ISO - International Organization for Standardization

This document contains selected examples for good practice approaches for the management of assets of wastewater systems. This document is intended as a supporting document for ISO 24516-3 and ISO 24516-4, which contain guidelines for the management of assets of wastewater systems. As such, this document can contribute to realize value from existing assets when following the guidelines for the management of assets of wastewater systems approaches in the strategic, tactical and operational plans given in ISO 24516-3 and ISO 24516-4. NOTE A recapitulative table of the examples covered in this document is provided in Annex A.

This document establishes the currently recognized approaches and special considerations needed when evaluating the in vitro and in vivo performance of absorbable metals and implants fabricated, in whole or in part, from them. This document describes how the evaluation of these metals can differ from those utilized for permanent non-absorbable implantable implants (or subcomponents), in that absorbable metal implants (or subcomponents) are – by design – intended to be absorbed in their entirety by the host. This document provides guidance regarding the materials considerations, in vitro degradation/fatigue characterization, and biological evaluation of medical implants made of absorbable metals. The provided content is intended to deliver added clarity to the evaluation of these materials and implants to increase awareness of critical factors and reduce potential for generation of erroneous or misleading test results. While this document and the herein described referenced standards contain many suggested alterations or modifications to currently practiced procedures or specifications, the provided content is intended to complement, and not replace, current conventions regarding the assessment of implantable implants. This document covers the evaluation of absorbable metal specific attributes in general and is not intended to cover application or implant specific considerations. Thus, it is important to consult relevant implant and/or application specific standards. This document does not apply to non-absorbable or non-metallic components (e.g. polymeric coatings, pharmaceuticals, non-absorbable metals) used in conjunction with absorbable metal implants.

This document provides recommendations, requirements and checklists which can be used to support the specification and field testing of cryptographic modules in their field within an organization’s security system. The cryptographic modules have an overall security rating commensurate with the four security levels defined in ISO/IEC 19790:2025, to provide for: — a wide spectrum of data sensitivity (e.g. low-value administrative data, million-dollar funds transfers, life-protecting data, personal identity information, and sensitive information used by government), and — a diversity of application environments (e.g. a guarded facility, an office, removable media, and a completely unprotected location). This document is limited to the security related to the cryptographic module. It does not include assessing the security of the field or application environment. It does not define techniques for the identification, assessment and acceptance of the organization’s operational risk. This document applies to the field testers who perform the field testing for the cryptographic modules in their field and the authorizing officials of cryptographic modules.

This document specifies a test method for determining the fire resistance of various elements of construction when subjected to fire exposure conditions, represented with standardized time-temperature curves. The test data thus obtained will permit subsequent classification on the basis of the duration for which the performance of the tested elements under these conditions satisfies specified criteria.

This document establishes conformance testing for the requirement described in ISO/IEC 24787-2, which is: — work-sharing on-card biometric comparison. Measuring the performance of on-card biometric comparison algorithms such as error rates or speed is not within the scope of this document.

This document specifies a procedure for the determination of a rating of the source flow ripple, source impedance and pressure ripple levels generated by positive-displacement hydraulic motors, including bidirectional motors. This document is applicable to all types of positive-displacement motor operating under steady-state conditions, irrespective of size, for frequencies from 50 Hz to 3 500 Hz. It is applicable for the inlet port of positive-displacement motors.

This document specifies the requirements for archival paper. It is applicable to unprinted papers intended for documents and publications required for permanent retention and frequent use. For these documents and publications, paper of high permanence and high durability is required. NOTE 1 Archival paper is primarily required for documents and publications intended to be kept permanently because of their high historical, legal or other significant value. Archival paper is for special purposes, not for common use. The use of the term “archival paper” does not imply that all papers kept in archives are “archival papers”. NOTE 2 For relationships between International Standards on paper permanence (ISO 9706), on archival paper permanence and durability (ISO 11108), and on paper stability for general graphic applications (ISO 20494), refer to Annex B.

This document provides information regarding the measurement and evaluation of the mechanical vibration of wind turbines and their components. The working principles of wind turbines covered by this document are described in Annex B. The installation site and type of mechanical drive train of the wind turbine influence the vibration magnitude, so for the purposes of this document wind turbines have been divided into two groups: a) Group 1: Horizontal axis wind turbine installations with generators coupled to the rotor via a gearbox; and b) Group 2: Horizontal axis wind turbine installations with generators coupled to the rotor without a gearbox (direct drive wind turbines). The requirements of this document apply to both Group 1 and Group 2 wind turbines with a rated generator output exceeding 200 kW. This document recommends zones for evaluating the vibration at continuous load operation. However, in most cases these evaluation zone boundaries are not suitable for the early detection of faults. Annex A presents evaluation zone boundaries based on vibration data collected from thousands of wind turbines with rated generator outputs of 5 MW or less, which can be helpful in facilitating discussion between users and manufacturers when considering early fault detection. The evaluation criteria described in this document serve to ensure safe, reliable, long-term operation of the wind turbine and its components. It is intended to standardize the vibration measurements taken, to assist in their evaluation and to facilitate a comparative evaluation of the vibration measured in wind turbines and their components. In addition, recommendations are given for the determination of operational vibration limit values. The type and implementation of broad-band vibration monitoring methods to be used for wind turbines are addressed in this document, along with evaluation criteria for assessing vibration severity. This document does not address diagnosis or fault detection, although the measurement equipment described can be used for vibration monitoring. NOTE 1 For information regarding vibration condition monitoring see the ISO 13373 series. For Information regarding condition monitoring and diagnostics of wind turbines see the ISO 16079 series. NOTE 2 IEC 61400-13 describes load measurements that can be taken using strain gauges mounted on the wind turbine support structure and blades. For procedures to assist the detection of rolling bearing and gearbox defects see ISO 13373-2. For the measurement and evaluation of structure-borne noise in wind turbines fitted with rolling bearings see VDI 3832. NOTE 3 Evaluation of the unbalance of the slowly turning wind turbine rotor requires the use of measurement techniques and analysis which consider both mass and aerodynamic unbalance. To assess the influence of the rotor unbalance on vibrations see VDI 3834-1:2015-08, Annex B. The requirements described in this document do not apply to the acceptance measurements for wind turbine gearboxes and generators taken in the manufacturer’s test facility. NOTE 4 Acceptance measurements for wind turbine gearboxes and generators, taken in the manufacturers test facility, are assessed as described in ISO 20816-9 and/or IEC 60034-14. This document does not provide evaluation zones for vibration measurements taken on rotating parts (shaft relative displacement) due to the small number of turbines on which such measurements are/have been taken.

This document specifies the requirements for permanent paper intended for documents. It is applicable to unprinted papers. It is not applicable to boards. NOTE 1 The terms paper and board are defined in ISO 4046-3. This document is not intended for judging the permanence of papers stored under hostile conditions, such as high humidity that can promote microbiological attack, excessive heat, radiation (light or other), high levels of atmospheric pollutants, or the influence of water. NOTE 2 For information on International Standards on paper permanence (ISO 9706), on archival paper permanence and durability (ISO 11108), and on paper stability for general graphic applications (ISO 20494), refer to Annex D.

This document specifies a method for the determination of the temperatures and enthalpies of melting and crystallization of crystalline or partially crystalline plastics using conventional DSC as specified in ISO 11357-1. This document is not applicable to fast DSC as specified in ISO 23976.

This document specifies a method of determining the mass fraction of acetone-soluble material (“resinous substance”) in the benzene-soluble extract from brown coals and lignites. NOTE The acetone extract also contains a mass fraction of wax dissolved simultaneously with the "resinous substance".

This document: — describes and specifies globally unique addresses and identifiers (ITS-S object identifiers) that are both internal and external to ITS stations and are used for ITS station management; — describes how ITS-S object identifiers and related technical parameters are used for classification, registration and management of ITS applications and ITS application classes; — describes how ITS-S object identifiers are used in the ITS communication protocol stack; — introduces an organizational framework for registration and management of ITS-S objects; — defines and specifies management procedures at a high functional level; — specifies an ASN.1 module for the identifiers, addresses and registry records identified in this document; and — specifies an ASN.1 module for a C-ITS data dictionary containing ASN.1 type definitions of general interest. This document is based on the architecture of an ITS station specified in ISO 21217 as a bounded secured managed domain (BSMD).

This document augments the capabilities of the mobile driving licence (mDL) standardized in ISO/IEC 18013-5 with the following additional functionality: — presentation of a mobile driving licence to a reader over the internet.

This document specifies the rules for indicating centring and tilt tolerances for optical elements, subassemblies, and assemblies in the ISO 10110 series, which standardizes drawing indications for optical elements and systems. This document applies to plano surfaces, rotationally invariant (spherical and aspherical) surfaces, circular and non-circular cylindrical (cylindrical and acylindrical) surfaces, and non-symmetrical surfaces (general surfaces). General surfaces are described using ISO 10110-19.

This document provides guidance for organizations for the development, implementation and maintenance of an effective fraud control management system (FCMS). This includes fraud prevention, early detection of fraud and effective response to fraud events that have occurred or can occur in the future. The document provides guidance for managing the risk of fraud, including: a) internal fraud against the organization; b) external fraud against the organization; c) internal fraud in collaboration with business associates or other third parties; d) external fraud in collaboration with the organization’s personnel; e) fraud by the organization or by persons purporting to act on behalf of and in the interests of the organization. This document is applicable to all organizations, regardless of type, size, nature of activity and whether in the public or private, profit or not-for-profit sectors. It is not intended to assist consumers in preventing, detecting or responding to what is generally termed "consumer fraud".

This document: — defines a reference land administration domain model (LADM) covering basic information-related components of land registration (including elements above and below the surface of the Earth); — provides an abstract, conceptual model with three packages and one sub-package related to: — parties (people and organizations); — basic administrative units, rights, responsibilities and restrictions (RRRs); — spatial units (parcels, and the legal space of buildings and utility networks and other geometry) with a sub-package on surveying and spatial representation (geometry and topology); — provides terminology for land administration (LA), based on various national and international systems, that is as simple as possible in order to be useful in practice. The terminology allows a shared description of different formal or informal practices and procedures in various jurisdictions; — provides a platform for comparison and monitoring that is based on indicators; — provides a basis for national and regional profiles; and — enables the combination of land administration information from different sources in a coherent manner. The following is outside the scope of this document: — interference with (national) land administration laws with potentially legal implications; and — construction of external databases with party data, address data, land cover data, physical utility network data, archive data and taxation data. However, the LADM provides stereotype classes for these data sets to indicate which data set elements the LADM expects from these external sources, if available. This document provides the concepts and the detailed structure for standardization in the land administration domain.

This document specifies a test method for the determination of puncture impact properties of a plastic film using instruments for measuring force and deflection. It is applicable if a force-deflection or force-time diagram, recorded at nominally constant striker velocity, is required for detailed characterization of the impact behaviour. This test method is also used when a small number of test specimens are available, and the staircase method described in the ISO 7765-1 cannot be applied. The test method is applicable to films of up to 1 mm thickness and makes it possible to compare impact-penetration forces, biaxial deformabilities and energy-absorption capacities of films. Also, the transition region between brittle and tough behaviour of the film under the conditions of testing can be determined by varying the temperature or the penetration velocity or the relative humidity.[ REF Reference_ref_7 \r \h 4 08D0C9EA79F9BACE118C8200AA004BA90B0200000008000000100000005200650066006500720065006E00630065005F007200650066005F0037000000 ]

This document specifies a method for determining the scratch properties of plastics under defined conditions. The method defined in this document is used to investigate the behaviour of specified types of specimens under the scratch conditions defined and for classifying the type of scratch of specimens within the limitations inherent in the test conditions. It can also be used to determine comparative data for different types of material by means of a so-called scratch map in which the types of scratch behaviour for each set of test conditions of test load and test speed are determined using the basic method of constant-load testing, and also by means of the so-called critical normal load determined using an alternative method of linearly increasing load testing. The method is suitable for use with the following range of materials. — thermoplastic moulding, extrusion and casting materials, including filled and reinforced compounds in addition to unfilled types; — thermosetting moulding materials, including filled and reinforced compounds; — thermosetting sheets, rigid thermoplastic moulding and extrusion materials, including filled and reinforced compounds in addition to unfilled types. The method specifies the preferred dimensions for the test specimen and the preferred scratch-tip geometry.

This document establishes conformance testing for the requirements described in ISO/IEC 24787-1, which are: — framework for on-card biometric comparison, both in sensor-off-card systems and as part of Biometric System-on-Card; — security policies for on-card biometric comparison. Measuring the performance of on-card biometric comparison algorithms such as error rates or speed is not within the scope of this document.

This document specifies the conformance test for the electrical physical layer (EPL) of the LIN communications system. The purpose of this document is to provide a standardised way to verify whether a LIN bus driver conforms to ISO 17987-4. The primary motivation is to ensure a level of interoperability of LIN bus drivers from different sources in a system environment. This document provides all the necessary technical information to ensure that test results are consistent even on different test systems, provided that the particular test suite and the test system are conformant to the content of this document.

This document provides guidance for organizations performing artificial intelligence (AI) system impact assessments for individuals and societies that can be affected by an AI system and its foreseeable applications. It includes considerations for how and when to perform such assessments and at what stages of the AI system life cycle, as well as guidance for AI system impact assessment documentation. Additionally, this guidance includes how this AI system impact assessment process can be integrated into an organization’s AI risk management and AI management system. This document is intended for use by organizations developing, providing or using AI systems. This document is applicable to any organization, regardless of size, type and nature.

This document deals with the technical requirements and the means for their verification for additive manufacturing (AM) machines using a bed of metallic powder, pyrophoric feedstock excluded, and a laser herein designated as machine. This document deals with all significant hazards, hazardous situations or hazardous events during all phases of the life of the machine (ISO 12100:2010, 5.4), as listed in Annex A, caused by AM machines using a bed of metallic powder and a laser when used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer. This document does not deal with hazards which can occur: — during the design and construction phase of the laser beam powder ped fusion (PBF-LB) machine itself; — operating in potentially explosive atmospheres. This document does not apply to technologies other than AM metals PBF-LB. This document is not applicable to machines manufactured before the date of its publication.

This document provides guidance and requirements for the management of on-site domestic wastewater systems and services, using appropriate technologies in their entirety at any level of development. This document supplements and is intended to be used in conjunction with ISO 24511 and ISO 24525. It includes guidance and requirements for the following: — management of on-site domestic wastewater systems and services from the operator’s perspective, including maintenance techniques, training of personnel and risk considerations; — management of on-site domestic wastewater systems (ODWS) from the perspective of owners and users; — design and construction of ODWS; — planning, operation and maintenance, and health and safety issues. This document is applicable to both publicly and privately operated on-site domestic wastewater (black and grey water) services, for one or more dwellings. In rural areas and areas under development, management is sometimes provided by the owners of the premises where wastewater is generated. In this document the term “services” includes “self-services” provided by the owners of the premises. The following are outside the scope of this document: — limits of effluent quality for wastewater discharged into the environment; — analytical methods; — stormwater runoff; — content of contracts or subcontracts.

This document provides quality requirements for producing a quality map between terminological systems. This document establishes measures which can be used to assess the quality and utility of a map between terminological resources. These measures can be used to determine the types and conformance levels of a map and their impact on common use cases in healthcare.

This document provides three examples of the use of reaction-to-fire test data for fire safety engineering (FSE).

Within the context of training data for Earth Observation (EO) Artificial Intelligence Machine Learning (AI/ML), this document specifies a conceptual model that: — establishes a UML model with a target of maximizing the interoperability and usability of EO imagery training data; — specifies different AI/ML tasks and labels in EO in terms of supervised learning, including scene level, object level and pixel level tasks; — describes the permanent identifier, version, licence, training data size, measurement or imagery used for annotation; — specifies a description of quality (e.g. training data errors, training data representativeness, quality measures) and provenance (e.g. agents who perform the labelling, labelling procedure).

IEC/ISO dual logo IEC 82474-1:2025 specifies the requirements and guidance for the content, format and exchange relating to material declarations for products. The main intended use of this document is to provide data up and down the supply chain that: - allows organizations to assess products against material and substance requirements, - allows organizations to assess process chemical substances used in manufacturing and other stages of the product life, - allows organizations to use this information in their activities related to environmentally conscious design process and across all product life cycle stages, - allows organisations to obtain information about material efficiency and circularity of their products. This document specifies mandatory declaration requirements and also provides optional declaration requirements. This document does not suggest any specific software solution to capture material declaration data in the supply chain. However, it provides a data format used to transfer information within the supply chain. Organizations can determine the most appropriate method to capture material declaration data without compromising data utility and quality. This document is intended to allow declaration based on engineering judgement, responder (supplier) material declarations, and/or sampling and testing. This document has the status of a horizontal publication in accordance with IEC Guide 123. This edition includes the following technical changes with respect to IEC 62474:2018 (edition 2): a) Definitions were sharpened to fulfil needs from sectors other than electrical and electronic products and systems and new terms have been added that support new topics introduced such as webservice methods, material efficiency and circularity, and new reference list types. b) A new subclause (4.6) covering process chemical declaration was included. This subclause covers requirements related to the information required about process chemical substances, the applicable processes where they are used, and the respective product life cycle phase(s). c) A new clause (8) covering web services on material declaration was included. This clause covers requirements related to topics such as machine-machine communication, authentication service, and data representation. d) Requirements and guidance for the development of reference lists such as query list (QL), and application/exemption lists (AL/EL) were included. This document has been given the status of a horizontal document in accordance with ISO/IEC Directives, Part 1. It is published as a double logo standard.

This document defines terms used in digital imaging.

This document uses a set of models that describe the flows of different types of data between distributed ledger technologies (DLT) and related systems, as well as between different DLT nodes. It provides a descriptive analysis of data flows in the development of use cases, as well as the basis for understanding the characteristics of DLT data flows, to support DLT application design and system analysis. The models referenced are in accordance with ISO 23257 and the use case analysis approach provided in ISO/TR 3242.

This document specifies requirements for the equipment needed for simultaneous interpreting and for the quality of sound and image transmitted to interpreters and from interpreters to the audience, irrespective of the place in relation to speakers, signers, the audience and other interpreters.

This document specifies test methods to evaluate the behaviour of a vehicle equipped with an acceleration control pedal error (ACPE) system according to ISO/PAS 19486. Those forward and reverse accidents occur during a straight-line acceleration when the vehicle under test (VUT) accelerates due to driver misapplication of accelerator pedal instead of intended brake pedal. This document is limited to ACPE systems of light vehicles only classified in UN-ECE (TRANS/WP.29/1045) Vehicle: “Category 1-1 vehicle” and does not apply to such devices installed in vehicles of other categories, such as heavy vehicles or motorcycles. This document focuses on an important part of the vehicle behaviour during these collision scenarios, which is the capacity to avoid or mitigate the collision especially to the other vehicle.

This document specifies requirements for the establishment of an operations control programme (OCP) to ensure efficient cleanroom operation within specified cleanliness levels. The OCP includes management of personnel, entry and exit of personnel and materials, cleaning, maintenance and monitoring. This document specifies operational requirements that relate to: — providing a system that specifies policies and operational procedures for maintaining cleanliness levels; — training of personnel; — transferring, installing and maintaining stationary equipment; — transferring material and portable equipment into and out of the cleanroom; — maintaining a personnel management programme that includes a gowning programme; — maintaining a cleaning programme that addresses special cleaning; — maintaining a cleanroom maintenance programme; — establishing an appropriate monitoring programme. This document gives additional information in annexes for: — personnel management; — gowning; — training; — cleaning. This document does not specifically address biocontamination control. For details on this topic, see ISO 14698-1 and ISO 14698-2. This document does not apply to the following topics: — aspects of health and safety management that have no direct bearing on contamination control; — specific requirements for individual industries; — specific requirements for equipment and materials used or associated with processes and products; — design details of equipment; — cleaning agent compatibility with cleanroom materials.

This document specifies requirements and test methods for acid-base, dental cements intended for permanent cementation, lining and restoration. This document is not intended to address resin-modified water-based cements. This document is applicable to both hand-mixed and encapsulated cements for mechanical mixing. This document specifies limits for each of the properties according to whether the cement is intended for use as a luting agent, base or liner, restorative material or pit and fissure sealing cement.

This document defines the most commonly used terms for transmission electron microscopy (TEM) specimen preparation using focused ion beam (FIB).

This document specifies test methods which are intended to determine the fogging characteristics of polyvinyl chloride (PVC) or polyurethane textiles that are used as trim materials in the interior of motor vehicles. The methods can also be applied to fluid, paste, powdered or solid raw materials which are the basis for such trim materials or from which the materials are manufactured. The methods can also be applied to other materials and finished products. The procedures are applicable to the measurement of fog condensate on glass surfaces within the limits of the test conditions. These tests do not or cannot measure accurately those cases in which: — the surface tension of the condensate is low, resulting in early coalescing into a thin transparent film; — the condensate is present in such a large quantity that the droplets coalesce and form a heavy oily/clear film (this heavy film gives false readings). NOTE In such cases, the gravimetric method is used.

This document specifies the characteristics and quality assurance requirements for MJ thread bolts made of alloy steel, of strength class 1 100 MPa, for aerospace construction. It is applicable whenever it is referenced in a definition document.

This document specifies a method for measuring workers’ exposure to noise in a working environment and calculating the noise exposure level. This document deals with A-weighted levels but is applicable also to C-weighted levels. Three different strategies for measurement are specified. The method is applicable for detailed noise exposure studies or epidemiological studies of hearing damage or other adverse effects. The measuring process requires observation and analysis of the noise exposure conditions so that the quality of the measurements can be controlled. This document provides methods for estimating the uncertainty of the results. This document is not intended for assessment of masking of oral communication or assessment of infrasound, ultrasound and non-auditory effects of noise. It does not apply to the measurement of the noise exposure of the ear when hearing protectors are worn. Results of the measurements performed in accordance with this document can provide useful information when defining priorities for noise control measures.

This document provides: — an appraisal framework for datasets and data processing methods that create and use urban management information derived from statistics, objectives, indicators and long-term goals for sustainable development of cities and communities; — numerous combinations of data sources and data processing methods, making it easier to create and maintain urban management information and get ready for value mining of big data within cities and communities; — approaches to appraise the necessary data to generate management information in an organization and how to classify them into different categories for regular review and update over time; — functional requirements to support the design, daily operation and management of information systems. This document is designed to be compatible with artificial intelligence (AI) systems. It helps cities and communities prepare for the application of AI in digital fields towards sustainable development. This includes the adoption of AI systems to process and analyse data collected from various sources. The goal is to identify and solve problems that cities and communities face to aid decision-making and achieve the six sustainability purposes as provided in ISO 37101, which align with the UN Sustainable Development Goals (SDGs) in the long term. This document is in line with the delivery principles of a smart city provided by ISO 37106, including visionary, citizen-centric, digital, open and collaborative. This document is useful for support data and dataset management for standards on indicators for sustainable cities and communities developed by ISO/TC 268, but does not provide guidance on how to use those standards. Additionally, this document can be of use in research and educational activities.

This document applies to anomaloscopes used to examine red-green-colour vision by investigating the colour match of a mixture of red and green compared with yellow, known as the “Rayleigh equation”. This document specifies the requirements for optical and technical parameters, which are of physiological relevance to ensure that the measured values on the eye of the examinee are independent of the technical characteristics of the anomaloscope used.

This document specifies technical requirements for castings (steel, nickel alloys, and cobalt alloys) produced by the investment casting process. NOTE The International Standards specifying metallurgical material requirements for steel, nickel alloy, and cobalt alloy casting grades are listed in the Bibliography. The requirements stated in this document form an integral part of the material specification. In cases of conflict, the requirements of this specification take precedence over the individual material specification requirements.

This document specifies requirements for producing and testing a dyed sulfuric acid anodic coating on aluminium alloys. The anodizing process is applied in the manufacture of aerospace products to improve paint adhesion and resistance to corrosion and can colour the part in accordance with the drawing requirements.

This document specifies requirements for producing and testing an undyed sulfuric acid anodic coating on aluminium alloys. The anodizing process is applied in the manufacture of aerospace products to improve paint adhesion and resistance to corrosion.

This document analyses a feasible way to accommodate interoperability elements for the data component of a spatial data infrastructure (SDI) and extend the meta model framework for interoperability (MFI) in securing interoperability among heterogeneous domain information models under the smart city context. This document: a) outlines the interoperability issues for city domain information models; b) reviews relevant standards and best practices and examines methodologies or solutions to tackle the interoperability issues; c) supposes a use case and provides an example to secure interoperability among different domain information models using model registry; d) specifies technical requirements in concern about how to apply the interoperability elements of the meta model framework to support the interoperability of smart city services; e) highlights the standardization items to be developed to secure interoperability.

NOTE Clause A.2 contains guidance or rationale for this clause. This document specifies requirements for small-bore connectors intended to be used for connections in neural applications. This document does not specify requirements for the medical devices or accessories that use these connectors. Such requirements are given in particular standards for specific medical devices or accessories.

This document specifies a method for the determination of the specific electrical resistivity of cathode blocks and baked anodes used in the production of aluminium, using samples at ambient temperature.

This document specifies a test method for the quantitative determination of the antifungal activity by measuring the intensity of luminescence produced by an enzymatic reaction [adenosine triphosphate (ATP) method]. This document is applicable to various kinds of textile products, such as fibres, yarns, fabrics, clothing, bedclothes, home furnishings and other miscellaneous goods.

This document specifies the requirements for technical procedures, quality inspection, etc. for the surface treatment of austenitic stainless steel parts (e.g. 300 series, AISI 651, A286 or equivalent). This document applies to the removal of organic and inorganic contaminants, surface cleaning, surface finishing and surface passivation before the non-destructive test of austenitic stainless steel parts.

This document provides a telehealth cybersecurity reference model of the overall security framework for systems and services applied to telehealth. This document contains a general description of: — factors of telehealth cybersecurity threats; — relationships between security risks and safety risks in telehealth services; — methodologies for defining security levels in telehealth services; — a cybersecurity reference model of telehealth services. Defining the specific type of telehealth services is not covered in this document.

This document specifies information metadata, metrics metadata, clinical data linkage metadata, auxiliary fields, SAM interoperability, protection metadata and programming interfaces of genomic information. It defines: — metadata storage and interpretation for the different encapsulation levels as specified in ISO/IEC 23092-1 (in REF Section_sec_6 \r \h Clause 6 08D0C9EA79F9BACE118C8200AA004BA90B02000000080000000E000000530065006300740069006F006E005F007300650063005F0036000000 ); — metrics metadata containing sequencing data metrics at the dataset and access unit levels as specified in ISO/IEC 23092-1 (in REF Section_sec_7 \r \h Clause 7 08D0C9EA79F9BACE118C8200AA004BA90B02000000080000000E000000530065006300740069006F006E005F007300650063005F0037000000 ); — clinical data linkage metadata stored at the dataset group, dataset and annotation table levels as specified in ISO/IEC 23092-1 (in REF Section_sec_8 \r \h Clause 8 08D0C9EA79F9BACE118C8200AA004BA90B02000000080000000E000000530065006300740069006F006E005F007300650063005F0038000000 ); — protection elements providing confidentiality, integrity and privacy rules at the different encapsulation levels as specified in ISO/IEC 23092-1 (in REF Section_sec_9 \r \h Clause 9 08D0C9EA79F9BACE118C8200AA004BA90B02000000080000000E000000530065006300740069006F006E005F007300650063005F0039000000 ); — how to associate auxiliary fields to encoded reads (in REF Section_sec_10 \r \h Clause 10 08D0C9EA79F9BACE118C8200AA004BA90B02000000080000000F000000530065006300740069006F006E005F007300650063005F00310030000000 ); — interfaces to access genomic information coded in compliance with ISO/IEC 23092-1 and ISO/IEC 23092-2 (in REF Section_sec_12 \r \h Clause 12 08D0C9EA79F9BACE118C8200AA004BA90B02000000080000000F000000530065006300740069006F006E005F007300650063005F00310032000000 ); — mechanisms for backward compatibility with existing SAM content, and exportation to this format (in Annex E).