Search Catalog

This document specifies a reference software implementation of ISO/IEC 19566-5 [1]. The reference software is accompanied with a reference dataset which provides an extensive list of the various JUMBF data structures specified in ISO/IEC 19566-5 [1].

This document specifies an A-type ultrasonic pulse contact method applying the ultrasonic longitudinal wave technique to hardmetals. This document is applicable to the ultrasonic inspection for a hardmetal rod that has a circular end face with a diameter not less than 6,0 mm and a rod length of 40,0 mm to 380,0 mm, or a hardmetal product that has a non-circular testing area not smaller than the coverage area of the probe (not less than 12,0 mm in diameter) and a height of 10,0 mm to 380,0 mm. Within the detection range specified in this document, the sound transmission energy is expressed by the probe driving voltage, and the range is 100,0 V to 200,0 V.

This document describes the criteria and procedures used by the United States National Institute of Standards and Technology (NIST) to certify the calibration material SRM 2806d, which is used in the primary calibration of liquid automatic particle counters (APCs). SRM 2806d is a suspension of SAE 5 - 80 μm test dust in hydraulic fluid with a cumulative particle concentration determined through a consensus measurement processes, interlaboratory study (ILS), utilizing APCs. The original projected area equivalent diameters for SRM 2806 were certified using a scanning electron microscope (SEM) and image analysis techniques traceable to the meter through the NIST line scan interferometer.

This document specifies a method of measuring the burning velocity (BV) of lower burning refrigerants (ISO 817 [2]) or that use the BV in establishing requirements on the use of slow burning refrigerants (e.g. ISO 817:2024 [2], 6.1.3.3).

This document specifies principles, requirements and guidance for achieving and demonstrating carbon neutrality through the quantification, reduction and offsetting of the carbon footprint. This document defines terms used in relation to carbon neutrality and provides guidance on the actions necessary to achieve and demonstrate carbon neutrality. In accordance with common practice, it uses the word “carbon” to refer to all greenhouse gases (GHGs) in compound expressions such as “carbon neutrality”. It is applicable to a wide range of subjects such as organizations (including companies, local authorities and financial institutions) and products (goods or services, including buildings and events). It is not intended to be used for territories (such as regions, countries, states or cities), including signatories to the United Nations Framework Convention on Climate Change (UNFCCC) when reporting national outcomes for the purposes of that Convention. This document establishes a hierarchy for carbon neutrality where GHG emission reductions (direct and indirect) and GHG removal enhancements within the value chain take priority over offsetting. It includes requirements for carbon neutrality commitments and making carbon neutrality claims. This document is GHG programme neutral. If a GHG programme is applicable, the requirements of that GHG programme are additional to the requirements of this document.

This document specifies a test method for the determination of the content of n-butyl phenyl ether (BPE, CAS: 1126-79-0, also known as butoxy-benzene) in gas oils, kerosene, diesel fuel and biodiesel blends. The method uses a two-column gas chromatograph with an FID-type of detector. The application range is 0,27 mg/l to 19,75 mg/l of BPE, with the minimum and maximum reporting levels being 0,09 mg/l and 21,89 mg/l respectively.
NOTE   This corresponds to 1 % to 185 % of the average marking level of the ACCUTRACE™ Plus required by Commission Implementing Decision (EU) 2022/197 [1] of 17 January 2022 establishing a common fiscal marker for gas oils and kerosene.
The method is found to be applicable to determinations beyond this range or for specific other chemical markers that fall within the distillation temperature range of middle-distillates, but for that no precision has been determined.
WARNING — The use of this document can involve hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this document to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

This document covers hinged and pivoted steel (any kind) and aluminium based framed, glazed doorsets or openable windows. Throughout this document, the term "doorset" will be used to cover both doorsets and door assemblies. It prescribes the methodology for extending the application of test results obtained from fire resistance test(s) conducted in accordance with EN 1634-1.
Subject to the completion of the appropriate test or tests selected from those identified in Clause 4, the extended application can cover all or some of the following examples:
-   integrity (E), integrity & radiation (EW) or integrity & insulation (EI1 or EI2) classification,
-   glazed elements including vision panels and framed glazed doorsets,
-   air transfer grilles (louvres and/or vents),
-   side, transom or over panels,
-   items of building hardware,
-   decorative and protective finishes,
-   intumescent seals and non-intumescent (smoke, draught or acoustic) seals,
-   alternative supporting construction(s).
This document does not cover horizontal doorsets.
The effect on the Classification ‘C’ for the doorsets following an extended application process is not addressed in this document.

REN/ERM-EMC-419

This European Standard deals with the safety of electric water-bed heaters and their associated control units, for household and similar purposes, their rated voltage being not more than 250 V, including direct current (DC) supplied appliances.

This document gives guidance on the general procedures in the sampling and preparation for analysis of wood preservatives and preservative-treated timber.
This document is applicable to the provision of appropriate samples for analysis which can be used to check the content of active and other ingredients in preservative formulations, and the content of active and other ingredients of wood preservatives in treated timber, either before, during or after the service life of the timber.
NOTE 1   Methods of sampling creosote and creosote-treated timber are described in other standards: EN 1014-1, EN 1014-2 and EN 12490.
NOTE 2   No attempt has been made in this document to lay down detailed procedures to be adopted for control purposes at manufacturing plants where large volumes of preservatives are sampled. Nor does it attempt to establish procedures for checking the compliance of batches of treated timber with specifications demanding a defined level of treatment (see 6.2).

This document sets the minimum essential elements of traceability and evidence of verification to be present in a leather traceability system, kept by organizations along the animal-to-leather supply chain. It is applicable to all types of leather.
This document defines the requirements and related evidence for establishing the traceability of leather back to the originating farms or hunting area.
This document can be applied to any organization operating within the leather value chain.

IEC 62680-1-3:2026, this specification, defines the USB Type-C® receptacles, plug and cables.
The USB Type-C Cable and Connector Specification is guided by the following principles:
- Enable new and exciting host and device form-factors where size, industrial design and style are important parameters
- Work seamlessly with existing USB host and device silicon solutions
- Enhance ease of use for connecting USB devices with a focus on minimizing user confusion for plug and cable orientation
The USB Type-C Cable and Connector Specification defines a receptacle, plug, cable, and detection mechanisms that are compatible with existing USB interface electrical and functional specifications. This specification covers the following aspects that are needed to produce and use this new USB cable/connector solution in newer platforms and devices, and that interoperate with existing platforms and devices:
- USB Type-C receptacles, including electro-mechanical definition and performance requirements
- USB Type-C plugs and cable assemblies, including electro-mechanical definition and performance requirements
- USB Type-C to legacy cable assemblies and adapters
- USB Type-C-based device detection and interface configuration, including support for legacy connections
- USB Power Delivery optimized for the USB Type-C connector.
IEC 62680-1-3:2026 cancels and replaces the sixth edition published in 2024 and constitutes an editorial revision. This standard is the USB-IF publication Universal Serial Bus Type-C Cable and Connector Specification Revision 2.4. New release primarily includes incorporation of all approved ECNs as of the revision date plus editorial clean-up.

The present document specifies accessibility and interoperability characteristics for the following types of products and services when used in emergency communications. They form together a chain of items involved in accessible emergency communications:
• Communication terminals used in electronic communications
• Electronic communication services
• Emergency communications systems including PSAPs
• Assisting services used in electronic communication services (relay services, language translation services, expert services) The present document addresses technical aspects of interoperability between user equipment, originating services and emergency communications systems, and the interoperability and functionality required to be able to route emergency communications to the most appropriate PSAP and include assisting services when required. It specifies interoperable and accessible emergency communications, which incorporates voice, video, and real-time text. Focus is on SIP and IMS technologies for user equipment and originating services, and SIP technology for the emergency communications systems. Brief information is provided on how to arrange emergency communications access also for other technologies. General accessibility requirements on emergency communications as well as everyday communications including media performance aspects, functional details of the accessible media and general user interface requirements for accessibility are specified in EN 301 549 [1]. NOTE: The relationship between the present document and essential requirements of Directive (EU) 2019/882 [i.3], Annex I and Annex V is given in Annex AA and Annex AB.

This clause of Part 1 is replaced by the following:
This part of IEC 60730 applies to automatic displacement electrical controls
– for use in, on, or in association with appliances for household and similar use;
NOTE 1 Through this document, the word "control" means "displacement electrical control".
EXAMPLE 1 Displacement electrical controls used in electrical pressure cookers with gross volume up to 25 l, with working pressure over 4 kPa and less than 150 kPa.
– that are AC or DC powered controls with a rated voltage not exceeding 690 V AC or 600 V DC;
– used in, on, or in association with equipment that use electricity;
– that are mechanically or electrically operated, responsive to change of position of point of action.
NOTE 2 Requirements for manual switches not forming part of an automatic control are covered in IEC 61058-1-1.
This document applies to
– inherent safety of automatic electro-mechanical displacement electrical controls;
– functional safety of automatic electro-mechanical displacement electrical controls;
– the operating values, operating times, and operating sequences where such are associated with equipment safety;
– displacement electrical controls having temperature sensing element(s), in which cases additional requirements can be considered to be necessary. Requirements for temperature sensing controls are included in IEC 60730-2-9.
This document specifies the requirements for construction, operation and testing of automatic displacement electrical controls used in, on, or in association with equipment.
This document does not
– apply to automatic electronic controls;
– take into account the response value of an automatic action of a control, if such a response value is dependent upon the method of mounting the control in the equipment. Where a response value is of significant purpose for the protection of the user, or surroundings, the value defined in the appropriate equipment standard or as determined by the manufacturer applies.
NOTE 3 For more information about guidance to the application of displacement electrical controls, see Annex AA.

This document defines the loads and specifies the scantlings of sailing craft appendages on monohull sailing craft with a length of hull (LH) measured in accordance with ISO 8666 or a load line length (see ISO 12215-5:2019, Clause 1, NOTE 1) of up to 24 m. It gives: design stresses; the structural components to be assessed; load cases and design loads for keel, centreboard and their attachments; computational methods and modelling guidance; the means for compliance with its provisions.

This document specifies limit states and methods to prevent mechanical hazards in shafts and rotating or non-rotating axles of cranes by design and theoretical proof of competence.
This document is intended to be used together with the other generic parts of the EN 13001 series of standards (see Annex D).
This document covers specific shafts and rotating or non-rotating axles as an integrated part of cranes, that are not dealt with by other EN 13001 standards (e.g. pinned connections in EN 13001-3-1:2025). It is not intended to shafts or axles being part of standardized component (e.g. gearboxes, motors).
The significant hazardous situations and hazardous events that could result in risks to persons during intended use and reasonably foreseeable misuse are identified in Annex E. Clauses 4 to 7 of this document provide requirements and methods to reduce or eliminate these risks:
-   exceeding the limits of strength (yield, ultimate, fatigue);
-   exceeding temperature limits of material or components.
This document does not deal with the proofs of strength of welded and cast shafts, and dynamic instabilities such as shaft whirling.
This document does not apply to cranes that are manufactured before the date of its publication as EN and serves as a reference base for the European Standards for particular crane types (see Annex D).
This document deals only with limit state method in accordance with EN 13001-1:2015 [34].

2020-12-24: This prAB represents common mods to EN 62841-3-12:2019/prA1 (PR=73191) under parallel
D164/C043: DOW= DOR + 48 months

The present document specifies the accessibility requirements applicable to ICT products and services, together with a description of the test procedures and evaluation methodology for each accessibility requirement.
The present document is intended for use by designers, developers, evaluators, manufacturers, market surveillance entities, procurers, researchers, and anyone else interested in the accessibility of ICT products and services.
The present document is not intended to apply to assistive technologies that are designed specifically for use by people with disabilities, except for requirement 11.5.2.4 that requires assistive technologies to use the documented platform accessibility services, although making assistive technologies usable and applicable for people with multiple disabilities is desirable. The requirements do apply to the launch of assistive technologies since that is a function of the platform, not the assistive technology.
The present document supports the implementation of Directive (EU) 2016/2102 on the accessibility of the websites and mobile applications of public sector bodies [i.27], and of Directive (EU) 2019/882 on the accessibility of ICT products and services [i.29]. The coverage of the essential requirements of these Directives is given in Annexes ZA and ZB.
The present document contains the necessary accessibility requirements and provides a reference document such that if procedures are followed by different actors, the results of testing are similar and the interpretation of those results is clear. The test descriptions and evaluation methodology included in the present document are elaborated to a level of detail compliant with ISO/IEC 17007:2009 [i.14], so that conformance testing can give conclusive results.

This document specifies the following for raw bovine hides and skins intended for use throughout the leather manufacturing supply chain:
—   Terms and definitions;
—   Requirements for the presentation of raw hides and skins.
It is applicable to fresh and salted bovine hides and skins.
It outlines the opening cut and trim of hides and skins and the types of defects typically associated with this raw material.
NOTE 1 Opening cut and trim vary from country to country.
It shows which parts of hides and skins can be used for leather production and which factors influence the quality of hides and skins.
Furthermore, it gives recommendations on precautions to be taken for transport, preservation, loading and unloading.
NOTE 2 For commercial agreements between the buyer and the supplier of hides and skins, operators use the INTERNATIONAL CONTRACT No. 6 – HIDES and SKINS as drawn up by the International Council of Hides, Skins and Leather Traders Associations (ICHSLTA) and the International Council of Tanners (ICT) [1].

This document specifies the characteristics of bolts, normal hexagonal head, coarse tolerance normal shank, medium length thread, in heat resisting nickel base alloy, aluminium IVD coated.
Classification: 1 250 MPa   / 425 °C

This document specifies a method for measurement of the viscosity of a ceramic slurry using a rotational viscometer. The method only involves rotations with a monotonic angle variation. This document does not apply to measurements using an oscillating rotation. Ceramic slurry is used in ceramic processes such as dip coating, spray coating, screen printing, slip casting, tape casting, spray drying and polishing. This document does not apply to dispersion of fillers in molten thermoplastic polymers.

This document specifies methods for the examination of surface condition (roughness and surface discontinuities) of castings on surfaces that remain as-cast.
This document is applicable to all cast metals and all casting processes except die casting.
This document is not applicable to machined surfaces.

IEC 63479-2:2026 describes the functional requirements for infotainment services for public vehicles (PVIS).

This document specifies principles and requirements and gives guidance on ecolabelling programmes and ecolabels
This document is applicable to ecolabelling programme development, selection of product categories, product environmental criteria and product function criteria, and the process for assessing and certifying products that are licensed to use an ecolabel. It provides guidance on how ecolabels in conformity with this document can be differentiated from other environmental statements and ecolabels in the market.
NOTE            Ecolabels and ecolabelling programmes address environmental aspects of products but can also include social and economic aspects in support of sustainable development.

This document:
a)   describes the general principles for data centres upon which the requirements of the EN 50600 series are based;
b)   defines the common aspects of data centres including terminology, parameters and reference models (functional elements and their accommodation) addressing both the size and complexity of their intended purpose;
c)   describes general aspects of the facilities and infrastructures required to support data centres;
d)   specifies a classification system, based upon the key criteria of "availability", "security" and "resource and energy efficiency enablement" over the planned lifetime of the data centre, for the provision of effective facilities and infrastructure;
e)   details the issues to be addressed in a business risk and operating cost analysis enabling application of the classification of the data centre;
f)   provides reference to documentation, operation and management of data centres;
g)   introduces the concepts of Key Performance Indicators (KPIs) for resource management and resilience of data centre facilities and infrastructures;
h)   defines the use of an environmental sustainability strategy.
The following topics are outside of the scope of this series of documents:
1)   the selection of information technology and network telecommunications equipment, software and associated configuration issues are outside the scope of this document;
2)   quantitative analysis of overall service availability resulting from multi-site data centres;
3)   safety and electromagnetic compatibility (EMC) requirements (covered by other standards and regulations. However, information given in this document can be of assistance in meeting these standards and regulations).

This part  of  IEC/IEEE 80005   describes high-voltage  shore  connection  (HVSC)    systems, onboard the ship and on shore, to supply the ship with electrical power from shore.
This document  is  applicable  to  the  design, installation  and  testing  of  HVSC  systems  and addresses
• HV shore distribution systems,
• shore-to-ship connection and interface equipment,
• transformers/reactors,
• semiconductor/rotating frequency convertors,
• ship distribution systems, and
• control, monitoring, interlocking and power management systems.
It does  not  apply  to  the  electrical  power  supply  during  docking  periods,  for  example  dry docking and other out of service maintenance and repair.
Additional and/or alternative requirements can be imposed by  national administrations   or  the authorities  within  whose  jurisdiction the  ship  is  intended  to  operate  and/or  by  the  owners  or  authorities responsible for a shore supply or distribution system.
It is expected that HVSC systems will have practicable applications for ships requiring 1 MVA or more or ships with HV main supply.
Low-voltage shore connection systems are not covered by this document.

IEC 62590-2-2:2026 describes functions and working principles, specifies requirements, interfaces, and test methods for controlled converters for DC electric traction power supply systems:
– AC/DC converters:
• rectifiers,
• inverters,
• combinations.
– DC converters.
The purpose of the converters can be a power connection to other power networks or energy storages.
The common characteristic of this equipment is the possibility to influence the power flow in the DC electric traction power supply system. The converters can be:
– line-commutated;
– self-commutated.
This document applies to fixed installations of the following electric traction systems:
– railway networks,
– metropolitan transport networks including metros, tramways, trolleybuses and fully automated transport systems, magnetic levitated transport systems, and electric road systems.

This document gives requirements for the design, fabrication, installation, commissioning and integrity management of workover rigs on offshore fixed platforms. This document is not applicable to workover equipment: installed on mobile or floating offshore units; intended for onshore use; coiled tubing unit or snubbing unit.

This document sets out the fundamental principles and procedure of determining the groundwater remediation targets for post in situ leach (also referred as in situ recovery) uranium mining. It also delineates the environmental investigation requirements for groundwater remediation, stakeholder identification and engagement, groundwater remediation technical options and their analysis of effectiveness, and considerations for setting and adjusting the groundwater remediation target values. This document is applicable to controlling and mitigating groundwater impact and conducting groundwater remediation for in situ leach uranium mining. It can also serve as a reference for contamination control, mitigation and remediation of groundwater for other in situ leach metal mining projects.

This document specifies the general requirements and test methods of Chuzhen instruments. It is only applicable to non-disposable Chuzhen instruments. It is not applicable for any disposable Chuzhen instruments or for those with electrical, heat-storing, or other special characteristics.

This document defines fundamental definitions for enhanced oil recovery (EOR) concepts and core methodologies, specifically addressing thermal recovery, gas flooding, chemical flooding, and microbial enhanced oil recovery technologies.

This document specifies a sampling method to determine the quantity of formaldehyde (HCHO) in the air with the range of approximately 1 µg/m3 to 1 mg/m3 in a time-weighted average (TWA) sample, for long-term (1 h to 24 h) and short-term (5 min to 60 min) sampling. This method involves the collection of compounds from air on to adsorbent cartridges coated with 2,4-dinitrophenylhydrazine (DNPH) and subsequent analysis of the hydrazones formed by high performance liquid chromatography (HPLC) with detection by ultraviolet absorption [7] [8]. This document can also be applied for the determination of at least 12 other aromatic as well as saturated and unsaturated aliphatic carbonyl compounds (aldehydes and ketones), with modification, such as: — acetaldehyde; — acetone; — benzaldehyde; — butyraldehyde; — capronaldehyde; — 2,5-dimethylbenzaldehyde; — formaldehyde; — isovaleraldehyde; — propionaldehyde; — m-tolualdehyde; — o-tolualdehyde; — p-tolualdehyde; — valeraldehyde. This document does not apply to longer chained or unsaturated carbonyl compounds such as acrolein. An alternative sampling method using sorbent tubes and analysis by thermal desorption using gas chromatography with mass spectrometry (GC-MS) is given in Annex A.

This document specifies requirements, a framework, a general specification procedure, a guide for elaboration, and categorization of application methods of an equipment behaviour catalogue (EBC) in smart manufacturing.

This document provides a set of properties for the description of learning resources from ISO 15836-1 and ISO 15836-2 using the framework provided in ISO/IEC 19788-1. This document specifies properties whose codomain is "literal" (as considered in early Dublin Core) and properties whose codomain is a resource class; the ISO 15836 series implicitly allowing both. This provides full interoperability at the time of expressing existing Dublin Core records with MLR, while allowing a linked data approach for the description of learning resources.

This document covers, regardless of if manufactured in factories or in temporary plants on site under the same conditions, precast concrete elements made of lightweight concrete with an open structure, and with a dry density between 400 and 2000 kg/m3, intended to be used as structural element:
—   solid, hollow core and multilayer load-bearing wall elements;
—   retaining wall elements, excluding retaining walls intended to retain tanks or reservoirs of liquids and diaphragm walls (concrete sheet piling);
—   solid, hollow core and multilayer roof elements, excluding ribbed floor elements and floor slabs elements;
—   solid, hollow core and multilayer floor elements excluding floor elements with the intended use to carry traffic loads;
—   solid and hollow core beams;
—   solid piers.
This document covers, regardless of if manufactured in factories or in temporary plants on site under the same conditions, precast concrete elements made of lightweight concrete with an open structure, and with a dry density between 400 and 2000 kg/m3, intended for not to be used as structural use:
—   solid, hollow core and multilayer non-loadbearing wall elements;
—   cladding elements;
—   rectangular cross-section box culverts;
—   components for noise barriers.
NOTE   In addition to their loadbearing and encasing function, elements can also be used to provide fire resistance, sound insulation and thermal insulation.
Recycled lightweight concrete with an open structure (other than closed-loop recycling during production) is covered by this document.

This document classifies polymer-based crown and veneering materials used in dentistry and specifies their requirements. It also specifies the test methods to be used to determine conformity to these requirements. This document is applicable to polymer-based crown and veneering materials for laboratory fabricated permanent veneers or crowns. It also applies to polymer-based dental crown and veneering materials for which the manufacturer claims adhesion to the substructure without macro-mechanical retention such as beads or wires.

This document provides two broad types of requirements for the determination and use of meteorological and oceanographic (metocean) conditions for the design, construction and operation of offshore structures:
those related to the determination of environmental conditions in general, together with the metocean parameters that are required to adequately describe them;
those related to the characterization and use of metocean parameters for the design, the construction activities or the operation of offshore structures.
This document covers the following environmental conditions and metocean parameters:
extreme and abnormal values of metocean parameters that recur with given return periods that are considerably longer than the design service life of the structure;
long-term distributions of metocean parameters in the form of cumulative, conditional, marginal or joint statistics of metocean parameters;
normal environmental conditions that are expected to occur frequently during the design service life of the structure.
Metocean parameters specified in this document are applicable to:
the determination of actions for the design of new structures;
the determination of actions for the assessment of existing structures;
the site-specific assessment of mobile offshore units;
the determination of limiting environmental conditions, weather windows, actions and action effects for pre-service and post-service situations (i.e. fabrication, transportation and installation or decommissioning and removal of a structure);
the operation of the platform, where appropriate.
It is beyond the scope of this document to provide detailed instructions that can be followed to produce reliable estimates of extreme or abnormal conditions in all areas and in all cases.

This part of the EN IEC 61360 specifies the new data dictionary (domain) “IEC 61360-7 - General items” including its generic concepts. The IEC 61360-7 data dictionary provides concepts (dictionary elements e.g. classes, properties) intended for cross-domain use.

IEC 81346-14:2026, published jointly by IEC and ISO, provides, in combination with IEC 81346‑1 and IEC 81346‑2, rules and recommendations on the structuring of systems and the information on systems of manufacturing systems. It also provides additional classification schemes to those of IEC 81346‑2 for use in reference designations within manufacturing systems. It is published as a double logo standard.
The structuring principles and the classes of objects are intended to provide a clear identification and localization of the objects, and for use in their labelling in the manufacturing plant, for their designation in technical documents and for the designation of the technical documents as well.
The requirements in this document apply for processing, transportation and storage of products, as well as for systems to support the manufacturing process such as electrical systems, management systems and waste disposal systems.
This document applies to different areas within the manufacturing industry such as light industry, electrical and optical industry, chemical industry, material industry and heavy industry.
This document is not applicable for designations related to product individuals (e.g. inventory number, serial number) nor to the products manufactured.
This document is also a horizontal publication intended for use by technical committees in preparation of publications related to reference designations in accordance with the principles laid down in IEC Guide 108.

IEC 62680-1-2:2026, the USB Power Delivery specification defines a power delivery system covering all elements of a USB system including USB Hosts, USB Devices, Hubs, Chargers and cable assemblies. This specification describes the architecture, protocols, power supply behavior, connectors and cabling necessary for managing power delivery over USB at up to 100W in SPR Mode and 240W in EPR Mode. This specification is intended to be fully compatible with and extend the existing USB infrastructure. It is intended that this specification will allow system OEMs, power supply and Peripheral developers adequate flexibility for product versatility and market differentiation without losing backwards compatibility.
IEC 62680-1-2:2026 cancels and replaces the seventh edition published in 2024 and constitutes a technical revision.
Extended Power Range (EPR) including Adjustable Voltage Supply (AVS) has been added. This document is the USB-IF publication Universal Serial Bus Power Delivery Specification Revision 3.2, Version 1.1.

This document specifies methods of measurement of electrical power in networked standby mode and the reporting of the results for edge equipment.
The measurement of power and energy use in non-active mode, other than networked standby mode, is covered by IEC 62301 [1], including the input voltage range.
This document applies to edge equipment that is powered by:
– low voltage mains AC power (LV ≤ 1 000 V AC), or
– an external power supply that provides low voltage (LV ≤ 1 000 V) or extra low voltage (ELV ≤ 50 V) AC or DC power, or
– a separate source of extra low voltage DC power (ELV ≤ 50 V DC), or
– an internal main battery.
Conditions that are outside the scope of this document are as follows:
– active modes (primary function),
– other non-active modes (which are either covered by IEC 62301 [1] or by specific product group standards),
– conditions where main batteries are being charged other than in maintenance mode,
– disconnected condition of the equipment.
This document applies to the following product groups where a networked standby mode is present:
– edge equipment with a network reactivation function, such as household appliances, information technology equipment, audio, video and multimedia systems and equipment,
– digital radio receivers with an emergency warning function,
– gas burning equipment with electrical components.
NOTE 1 The measurements of power, energy use and performance of products during their intended use (when performing their primary functions) are generally specified in product standards and are not covered by this document.
NOTE 2 Networked standby mode for lighting equipment and the measurement of power is specified in IEC 63103 [4].
NOTE 3 Interconnecting equipment (equipment that provides network infrastructure and function) is outside the scope of this document. Measurement of electrical power in networked standby mode for interconnecting equipment is the subject of ETSI standard EN 303 423 [5].
This document also provides a method to test power management and to test whether it is possible to deactivate wireless network connection(s).
NOTE 4 Edge equipment can also include auxiliary batteries.
This group EE publication is primarily intended to be used as an EE standard for the products mentioned in the scope, but is also intended to be used by TCs in the preparation of publications for products which are included in the boundary mentioned in the scope of this document.

This document specifies requirements for railway driving simulators for drivers' training. It defines the minimum functions and performances for a driver training simulator.
This document is applicable to all guided transport systems, including for mainlines, metros, tramways and light rails, as part of public/private transport systems. These vehicles are intended for the operation of intercity, urban and suburban passenger or freight services with self-propelled systems and operated on either segregated or not segregated paths.
Annexes A to D provide additional information.

The purpose of this document is to define data communication services and protocols for computer equipment used for monitoring and control of HVAC&R and other building systems and to define, in addition, an abstract, object-oriented representation of information communicated between such equipment, thereby facilitating the application and use of digital control technology in buildings.

This part of IEC 60794-1 describes test procedures used to establish uniform requirements for optical fibre cables for the environmental property - underwater cable resistance to hydrostatic pressure.
This document applies to optical fibre cables for use with telecommunication equipment and devices employing similar techniques, and to cables having a combination of both optical fibres and electrical conductors.
See IEC 60794-1-2 for a reference guide to test methods of all types and for general requirements.

IEC 63479-3:2026 describes the infotainment services for public vehicles (PVIS) framework, including the functional reference models and the information flows for functional operations.

This document applies to decorative, automatically controlled fireplaces for domestic use, producing a flame using liquid alcohol, hereafter referred to as fuel, for decoration.
NOTE 1   The requirements outlined in this document can be applied even outside domestic settings. In that case additional or different rules on the use of the fireplaces can apply.
This document applies to decorative fireplaces that do not require manual user interaction during normal operation. These fireplaces include electric or electronic components that control the basic operation (incl. automatic filling system).
NOTE 2   These components control the safe operation and avoid hazards such as:
—   Fuel spillage while filling
—   Overfilling
—   Fuel explosion while igniting
—   Accidental ignition while refilling
—   Overheating
—   Unsuccessful extinguishing
The document applies only to fireplaces for use in indoor areas.
This document applies to free-standing, wall-mounted and built-in fireplaces.
This document applies to fireplaces ready for use, whose burner is an integral component of the fireplace.
This document does not apply to fireplaces specifically designed for heating food or keeping food warm (rechauds), as well as to fireplaces for use in boats, caravans, other.
This document does not apply to fireplaces with declared heating function.
This document does not apply to fireplaces, that are connected to a flue.
NOTE 3   Because of the safety component of automatically operated fireplaces this scope is not limited to a specific heat output or fuel consumption. Regarding heat output limits, national legislation can apply.

This document specifies requirements for the measurement, documentation and presentation of mechanical propulsion energy consumption for small craft underway, irrespective of the propulsion system, type of energy or hull characteristics. This document does not apply to wind, wind-assisted hybrid and wave propulsion systems.

This document establishes general rules and safety requirements on the application of capacitors, resistors, inductors, and complete filter units for electromagnetic interference
suppression which will be connected to an AC mains or other supply (DC or AC) with a nominal voltage not exceeding 1 000 V AC having a nominal frequency not exceeding 400 Hz, or 1 500 V DC.
It facilitates drafters of product safety standards and other stakeholders such as designers, manufacturers, se rvice providers, policy makers and regulators to consider safety aspects for the intended use and the reasonably foreseeable misuse of these components in its products and systems and apply risk reduction measures to achieve a tolerable risk level.

This document provides product category rules (PCR) guidance for the development of Type III environmental declarations for prefabricated reinforced components of autoclaved aerated concrete or lightweight aggregate concrete with open structure according to EN 15804:2012+A2:2019.
This document defines the parameters to be reported, the EPD types (and life cycle stages) to be covered, the rules to be followed for generating life cycle inventories (LCI) and conducting life cycle impact assessments (LCIA), and the data quality to be used in the development of EPDs.
In addition to the common parts of EN 15804:2012+A2:2019, this document provides guidance for elements made as prefabricated reinforced components of autoclaved aerated concrete or lightweight aggregate concrete with open structure:
—   defines the system boundaries;
—   defines the modelling and assessment of material-specific characteristics;
—   defines allocation procedures for multi-output processes along the production chain;
—   defines allocation procedures for reuse and recycling;
—   includes the rules for calculating the LCI and the LCIA underlying the EPD;
—   provides guidance/specific rules for the determination of the reference service life (RSL);
—   gives guidance on the establishment of default scenarios;
—   gives guidance on default functional units for elements.
This document is intended to be used for cradle to gate, cradle to gate with options or cradle to grave assessments, when the intention is clearly stated in the system boundary description.