revolving emptying system according to the EN 840 series and the EN 13071 series and refuse collection vehicles according to the EN 1501 series).
The technique of data transmission is not part of this document.

IEC 61753-021-03:2026 defines minimum initial test and measurement requirements and severities which single-mode fibre optic connectors terminated as a pigtail or a patchcord satisfy in order to be categorized as meeting the IEC standard category OP (outdoor protected environment), as defined in IEC 61753-1. If tests are performed on the connectors terminated as pigtails or patchcords for category OPHD, OP+ or OP+HD and the product passes these tests, the product will be automatically qualified or categorized as meeting the IEC standard for category OP. If tests are performed on the connectors terminated as pigtails or patchcords for category OP, and the product passes these tests, the product will be automatically qualified or categorized as meeting the IEC standard for category C or CHD.
This first edition cancels and replaces the first edition of IEC 61753-021-3 published in 2012.
This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) update of environmental categories (from U to OP), tests and their severities in accordance with IEC 61753‑1;
b) changes in the terms and definitions of the different types of test samples (pigtail test samples and patchcord test samples) used in the various tests to avoid confusion;
c) update of fibre naming conventions in accordance with IEC 60793‑2‑50 and addition of provisions for B‑657 fibres;
d) addition of all the attenuation and return loss grades defined in IEC 61753‑1;
e) deletion of the static side load test;
f) addition of provisions for rectangular ferrule connectors;
g) addition of the fibre optic connector proof test with static load – side pull;
h) update of the flexing of the strain relief test to use change of attenuation instead of transient loss;
i) addition of Annex B for visual examination of the outer cable sheath movement of reinforced cables as an additional requirement for change of temperature, cable retention and flexing of the strain relief tests.

This document specifies optical and non-optical requirements and the test methods for anti-reflective and hydrophobic properties of coatings on spectacle lenses. This document does not apply to the following topics: requirements and test methods incorporated in other ISO 8980 series standards; the colour of the reflected light.

This document specifies the method of verification and calibration of testing machines for carrying out the instrumented indentation test in accordance with ISO 14577-1. It specifies a direct verification method for verifying and calibrating the main functions of the testing machine and an indirect verification method suitable for the determination of the repeatability of the testing machine. The methods in ISO 14577 are applicable to all systems that comply with the requirements of this part of ISO 14577.

This document defines technical criteria and control procedures which are satisfied by hollow sleepers and bearers used in ballasted track with Vignole rails. The hollow sleepers and bearers designed for ballasted track can also be used in ballastless track. In this case, the requirements are defined by the customer.

This document specifies methods for measuring the parameters needed to calculate arc energies for arc welding processes.

2022-01-05:: This prAA includes common mods to EN IEC 62841-3-3 (PR=75427)
DOW=DOR+48 months is applied to all parts in EN IEC 62841 series

This document is applicable to positive displacement refrigerant compressors for stationary and mobile refrigerating systems and heat pumps, hereafter called compressors.
It is applicable for compressors used in commercial and industrial appliances and with electrical energy supply including integral motors, up to 1 000 VAC and 1 500 VDC.
It is applicable to open drive, semi hermetic and hermetic motor compressors, which contain a positive compression function.
This document is not applicable to:
-   compressors used in household appliance for which EN IEC 60335-2-34 applies;
-   compressors using water or air as refrigerant;
-   compressors in vehicle air conditioning systems covered by a specific product standard, e.g. ISO 13043.
This document does not deal with requirements for emission of noise.
NOTE 1   Compressors for automotive comfort air conditioning systems can be developed according e.g. SAE J 639.
NOTE 2   Noise emission depends on the complete installation of the built-in compressors and the corresponding operating conditions.
For semi-hermetic and open drive compressors which include moving parts and for which the external envelope is primarily designed for mechanical loads, thermal loads (to limit the possible deformation due to temperature), stiffness of the structure (external mechanical loads and weight of the equipment), taking into account established safe industrial practice, it is considered that pressure is not a significant design factor.
Attached parts covering other functions e.g. oil separators, oil coolers, suction accumulators comply to EN 14276-1 or EN 13445-6 (cast iron) or EN 13445-8 (aluminium) or show compliance to the relevant European requirements. This is applicable also to shells for hermetic compressors either welded or with any kind of permanent joint.
Requirements for compressors used in explosive atmospheres are not covered by this document.
NOTE 3   For further guidance see EN 1127-1.
This document deals with significant hazards, hazardous situations and events relevant to compressors, when they are used as intended and under conditions for misuse which are reasonably foreseeable by the manufacturer (see Clause 4).
This document specifies safety requirements for the design, construction, manufacture and testing, documentation and marking of compressors, including integral accessories, e.g. shut-off valve, if necessary.
This document relates to the compressor itself which is to be incorporated in a refrigerating system.
This document is not applicable to compressors as specified in the scope which are manufactured before the date of publication.

IEC 60794-1-126:2026 defines the test procedures used to establish uniform requirements for mechanical performance - galloping. It applies to optical fibre cables like ADSS, OPGW or OPPC that can be exposed to galloping phenomena. See IEC 60794-1-2 for general requirements and definitions and for a complete reference guide to test methods of all types. This first edition cancels and replaces Method E26 of the first edition of IEC 60794‑1‑21 published in 2015. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) Addition of "for ADSS" and "for OPGW and OPPC" in 4.7, a);
b) Addition of "L4" in Figure 1 and in 4.7, b);
c) Change of the specified static sag angle to ≤ 1,5±0,5°;
d) Improvement of Figure 1;

IEC 61760-1:2026 defines requirements for component specifications of electronic components that are intended for usage in surface mounting technology. To this end, it specifies a reference set of process conditions and related test conditions to be considered when compiling component specifications. The objective of this document is to ensure that a wide variety of SMDs can be subjected to the same placement, mounting and subsequent processes (e.g. cleaning, inspection) during assembly. This document defines tests and requirements that are included in any SMD component’s general, sectional or detail specification. In addition, this document provides component users and manufacturers with a reference set of typical process conditions used in surface mounting technology. Some of the requirements for component specifications in this document are also applicable to components with leads intended for mounting on a circuit board, including solderless interconnection technology. Cases for which this is appropriate are indicated in the relevant subclauses.
NOTE Solderless interconnection technology refers to a mounting method which is not part of the surface-mounting process and the components do not undergo a soldering operation. Such components are included in this document because the mounting of components for solderless interconnection commonly occurs after the mounting of SMDs.
This edition includes the following significant technical changes with respect to the previous edition:
a) added new subclause 4.2 - Classification of electronic assemblies;
b) added new subclause 4.4.8 - Creepage and clearance distances - Insulation coordination;
c) added new subclause 4.9 - Thermal and electrical performance;
d) updated Clause 6 - Soldering: now including requirements related to application of low temperature solders;
e) added new subclause 6.2.2 - Commonly used solder alloys;
f) updated subclause 6.3.6 - Resistance to vacuum during soldering;
g) updated subclause 6.3.7 - Resistance to cleaning media and processes - now includes the tests in IEC 60068-2-88, Tests - Test XD: Resistance of components and assemblies to liquid cleaning media;
h) added new subclause 6.3.9 - Rework of soldered components;
i) added new Annex B - Sustainability.

This document applies the various details and case studies from ISO 16355-1 through ISO/TR 16355-8 to a unified case study based on public information available from a food and beverage case study.[1] By reframing the different case studies into a single story, the relationships and information flows of QFD are more easily followed. This document briefly explains how the methods and tools of QFD and associated methods might work in this food and beverage study. Detailed steps are found in the ISO 16355 series as referenced in this document and readers are able to use these when implementing QFD. Users of this document include all organization functions necessary to assure customer satisfaction, including business planning, marketing, sales, research and development (R&D), engineering, information technology (IT), manufacturing, procurement, quality, production, service, packaging and logistics, support, testing, regulatory, and other phases in hardware, software, service, and system organizations.