Search Catalog

This document establishes a framework for the implementation of a sharing economy. It specifies requirements for and gives guidance on the operational economic, social, environmental, legal and other considerations and factors associated with implementation of sharing economy applications and approaches in sharing economy contexts. This document is applicable to all actors participating in the sharing economy ecosystem, including platform operators, providers, users and other stakeholders. This document is applicable to all types and sizes of organization (e.g. commercial enterprises, government agencies, not-for-profit organizations).

This document establishes required practices for the safe use of bridge and gantry cranes. It is intended to be used in conjunction with ISO 12480-1. This document applies to the bridge and gantry cranes as defined in ISO 4306-1 and ISO 4306-5.

This document specifies the requirements and test methods applicable to factory applied ceramic epoxy lining for ductile iron pipes conforming to ISO 2531, ISO 7186 and ISO 16631, excluding potable water, for operating temperature up to 50 °C.

This document specifies the determination of aldehydes and ketones content in polyether polyols and polymer polyols by high performance liquid chromatography (HPLC). This document is applicable to the determination of formaldehyde (HCHO), acetaldehyde (CH3CHO), acrolein (CH2=CHCHO) and acetone (CH3COCH3) in polyether polyols and polymer polyols.

This document specifies the conditions for determining the tensile properties (including tensile modulus, Poisson’s ratio, strength, strain at maximum force and fracture strain) of ceramic matrix composite materials with continuous fibre reinforcement at room temperature. This document applies to all ceramic matrix composites with a continuous fibre reinforcement, including unidirectional (1D), bi-directional (2D), and multi-directional (xD, with x > 2), reinforcement, loaded along a principal axis of reinforcement. NOTE In most cases, ceramic matrix composites to be used at high temperature in air are coated with an antioxidation coating.

This document specifies a method for sampling and handling earthworms from field soils as a prerequisite for using these animals as bioindicators (e.g. to assess the quality of a soil as a habitat for organisms). This document is applicable to all terrestrial biotopes in which earthworms occur. This document does not apply to semi-terrestrial soils (i.e. soils that are partly aquatic, such as bogs, beaches, marshes, stream margins) and it can be difficult to use under extreme climatic or geographical conditions (e.g. in high mountains). Methods for other soil organism groups, such as micro-arthropods and enchytraeids (mesofauna), are covered in other parts of the ISO 23611 series.

This document establishes a standardized notation with consistent design requirements for the results of business reporting, including written reports, presentations and dashboards. The notation specifies requirements for the visual appearance of: recurring visual aspects, such as the layout of charts, tables and text; their characteristics; the labelling of content. This document is applicable to business reporting regardless of an organization’s type, size, location or the nature of products and services delivered. For further guidance on accessibility requirements, refer to Web Content Accessibility Guidelines 2.2 and ISO/IEC 23859:2023.

This document specifies the general requirements for the in vitro amplification of nucleic acid sequences (DNA or RNA). This includes polymerase chain reaction (PCR)-based methods like quantitative PCR, qualitative PCR, reverse transcription-PCR and digital PCR.
The minimum requirements laid down in this document are intended to ensure that comparable and reproducible results are obtained in different organizations. It covers quality assurance aspects to be considered when working with PCR-based methods in a laboratory as well as validation and verification.
In addition to laboratory PCR-based methods, this document is also applicable to on-site PCR-based methods.
This document is applicable to PCR-based methods used for the analysis of microorganisms and viruses in different water matrices, including but not limited to:
—     drinking water;
—     groundwater;
—     pool water;
—     process water;
—     surface water;
—     wastewater.
This document is applicable to the detection and quantification of nucleic acids (DNA or RNA) of microorganisms by PCR-based methods in water such as bacteria, yeasts, fungi but also parasites such as Cryptosporidium, Giardia, amoebas and multicellular organisms. In addition, this document is applicable to the detection and quantification of nucleic acids from viruses in water by PCR-based methods.
NOTE            In the context of this document, viruses are considered to be microorganisms. Clauses in this document can also specifically apply to viruses and not to other types of microorganisms. In these clauses, viruses are mentioned separately.

This document specifies requirements for the general safety and structural safety which include strength, reliability and stability for outdoor tables for camping use, for domestic use and for contract use, used by adults, including those with glass in their construction.
It does not apply to street furniture.
It does not apply to office tables, worktables, desks and laboratory worktops for educational institutions for which other EN standards exist.
With exception of the stability tests, this document does not provide assessment of the suitability of any storage features included in outdoor tables for which other EN standards can be applied.
It does not include requirements for electrical safety.
It does not include requirements for the resistance to ageing, degradation.

This document specifies the test methods for constant wear suits and abandonment suits.
Requirements for constant wear suits are given in ISO 15027-1:2026.
Requirements for abandonment suits are given in ISO 15027-2:2026.

This document specifies the minimum requirements for general safety and structural safety which include strength, reliability and stability of all types of outdoor seating for camping use, for domestic use and for contract use, for adults, without regard to materials, design or manufacturing processes.
It does not apply to street furniture.
It does not include requirements for removable upholstery, including the cover and filling.
It does not include requirements for the durability of castors/wheels and height adjustment mechanisms.
It does not include requirements for electrical safety.
It does not include requirements for the resistance to ageing and degradation caused by light, temperature and moisture.
The test requirements contained within this document are based on use by persons weighing up to 110 kg.

Shall be according to EN 15502-2-1:2022+A1:2023, Clause 1 with the following modifications:
Replace:
“This document covers gas-fired central heating boilers from the types C1 up to C(11) and the types B2, B3 and B5:”
By:
“This document covers gas-fired central heating boilers from the types C1, C3 up to C9 and the types B2, B3 and B5 :”
b) is replaced by:
b) that use combustible gases of gas group 4Y at the nominal pressure of 20 mbar;
Appliance category   Pn   Pmin   Pmax
4th family   20   17   25
k) is not applicable.
Add at the end of the list, after k), following:
l) which are fully premixed appliances equipped with a Pneumatic Gas/Air Ratio controller (PGAR) or an Adaptive Combustion Control Function (ACCF) that are intended to be connected to hydrogen gas grids where the quality of the distributed hydrogen gas is likely expected to stay within a Wobbe index range of 42 to 46 MJ/m3.
Replace in the list following
“This document does not cover all the requirements for:”
ab), ag), ah) and al) by:
ab) appliances that are intended to be connected to gas grids where the quality of the distributed hydrogen gas is likely to vary outside the Wobbe index range of 42 to 46 MJ/m3;
ag) C(10) boilers;
ah) C(11) boilers;
al) Partially premixed appliances equipped with an adaptive combustion control function (ACCF).
and add an) and ao);
an) The conversion from natural gas to hydrogen.
ao) The risk of aeration of the gas supply to the appliance.

This document specifies allowable limits (AL) for residual ethylene oxide (EO) and ethylene chlorohydrin (ECH) in EO-sterilized medical devices, procedures for the measurement of EO and ECH, and methods for determining conformity so that devices can be released. Additional background, including guidance and a flowchart showing how this document is applied, are also included in Annexes A, B, C, D, E, F, G, H, I, J and K.
EO-sterilized devices or components that have neither direct nor indirect body or user contact (e.g. in vitro diagnostic devices) are out of scope of this document. This document does not apply to devices that have been demonstrated to not absorb or retain EO or its degradation product ECH, such as medical devices made exclusively of metal alloys and glass, see Clause C.5[228].
NOTE            This document does not specify limits for ethylene glycol (EG). No device limits are specified for EG because the risk assessment in Annex F indicates that calculated allowable levels are higher than those likely to occur in a medical device.

This document specifies requirements to the safe handling and the physical, chemical and biological testing of plastic containers for parenterals.
This document is applicable to plastic containers for parenterals having one or more chambers and having a total nominal capacity in the range of 50 ml to 5 000 ml such as film bags or blow-moulded plastic bottles for direct administration of infusion (injection) solutions.
NOTE 1        In some countries, national or regional pharmacopoeias or other government regulations are legally binding, and these requirements take precedence over this document.
NOTE 2        Annex E provides explanations about the history of the development of the standard and summarises the different arguments discussed within ISO/TC 76 during the elaboration of the document.
NOTE 3        Annex F provides recommendations regarding sustainability.
NOTE 4        Annex G provides information on attributive and variable testing.

This part of EN 16432 series specifies how to integrate the particular aspects of ballastless track systems for attenuation of vibration into the system and subsystem design and component configuration according to EN 16432-2:2017.
The general system and subsystem design requirements are assigned from EN 16432-1:2017.
Additional noise and vibration requirements can be project specific and are not provided by this document. Acoustic requirements are considered as input for the track design from the acoustic design. The acoustic design and the track design affect each other and may require an iterative overall design process.
The range of applicability covers all kind of rail systems including Urban Rail systems.

This document specifies requirements for implantation test methods for preclinical assessment of the local effects after implantation of medical devices or materials intended for use in medical devices. This document is applicable to the evaluation of local tissue responses from medical devices that are intended to be used where skin or mucosal tissue is breached, when required.
This document is applicable to medical device or materials that require implantation evaluation and can be solid or non-solid (such as porous materials, liquids, gels, pastes, powders, and particulates), absorbable, degradable, non- absorbable, or can be tissue-engineered medical products (TEMPs).
These implantation tests are not intended to evaluate or determine the performance of the test sample in terms of mechanical loading or functional performance. This document also does not provide guidance on methods and study design to satisfy requirements for systemic toxicity, carcinogenicity, teratogenicity or mutagenicity. However, the study designs can be modified to also assess other biological effects.

This document specifies a method for the determination of carbon monoxide (CO) in the vapour phase of tobacco heating system according to ISO 5501-1, by a non-dispersive infrared analyser (NDIR). NOTE If tested products provide CO levels outside of the upper limit of the calibration range described in this document, then the calibration range described in ISO 22947 applies.

This document describes methods for the determination of sulfur and chlorine content in solid biofuels and pyrogenic biocarbon and specifies two methods for decomposition of the fuel and different analytical techniques for the quantification of the elements in the decomposition solutions. The determination of other elements such as fluorine and bromine are also possible with the methods in this document, however performance data for these elements are not provided. The use of automatic equipment is also included in this document, provided that a validation is carried out as specified and that the performance characteristics are similar to those of the method described in this document.

This document specifies a general concept for provenance information of biological material and data, organizational roles, and requirements for provenance information management. The provenance information covers any information relevant to the traceability, quality and fitness for purpose of the biological material and data generated throughout the life cycle of the biological material from collection to analysis, including data originating from analytical procedures applied to the biological material and further processing of the data. This document is applicable to organizations, authorities and industries that are: acquiring, collecting, processing, testing, analysing, storing, or distributing biological material in biotechnology and biomedicine (e.g., biobanks, laboratories, biomedical research as well as biotechnological development or production); generating, collecting, analysing, processing, or storing data on and related to biological material (e.g., biobanks, laboratories, developers, manufacturers, or other institutions and commercial organizations in biotechnology or biomedicine); generating, collecting, analysing, processing, or storing data or digital objects in biotechnology and biomedicine (e.g., in vitro/in vivo/in silico diagnostics developers and manufacturers, or other institutions and commercial organizations in the domain); manufacturing devices or software for the aforementioned tasks or providing facilities for these tasks. This document is also applicable to providers of services related to provenance information management (e.g., provenance information generation, storage, provision, or validation). This document can be used by customers, regulatory authorities, organizations and schemes using peer-assessment, accreditation bodies, and others for confirming or recognizing the competence of the aforementioned parties. This document does not apply to biological material and data used for medical diagnosis, treatment and therapy. NOTE 1 This document can be applied by organizations performing laboratory or research activities as well as other activities in biotechnology and biomedicine. NOTE 2 International, national, or regional regulations, standards, or requirements can apply to specific topics covered in this document, e.g., for organizations handling human materials procured and used for diagnostic and treatment purposes.

This document defines terms related to integration of life-cycle data for process plant installations. These terms are used by the parts in the ISO 15926 series. The following are outside the scope of this document: the reference data items that are contained in the reference data library, such as those covered in ISO/TS 15926-4:2024; the entities used in the data model, such as those covered in ISO 15926-2:2003.

IEC TS 62607-6-36:2026, which is a Technical Specification, establishes a standardized method to determine the key control characteristic
• reduction status
for graphene oxide (GO) and reduced graphene oxide (rGO) by
• ultraviolet-visible spectroscopy (UV-Vis).
The reduction status is not a quantitative value, but rather a compilation (table) of six parameters extracted from UV-Vis absorption spectra. These six parameters can be obtained from GO and rGO as follows:
(1) the peak location of GO, (2) the shoulder peak of GO, (3) the full width at half maximum (FWHM) of the main absorption peak of GO, (4) the peak location of rGO, (5) FWHM of the main absorption peak of rGO and (6) the spectral peak shifts between GO and rGO.
• The method is applicable to the characterization of GO and rGO materials (where rGO is obtained from the corresponding GO) produced by different reduction techniques, as well as to commercial products in solution or film form.
• Individual GO or rGO materials can also be characterized, but only partial parameters can be obtained. Specifically, peak location, FWHM, and shoulder peak can be measured from each GO or rGO material, while peak shift requires both GO and its corresponding rGO for comparison.
• The method is suitable for quality assurance and for monitoring the reduction process during the production of rGO.
• The method does not provide full chemical analysis. Complementary techniques can be required beyond the UV-Vis spectral features.

IEC TS 62565-4-3:2026, which is a Technical Specification, establishes a blank detail specification (BDS) for quantum dot enabled light emitting diodes (QLEDs) used for printed light emitting diodes (LEDs).
This document is intended to be used for display applications.
The relevant key control characteristics (KCCs) include optical, physical, chemical, and structural properties of colloidal quantum dots (QDs). For each KCC listed, methods and existing standards for their measurement are reported. The applicability of such methods and standards to different material categories (physical forms) of QDs, for example colloidal solution, inks, films, is indicated.
Numeric values for the KCCs are left blank as they will be specified between customer and supplier in the detail specification (DS). In the DS, KCCs can be added or removed if agreed between customer and supplier.

This document specifies the methodology for applying precision estimates of a test method derived from the processes specified in ISO 4259-1. In particular, it specifies the procedures for setting the property specification limits based upon test method precision where the property is determined using a specific test method, and determines the specification conformance status when there are conflicting results between supplier and receiver. Other applications of this test method precision are briefly described in principle without the associated procedures. The procedures in this document have been designed specifically for petroleum and petroleum-related products, which are normally homogeneous. However, the procedures described in this document can also be applied to other types of homogeneous products. This document is not applicable to non-homogenous products.

This document presents an analysis of a test method and procedures for predicting print image quality for prints from high-speed inkjet printing systems. Results from an initial set of tests are reported. Based on this method, a set of paper properties and their ISO related standards is given, in addition to those presented in ISO 15397.

This document specifies a test method for the determination of heating performance of wearable heating e-textile products. Wearable heating textile products are made of e-textile parts including a portable battery for electric heating and conventional textile parts for garments. This document includes the test procedure for the heating temperature and power consumption of wearable heating garments such as jackets, vests, etc. Heating gloves and footwear are excluded. The safety and security of heating products are excluded, as the information on thermal safety limits for heating products is addressed in IEC 60335-2-17 and IEC 62368‑1. The performance and safety of the portable battery are also excluded.

IEC 61514:2026 specifies tests designed to determine the static and dynamic performance of single-acting or double-acting analogue positioners. The tests apply to positioners which receive standard analogue input signals (as specified in IEC 60381-1, IEC 60381-2 and IEC 60382) and have a pneumatic output. Positioners with pulsed or digital input signals, positioners with digital controllers and positioners with pulsed outputs are outside the scope of this document. Testing is conducted either on a positioner alone, independently of an actuator, or on a positioner mounted and connected to a specific actuator, as a combined unit. The text makes clear where different approaches are required. The methods of evaluation given in this document are intended for use by manufacturers to determine the performance of their products, and by users, or independent testing establishments, to verify manufacturers' performance specifications. The closest liaison between the evaluating body and the manufacturer is indispensable during the tests, including the possibility for the manufacturer to influence the test programme based on the manufacturer's specifications for the instrument and comment on both the test programme and the results. This document is intended to provide definitions of positioner elements, actions, and characteristics, to specify uniform methods of measuring performance errors and effects of influence quantities on those characteristics, and to describe methods of reporting and evaluating the results of the measurement data obtained. The test conditions described in this publication (for example range of ambient temperatures and power supply) relate to conditions which commonly arise in use. Consequently, the values specified are used where no other values are specified by the manufacturer or user. If other values are used, they will be stated. It is recognized that the manufacturer's specifications and instructions for installation and operation apply during all steps. The tests specified in this document are not necessarily sufficient for instruments specifically designed for unusually arduous conditions. Conversely, a reduced series of tests can serve adequately for instruments designed to perform within a more limited range of conditions. When a full evaluation, in accordance with this document, is not required or possible, only the tests which are required are performed and the results reported in accordance with the relevant parts of this document. In such cases, the test report will state that it does not cover the full number of tests specified herein. This second edition cancels and replaces the first edition published in 2000. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) in 6.6.8 and Table 5, the magnetic field has been changed from 100 A/m to of 30 A/m (Mean Root Square);
b) 6.10.4 and Figure 9 have been modified for better understandability;
c) in 7.4, the reference to IEC 61187 has been deleted and replaced with a new Table 4: Document information.

IEC 63522-46:2026 is used for testing along with the appropriate severities and conditions for measurements and tests designed to assess the ability of DUTs to perform under expected conditions of transportation, storage and all aspects of operational use.
This document defines a standard test method for impulse voltage test.

This document defines general technical terms used in many non-destructive testing disciplines.

This document specifies a procedure for determining the point resolution, called Scherzer resolution, of high-resolution transmission electron microscopes (HREM), which can visualize sample structure with sub-nanometre fineness. This document also specifies the measurement procedure of the real spherical aberration coefficient of the objective lens used. The procedure specified in this document for measuring the spherical aberration coefficient uses the dark rings that appear in the fast Fourier transform (FFT) pattern of HREM images of amorphous thin films, in which, at least three dark rings need to be observable near the Scherzer focus. Therefore, this document is applicable to HRTEMs equipped with a cold field emission gun (CFEG), Schottky emission gun (SEG) or thermal field emission gun (TFEG), or HREMs equipped with a thermionic emission gun (TEG) in which three or more dark rings can be clearly observed in the FFT pattern. This document does not treat the information limits, lattice resolution and STEM resolution. In addition, this document is not applicable to Cs-corrected TEM.

IEC TS 62607-12-3:2026, which is a Technical Specification, establishes a standardized method to determine the key control characteristic
• Schottky barrier height (SBH)
from the temperature-dependent current–voltage characterization results obtained from two-dimensional (2D) material-based electronic devices.
This document
• defines the Schottky barrier formed from the interface between a 2D material and a metal;
• specifies a 2D device sample for the measurement of the Schottky barrier;
• specifies the measurement procedure for the Schottky barrier formed at the interface within 2D devices;
• provides proper mathematical formulas used to extract the Schottky barrier formed from 2D-materials-based devices;
• provides relevant case studies; and
• provides relevant references

This document specifies the methodology for the design, planning, and execution of an interlaboratory study (ILS) and calculation of precision estimates of a test method specified by the study. In particular: it defines the relevant statistical terms, it specifies the procedures to be adopted in the planning and execution of an ILS to determine the precision of a test method, and it specifies the method of calculating the precision from the results of such a study. The procedures in this document have been designed specifically for petroleum and petroleum related products, which are normally considered as homogeneous. However, the procedures described in this document can also be applied to other types of homogeneous products.

IEC 63474:2026 specifies methods of measurement of electrical power in networked standby mode and the reporting of the results for edge equipment.
The measurement of power and energy use in non-active mode, other than networked standby mode, is covered by IEC 62301, including the input voltage range.
This document applies to edge equipment that is powered by:
– low voltage mains AC power (LV ≤ 1 000 V AC), or
– an external power supply that provides low voltage (LV ≤ 1 000 V) or extra low voltage (ELV ≤ 50 V) AC or DC power, or
– a separate source of extra low voltage DC power (ELV ≤ 50 V DC), or
– an internal main battery
Conditions that are outside the scope of this document are as follows:
– active modes (primary function)
– other non-active modes (which are either covered by IEC 62301 or by specific product group standards),
– conditions where main batteries are being charged other than in maintenance mode,
– disconnected condition of the equipment.
This document applies to the following product groups where a networked standby mode present:
– edge equipment with a network reactivation function, such as household appliances, information technology equipment, audio, video and multimedia systems and equipment,
– digital radio receivers with an emergency warning function,
– gas burning equipment with electrical components.
NOTE 1 The measurements of power, energy use and performance of products during their intended use (when performing their primary functions) are generally specified in product standards and are not covered by this document.
NOTE 2 Interconnecting equipment (equipment that provides network infrastructure and function) is outside the scope of this document. Measurement of electrical power in networked standby mode for interconnecting equipment is the subject of ETSI standard EN 303 423.
This document also provides a method to test power management and to test whether it is possible to deactivate wireless network connection(s).
NOTE 4 Edge equipment can also include auxiliary batteries.
This document has the status of a horizontal publication in accordance with IEC GUIDE 108.
This second edition cancels and replaces the first edition published in 2023. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- the scope and the measurement method were extended to battery operated products;
- terms and definitions, and measurement conditions have been updated and aligned for both IEC 62301 (ED3) and this document, IEC 63474 (ED2)

This document provides the workflow and technical requirements for perceiving, evaluating and avoiding collisions among orbiting objects, data requirements for these tasks, identifies techniques that can be used to estimate either the probability or the consequence of collisions, or both, and provides requirements and guidance for executing collision avoidance manoeuvres.

IEC 61298-2:2026 specifies general methods and procedures for conducting tests and reporting on the functional and performance characteristics of process instrumentation except process measurement transmitters (PMT) which are standardized by IEC 62828 series. The tests are applicable to any such devices characterized by their own specific input and output variables, and by the specific relationship (transfer function) between the inputs and outputs and include analogue and digital devices. For devices that require special tests, this standard can be used, together with any product specific standard specifying special tests. This document covers tests made under reference conditions.
This third edition cancels and replaces the second edition published in 2008. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) Process measurement transmitters (PMT) have been removed from the scope of this standard

This document provides the specifications, requirements and test methods for non-petroleum-based fluids used in road-vehicle hydraulic brake and clutch systems that are designed for use with such fluids and equipped with seals, cups or double-lipped type gland seals made of styrene-butadiene rubber (SBR) and ethylene-propylene elastomer (EPDM).

IEC 61298-3:2026 specifies general methods and procedures for conducting tests and reporting on the functional and performance characteristics of process instrumentation except process measurement transmitters (PMT) which are standardized by IEC 62828 series. The tests are applicable to any such devices characterized by their own specific input and output variables, and by the specific relationship (transfer function) between the inputs and outputs and include analogue and digital devices. For devices that require special tests, this document can be used, together with any product-specific standard specifying special tests. This document covers tests for the effects of influence quantities. This third edition cancels and replaces the second edition published in 2008. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) process measurement transmitters (PMT) have been removed from the scope of this document;
b) contents of subclauses referring to EMC and electrical safety have been deleted, only leaving reference to the IEC standards.

IEC TR 62908-1-3:2026, which is a technical report, provides general information on pen touch technology with the aim toward standardization. This document includes an overview of the pen touch technology, critical performance characteristics, issues of characteristics measurements, and other information. The purpose of this document is to provide an overview of the different products available in pen touch technology. The companies and products named in this document do not constitute an endorsement by IEC of these products. This second edition cancels and replaces the first edition published in 2021. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) add writing characteristics as physical properties of interaction between a pen and a surface of a screen;
b) add example of frictional response between paper and pencil, AGL and touch pen, and glass and touch pen;
c) add example of touch display used in the classroom regarding writing and optical characteristics.

IEC 61298-1:2026 specifies general methods and procedures for conducting tests and reporting on the functional and performance characteristics of process instrumentation except process measurement transmitters (PMT) which are standardized by the IEC 62828 series. The tests are applicable to any such devices characterized by their own specific input and output variables, and by the specific relationship (transfer function) between the inputs and outputs and include analogue and digital devices. For devices that require special tests, this document can be used together with any product specific standard specifying special tests. This document covers general principles which apply to the IEC 61298 series.
This third edition cancels and replaces the second edition published in 2008. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) Process measurement transmitters (PMT) have been removed from the scope of this standard.

This document is applicable to aseptically processed or terminally sterilized finished prefilled syringes (intended for single use only) based on syringe barrel components addressed in ISO 11040-4 or ISO 11040-6, together with a plunger stopper (sealing the back end) based on components addressed in ISO 11040-5 and a front end closure for parenteral preparations with focus on quality, functional performance and safety requirements, as well as relevant test methods. Finished prefilled syringes which have undergone an additional preparation step by the user before injection (e.g. diluent-containing syringes that have been emptied for reconstitution and in which the reconstituted injectable product has been aspirated after reconstitution) are excluded from the scope of this document. NOTE 1 This document can also be used as a guidance for other types, designs and/or sizes of finished prefilled syringes, for example dual chamber prefilled syringes. NOTE 2 For finished prefilled syringes that are used in needle-based injection systems, see also ISO 11608 (all parts). NOTE 3 Attention is drawn to applicable national or regional regulations and pharmacopoeias, such as Ph.Eur. [2], USP [3] or JP [4]. NOTE 4 Finished prefilled syringes for parenteral preparations which are medical devices or which, according to the principal mode of action of the product (i.e. the means by which the product achieves its principal intended action), are borderline between medical devices and medicinal products fall within the scope of this document, even if they are not always regulated as medicinal products.

This document specifies guidelines and requirements for the creation and use of intelligent transport system (ITS) station facilities layer service "message sets" (ITS-MsgSets). This includes specification of the basic structure of ITS-MsgSets, the creation of a message as a concatenation of messages from ITS-MsgSets, and the reception of respective messages.

This document specifies characteristics to be measured and applicable measurement methods of nanoporous silica microparticles in powder form used as stationary phases in liquid chromatography. This document does not cover materials with surface treatments after manufacturing, and characteristics specific for health, the environment and safety issues. NOTE 1 Silica and hybrid silica are both covered.

This document gives guidance for leaders operating in collaborative arrangements in alignment with the structure of ISO 44001.

IEC 62683-1:2026 establishes the reference dictionary of the general description of classes of low-voltage switchgear and controlgear and their assemblies based on defined properties. This dictionary is used to facilitate the exchange in electronic format of data describing low voltage switchgear and controlgear, their accessories and their assemblies. This document provides clear and unambiguous definitions of a limited number of properties and classes which are mainly used for presentation, selection and identification of products particularly in electronic catalogues. Each property has an unambiguously defined meaning and name, and where relevant, a defined value list, a defined format, and a defined unit. Manufacturer specific features are not covered. This second edition cancels and replaces the first edition published in 2017. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition for reflecting the content of the IEC CDD 62683DB which has been updated with the change requests C00073, C00074, C00081, C00087, C00089, C00098, C00100, C00107, C00111, C00116, C00119, C00122, C00146, C00148, C00159, C00167, C00174 and C00135: a) New device class descriptions: ACC304, ACC305, ACC413, ACC417, ACC503, ACC504, ACC505, ACC512, ACC516, ACC536, ACC537, ACC538, ACC540, ACC541, ACC542, ACC543, ACC544, ACC545, ACC546, ACC547, ACC548. b) New associated properties. c) New assembly class structure: ACC101, ACC102, ACC103, ACC104, ACC106, ACC110, ACC111, ACC112, ACC113, ACC114, ACC115, ACC116, ACC117, ACC118, ACC119, ACC120, ACC121, ACC123, ACC124, ACC125, ACC126, ACC127, ACC131, ACC132, ACC133, ACC135, ACC141, ACC142, ACC143, ACC144, ACC145, ACC146, ACC147, ACC148, ACC150, ACC151, ACC152, ACC153, ACC154, ACC155, ACC156, ACC157, ACC158, ACC159, ACC160, ACC161, ACC162, ACC163, ACC164, ACC165, ACC166, ACC167, ACC170, ACC171, ACC172, ACC173, ACC174, ACC175.

See the scope of IEC/IEEE 62582-4:2022. Adoption is to be implemented without modification.

IEC 60730-2-5:2026 applies to automatic electrical burner control systems for the automatic control of burners for oil, gas, coal or other combustibles intended to be used - for household and similar use; - in shops, offices, hospitals, farms and commercial and industrial applications; NOTE 1 Throughout this document, where it can be used unambiguously, the word "system" means "burner control system" and "systems" means "burner control systems". - for equipment that is used by the public, such as equipment intended to be used in shops, offices, hospitals, farms and commercial and industrial applications; NOTE 2 Throughout this document, the word "equipment" means "appliance and equipment." EXAMPLE 1 Controls for commercial catering, heating and air-conditioning equipment. - that are smart enabled controls; EXAMPLE 2 Remote interfaces/control of burner operations. - that are AC or DC powered controls with a rated voltage not exceeding 690 V AC or 600 V DC; - used in, on, or in association with equipment that use electricity, gas, oil, solid fuel, solar thermal energy, etc., or a combination thereof; - utilized as part of a control system or controls which are mechanically integral with multifunctional controls having non-electrical outputs; - using NTC or PTC thermistors and to discrete thermistors, requirements for which are contained in Annex J; - that are mechanically or electrically operated, responsive to or controlling such characteristics as temperature, pressure, passage of time, humidity, light, electrostatic effects, flow, or liquid level, current, voltage, acceleration, or combinations thereof; - as well as manual controls when such are electrically and/or mechanically integral with automatic controls. NOTE 3 Requirements for manually actuated mechanical switches not forming part of an automatic control are contained in IEC 61058-1-1. This document is applicable - to a complete burner control system; - to a separate programming unit; - to a separate electronic high-voltage ignition source; - to a separate flame detector, and - to a separate high-temperature operation (HTO) detector. - to a burner control system intended to be used in warm air heating appliances (furnaces) where the appliance is equipped with an electromechanical differential pressure control to monitor the difference of the combustion air pressure (Type 2.AL). This pressure control provides a switch as an alternative to one of the two switching elements to directly de-energize the safety relevant terminals. This document does not apply to thermoelectric flame supervision controls; thermoelectric flame supervision controls are covered by ISO 23551-6:2021. This document also applies to electrical burner control systems intended exclusively for industrial process applications e.g. those applications covered by ISO TC 244 (ISO 13577 series). This document applies to controls powered by primary or secondary batteries, requirements for which are contained within the standard. This document applies to - the inherent safety of automatic electrical burner control systems, and - functional safety of automatic electrical burner control systems, - automatic electrical burner control systems where the performance (for example the effect of EMC phenomena) of the product can impair the overall safety and perfo